Nikon-logo

Nikon MH-26 Battery Charger User Manual

Nikon-MH-26-Battery-Charger-product

Contacts

Nikon-MH-26-Battery-Charger-fig- (1)

Contact protector (× 2) 

Wall plug

Nikon-MH-26-Battery-Charger-fig- (3)

AC adapter plug

Nikon-MH-26-Battery-Charger-fig- (4)

Power cable

Nikon-MH-26-Battery-Charger-fig- (5)

  • Shape of cable depends on country.

AC inlet

Rechargeable Li-ion Battery (sold separately)

  • The external appearance of the MH-26 may differ slightly from the illustration depending on the country or area of purchase.

Thank you for your purchase of an MH-26 battery charger for up to two Nikon EN-EL18 rechargeable Li-ion batteries. Batteries are recharged in the order in which they are inserted. The MH-26 is equipped with battery calibration feature and charge lamps that glow, blink, or turn off according to the battery charge state.

Calibration
Calibration allows precise measurement of battery charge, ensuring that the battery level can be displayed more accurately.

Rechargeable Li-ion Batteries
Li-ion batteries can transmit information on battery state when connected to compatible devices. Before use, read the warnings and other information in this manual and in the documentation for your Nikon EN-EL18 rechargeable Li-ion battery.

CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS. This symbol indicates that this product is to be collected separately. The following apply only to users in European countries:

  • This product is designated for separate collection at an appropriate collection point.
  • Do not dispose of as household waste.
  • For more information, contact the retailer or the local authorities in charge of waste management.

Safety Precautions

  • To ensure proper operation, read this manual thoroughly before using this product. After reading, be sure to keep it where it will be read by all those who use the product.
  • Precautions for Use: MH-26 Battery Charger
  • IMPORTANT: The Nikon MH-26 battery charger can be used to charge Nikon EN-EL18 rechargeable lithium-ion batteries only. It can not be used with other batteries.
  • Charge indoors at ambient temperatures between 5 and 35 °C (41 to 95 °F).
  • The temperature of some parts of the device may become elevated while it is plugged in. Maintaining contact with the device for prolonged periods could result in low-temperature burns.
  • Do not use this product with non-compatible batteries.
  • Unplug the power cable from the power outlet when not in use.
  • Young children should be supervised to ensure that they do not play with the appliance.
  • Do not use with travel converters or adapters designed to convert from one voltage to another or with DC-to-AC inverters. Failure to observe this precaution could damage the product or cause overheating or fi re.
  • Precautions for Use: Nikon EN-EL18 Rechargeable Li-ion Batteries

IMPORTANT
The internal temperature of the bat tery may rise while the battery is in use, espe cially when the ambient temperature is high. If you attempt to recharge the battery while the internal temperature is elevated, the battery will not charge or will charge only partially. The battery may also not function properly. Wait for the battery to cool before charging.

  • The battery is not fully charged at the factory. Charge the battery before use.
  • When recharging the battery, the ambient temperature should be between 0 to 40 °C (32 to 104 °F) or the battery may not fully charge or may not function properly.
  • The battery will not charge if its temperature is below 0 °C (32 °F) or above 60 °C (140 °F).
  • Capacity may be reduced and charging times may increase at battery temperatures from 0 °C to 15 °C (32 °F to 59 °F) and from 45 °C to 60 °C (113 °F to 140 °F).
  • The internal temperature of the battery may rise while the battery is in use.
  • Attempting to charge the battery while the internal temperature is elevated will impair battery performance, and the battery may not charge or may charge only partially. Wait for the battery to cool before charging.
  • Do not attempt to recharge a fully-charged battery. Failure to observe this precaution will result in re duced battery performance.
  • Should you no.tice smoke or an unusual smell coming from the charger, unplug it, taking care to avoid burns. Take the charger to a Nikon-authorized service representative for inspection.
  • Charging Nikon EN-EL18 Re chargea ble Li ion Batteries

Figure 2
illustration shows EN-EL18 inserted in chamber The procedure for charging batteries in chamber R is the identical.)

  1. Plug the AC adapter plug into the charg er (Fig ure 2-a).
  2. Plug the wall plug into a power outlet. All lamps will remain off .
  3. Insert the battery (terminals fi rst), aligning the end of the battery with the guide and then sliding the battery in the direction indicated until it clicks into place (Figure 2-b). Charging will begin when the battery is inserted.

The Charge and Calibration Lamps
There is one set of charge lamps, while each chamber has its own chamber and calibration lamps and calibration button. The chamber and charge lamps blink while the battery recharges: If a calibration lamp blinks, the battery in that chamber needs to be calibrated to ensure that its charge state can be accurately measured. To begin calibration, press the calibration button for the indicated chamber for about a second.

Nikon-MH-26-Battery-Charger-fig- (6)

When calibration is complete, the calibration and charge lamps will turn off and charging will begin immediately. The time needed to calibrate the battery is shown as follows: Although calibration is recommended for accurate measurement of battery charge state, calibration need not be performed when the calibration lamp blinks. Once begun, calibration can be interrupted as desired.

Nikon-MH-26-Battery-Charger-fig- (7)

  • If the calibration button is not pressed while the calibration lamp is blinking, normal charging will begin after about ten seconds.
  • To interrupt calibration, press the calibration button again. Calibration will end and charging will begin.Nikon-MH-26-Battery-Charger-fig- (8)

Charging Two Batteries

The MH-26 charges only one battery at a time. If batteries are inserted in both chambers, they will be charged in the order inserted. If the calibration button for the fi rst battery is pressed, the second battery can not be calibrated or charged
until calibration and charging of the fi rst battery are complete. When charging is complete, slide the battery out of the charger in the reverse direction to that shown in Figures 2-b. Unplug the charger. When the charger is not in use, replace the contact protectors to prevent dust from accumulating on the charger contacts.

Battery Warning
If the chamber and calibration lamps fl ash on and off in sequence when no battery is inserted, there is a problem with the charger. If the chamber and calibration lamps fl ash on and off in sequence when a battery is inserted, a problem has occurred with the battery or charger during charging. Remove the battery, unplug the charger, and take the battery and charger to a Nikon authorized service representative for inspection.

Specififications

  • Rated input: AC 100 to 240 V, 50/60 Hz
  • Charging output: DC 12.6 V, 1.2 A
  • Applicable batteries: Nikon Rechargeable Li-ion Battery EN-EL18
  • Charging time: Approx. 2 hours 20 minutes at an ambient temperature of 25 °C (77 °F) when no charge remains
  • Operating temperature: 0 to 40 °C (32 to 104 °F)
  • Dimensions (W × H × D): Approx. 160 × 85 × 50.5 mm (6.3 × 3.3 × 2 in.)
  • Length of power cable: Approx. 1.5 m (4.9 ft)
  • Weight: Approx. 265 g (9.3 oz), excluding power cable

Improvements to this product may result in unannounced changes to specifi cations and external appearance.

Download PDF: Nikon MH-26 Battery Charger User Manual

References

Leave a comment

Your email address will not be published. Required fields are marked *