Geekworm-logo

Geekworm N100 Metal Case Enclosure with Power and Reset Control Switch

Geekworm-N100-Metal-Case-Enclosure-with-0Power-and-Reset-Control-Switch-product,,..

Product Information

Specifications

  • Compatible with: Jetson Nano B01 version & T201, Jetson Nano A02 version & T201, Jetson Nano 2GB (NEW) & T201, NVIDIA Jetson Xavier NX developer kit
  • WiKi: wiki.geekworm.com/N100

Product Usage Instructions

Installation

For detailed installation instructions, please refer to the user manual on the provided WiKi page or scan the QR code.

Make sure to watch the installation videos specific to your development board:

Note: Remove the 2pcs metal cover in front of the USB3 and HDMI  port when using N100-V12 with Jetson Nano A02, B01, and Jetson Xavier NX.

How to Connect:

For Jetson Nano A02, connect the blue wire to the 3.3V pin at J41 and the white wire to the GND pin at J41.

Cooling Fan

The case reserves a 22mm high fan installation height. It is recommended to use a Noctua NF-A4x20 5V PWM fan. The package includes 4pcs PM2.5*22 screws, 4 pcs M2.5 nuts, and 4 pcs gaskets for fan installation. Use ABS tweezers during fan installation.

FAQ

If you have any further questions or need support, please contact support@geekworm.com

The latest version N100-V12 case is compatible with:

  1. Jetson Nano B01 version & T201
  2. Jetson Nano A02 version & T201
  3. Jetson Nano 2GB (NEW) & T201
  4. NVIDIA Jetson Xavier NX developer kit

Geekworm-N100-Metal-Case-Enclosure-with-0Power-and-Reset-Control-Switch-product

Wiki: wiki.geekworm.com/N100, or scan the QR code for the user manual and installation video.

√Please refer to our wiki page about the user manual according to the development board you use!!!

Installation video

Geekworm-N100-Metal-Case-Enclosure-with-0Power-and-Reset-Control-Switch-fig3

  • Video 1: For NVIDIA Jetson Xavier NX: youtu.be/7Cqr9R04htc
  • Video 2: For Jetson Nano 2GB/B01: youtu.be/Q5n2Aa_z0qI
  • Video 3: For Jetson Nano A02: youtu.be/SpUB6h4Akp4
    • Note: Please remove the 2pcs metal cover in front of the USB3 and HDMI port when using N100-V12 with Jetson Nano A02 and B01 and Jetson Xavier NX

FAQ

  • Q1: Why was the MICRO SD card slot canceled?
  • Q2: How to choose the right power supply?
    • A: JETSON NANO supports two kinds of interface power supply: Micro USB power adapter and DC Jack power adapter; You can choose a different power adapter by controlling the jumper of J48; We strongly recommend that you use DC Jack PSU, because DC Jack can provides greater current input than Micro USB.
  • Q3: Is it compatible with the NVIDIAJetson Xavier NX developer kit?
    • A: Yes, but you will need an extra 2pcs WiFi Antenna with IPEX MHF4 to RP SMA Female Extension Cable to use together with this N100-V9 Case.
    • To use the WiFi antennas, it needs to remove the bottom holder of the NVIDIA Jetson Xavier NX. Then install the antennas.
  • Q4: How do I use a jumper?
    • A: Because this case has a power switch, you need to disable the AUTO ON function first. Please insert the jumper cap into the AUTO ON position of the J40 pin to disable the AUTO ON function when used with the Jetson Nano B01 and A02 versions.

How to connect? (For Jetson Nano 2GB, please refer to B01 )

Geekworm-N100-Metal-Case-Enclosure-with-0Power-and-Reset-Control-Switch-fig1

Supplement for Rev A02: The blue wire =>3.3V pin at J41; White wire => GND pin at J41

About cooling fan

The case is reserved for a 22mm high fan installation height, it is recommended to use Noctua NF-A4x20 5V PWM fan, we prepare 4pcs PM2.5*22 screws and 4pcs M2.5 nuts and 4 pcs gaskets to install this fan. You need to use the ABS tweezers when you install this fan.

Documents / Resources

Geekworm N100 Metal Case Enclosure with Power and Reset Control Switch [pdf] User Manual
N100-V12, N100 Metal Case Enclosure with Power and Reset Control Switch, Case Enclosure with Power and Reset Control Switch, Power and Reset Control Switch, Reset Control Switch, Control Switch, T201, B01, A02, 2GB

References

Leave a comment

Your email address will not be published. Required fields are marked *