SLXD3, SLXD5
Shure SLX-D Digital Wireless
Print quick start guide for SLXD5.
Version: 0.1 (2023-D)
IMPORTANT SAFETY INSTRUCTIONS
- READ these instructions.
- KEEP these instructions.
- HEED all warnings.
- FOLLOW all instructions.
- DO NOT use this apparatus near water.
- CLEAN ONLY with dry cloth.
- DO NOT block any ventilation openings. Allow sufficient distances for adequate ventilation and install in accordance with the manufacturer’s instructions.
- DO NOT install near any heat sources such as open flames, radiators, heat registers, stoves, or other apparatus (in cluding amplifiers) that produce heat. Do not place any open flame sources on the product.
- DO NOT defeat the safety purpose of the polarized or grounding type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wider blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replace ment of the obsolete outlet.
- PROTECT the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
- ONLY USE attachments/accessories specified by the manufacturer.
- USE only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
- UNPLUG this apparatus during lightning storms or when unused for long periods of time.
- REFER all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
- DO NOT expose the apparatus to dripping and splashing. DO NOT put objects filled with liquids, such as vases, on the apparatus.
- The MAINS plug or an appliance coupler shall remain readily operable.
- The airborne noise of the Apparatus does not exceed 70dB (A).
- Apparatus with CLASS I construction shall be connected to a MAINS socket outlet with a protective earthing connec tion.
- To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
- Do not attempt to modify this product. Doing so could result in personal injury and/or product failure.
- Operate this product within its specified operating temperature range.
This symbol indicates that dangerous voltage constituting a risk of electric shock is present within this unit.
This symbol indicates that there are important operating and maintenance instructions in the literature accom panying this unit.
WARNING
- Battery packs may explode or release toxic materials. Risk of fire or burns. Do not open, crush, modify, disassemble, heat above 140°F (60°C), or incinerate.
- Follow instructions from manufacturer
- Only use Shure charger to recharge Shure rechargeable batteries
- WARNING: Danger of explosion if battery incorrectly replaced. Replace only with same or equivalent type.
- Never put batteries in mouth. If swallowed, contact your physician or local poison control center
- Do not short circuit; may cause burns or catch fire
- Do not charge or use battery packs other than Shure rechargeable batteries
- Dispose of battery packs properly. Check with local vendor for proper disposal of used battery packs.
- Batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like
- Do not immerse the battery in liquid such as water, beverages, or other fluids.
- Do not attach or insert battery with polarity reversed.
- Keep away from small children.
- Do not use abnormal batteries.
- Pack the battery securely for transport.
Important Product Information
LICENSING INFORMATION
Licensing: A ministerial license to operate this equipment may be required in certain areas. Consult your national authority for possible requirements. Changes or modifications not expressly approved by Shure Incorporated could void your authority to operate the equipment. Licensing of Shure wireless microphone equipment is the user’s responsibility, and licensability de pends on the user’s classification and application, and on the selected frequency. Shure strongly urges the user to contact the appropriate telecommunications authority concerning proper licensing, and before choosing and ordering frequencies.
Australia Warning for Wireless
WARNING:This device operates under an ACMA class licence and must comply with all the conditions of that licence including operating frequencies.
Canada Warning for Wireless
This device operates on a noprotection, nointerference basis. Should the user seek to obtain protection from other radio ser vices operating in the same TV bands, a radio licence is required. For further details, consult Innovation, Science and Econom ic Development Canada’s document Client Procedures Circular CPC2128, Voluntary Licensing of LicenceExempt LowPow er Radio Apparatus in the TV Bands.
SLXD3/SLXD5 Features
- Transparent 24-bit digital audio
- Extended 20 Hz to 20 kHz frequency range (microphone dependent)
- Easy pairing of transmitters and receivers over IR scan and sync
- Automatic channel scan
- Remote monitoring and control via ShurePlus™ Channels app
- Elegant and easy-to-use interface with high-contrast OLED menu
System Components
SLXD5 Bodypack Receiver
- SLXD5 bodypack receiver
- Locking 3.5mm-to-XLR cable (18″)
- Locking 3.5mm audio extender cable (16″)
- 1.5V AA batteries (2)
- Standard ¼” thread non-conductive camera shoe adapter
Note: Use this adapter to prevent ground loop noise - Zippered vinyl bag (black)
SLX-D Transmitters
- SLXD1 bodypack (BP) transmitter
- SLXD2 handheld (HH) transmitter
- SLXD3 plug-on (PO) transmitter
Transmitters
- Power LED
– Green = Unit is powered on
– Red = Low battery - On/off switch
Powers the transmitter on or off. - Display
View menu screens and settings. Press any control button to activate the display. - IR port
Align with the receiver IR port during an IR sync for automated transmitter programming. - Menu navigation buttons
menu = Use to navigate between menu screens.
enter = Press to confirm and save parameter changes. - Battery compartment
Requires 2 AA batteries or a Shure SB903 rechargeable battery. - Battery cover
Protects battery compartment during use. - Bodypack antenna
For RF signal transmission. - Handheld integrated antenna
For RF signal transmission. - Microphone cartridge
Interchangeable with a variety of Shure cartridges. - TA4M input port
Connects to a 4-Pin Mini Connector (TA4F) microphone or instrument cable. - Locking XLR connector
Connection point for wired microphones, cables, and boom poles, among other things. To release the XLR connector, turn the ring counterclockwise and push in. - Microphone LED
Indicates audio input from connected microphone, regardless of receiver status.
Transmitter Menu Options and Navigation
The transmitter features individual menu screens for setting up and adjusting the transmitter. To access the menu options from the home screen, press the menu button. Each additional press of the menu button advances to the next menu screen. Use the enter button to select and confirm options on the active menu screen.
Home Screen | Use the enter button to select one of the following home screen displays: • Channel name/Group and channel/Battery icon • Channel name/Frequency/Battery icon • Channel name/Battery icon/Group and channel • Channel name/Battery icon |
Mic Offset | Match audio levels between two transmitters used in a combo system. Range is 0 to 21 dB (3 dB increments). |
RF Power | Select an RF power setting: • 1 mW • 10 mW • 30 mW* *SLXD3 only |
High Pass | Turn the high pass filter On or Off |
Battery | To ensure accurate battery metering, set the battery type to match the installed AA battery type. Note: Menu is not selectable when Shure rechargeable batteries are installed. |
Auto Lock | Turn the transmitter auto lock on or off |
Lock Type | Determine auto lock behavior: • Menu Only: Locks the menu to prevent transmitter settings from being changed • Menu & Power: Locks the menu and disables the power switch |
Phantom Power* | Select a phantom power setting: • Off (default setting) • +12 V • +48 V *SLXD3 only |
Pad/Boost* | Select input pad or boost to avoid overloading the audio input, or increase low-output audio sources: • Off (default setting) • Pad: −12 dB • Boost: +12 dB *SLXD3 only |
About | Displays the firmware, hardware, and band information |
SLXD5 Hardware Callouts
- Antennas
Dual integrated ¼-wave receiver antennas - ⅛” (3.5mm) camera audio output
Impedance Balanced (Tip: audio+, Ring: audio-, Sleeve: ground) - Power switch
Powers receiver on or off. - ⅛” (3.5mm) headphone output
Impedance Balanced (Tip: audio+, Ring: audio-, Sleeve: ground) - RF LED
◦ Flashing: IR sync mode is enabled
◦ Solid: Receiver and transmitter aligned for IR sync - Power LED
◦ Green: Ready for use
◦ Red: Charging
◦ Yellow: Error - Enter button
Press to confirm the current selection. - Exit button
Press to cancel and exit the current operation. - Display
Shows menu options, receiver and transmitter settings. - Up/down buttons
Change menu parameters. - Battery door latch
Push up to access battery compartment. - IR Window
Align with the transmitter IR port during an IR sync to program transmitters. - Sync button
Press to activate IR sync. - Belt clip mounting holes
Insert belt clip prongs to attach; push out on sides of clip to remove. - Tripod connector
Standard ¼” internally threaded connector for included non-conductive camera shoe adapter, or tripod mounting. - Power supply input
Connection point for USB-C power supply.
SLXD5 Menus and Configuration
From the home screen, press Enter to see your menu options. Use the arrow keys to cycle through options, push Enter to confirm your selection, or press Exit to return to the previous screen.
Frequency Setup | Manual Setup Manually tune the receiver to a desired frequency Start Channel Scan Receiver automatically scans for available channels within the selected group Start Group Scan Receiver automatically scans for the best available group, if applicable. Note: Some bands consist of only a single group. RF performance is the same in single-group bands as in bands that support multiple groups. |
Audio Gain | Monitor audio levels and adjust the receiver gain for both the audio out and headphone out |
Channel Name | Customize the channel name |
Mic/Line | Switch between output levels |
Device Settings | Device Lock ◦ Unlock: Receiver is unlocked ◦ Menu Only: Receiver settings are locked ◦ Menu & Power: Receiver settings and power button are locked Device Preset Save current receiver settings or restore last saved settings Battery To ensure accurate battery metering, set the battery type to match the installed AA bat tery type. Note: Menu is not selectable when Shure rechargeable batteries are installed. Buttons Control Determine the function of the up/down buttons from the home screen: ◦ Home Screen (default): Change the home screen display ◦ Audio Out: Change audio gain to the camera ◦ Headphone: Change headphone volume Tone Generator Turn the continuous test tone on or off, and set volume in dB Factory Reset Restores all settings to factory defaults following a system reboot |
About Displays firmware version and serial number |
|
Transmitter Settings | Tx Presets Apply and sync transmitter presets: ◦ Mic Offsets: Match audio levels between transmitters used in a combo system. Range is 0 to 21 dB (3 dB increments). ◦ Pad/Boost: Adjust the pad to avoid overloading the audio input or add a boost to low- output sources: 12 dB: Use with high output sources, such as line levels and pointtopoint applications. Off (default): Use with typical microphones. +12 dB: Use with low output sources. ◦ RF Power: Select an RF power setting: HH/BP: Low = 1 mW High = 10 mW No change PO: Low = 1 mW High = 10 mW No change Lock Type: Determine auto lock behavior: ◦ Menu Only: Locks the menu to prevent transmitter settings from being changed Menu & Power: Locks the menu and disables the power switch Auto Lock: Turn the transmitter auto lock On or Off ◦ Battery Type: To ensure accurate battery metering, set the battery type to match the in ◦ stalled AA battery type. Note: Menu is not selectable when Shure rechargeable batteries are installed. High Pass: Turn the high pass filter On or Off ◦ Phantom: Adds phantom power for condenser microphones. Select +12V or +48V as re ◦ quired by the microphone. Tx Firmware Update transmitter firmware using IR sync Tx Factory Reset Reboots the transmitter and restores all settings to factory defaults |
Multi-Mic Mode | Enter Mode/List |
Enters Multi-Mic Mode and displays the existing list ◦ Select a list item and press Enter to rename, set gain, or delete that item ◦ Press the Sync button to IR sync the selected frequency to a transmitter Create List Initiates a group scan to determine available frequencies, creates a new list from those frequencies Add Current Freq Adds the currently-selected frequency to the Multi-Mic Mode list Copy/Paste Copy the existing Multi-Mic Mode list to another receiver using IR sync |
|
Help | Provides a QR code link to additional materials |
- SLXD5 Setup
With the power switch in the — (off) position, insert the battery or connect the USB-C port on the bottom to a suitable power source. - Connect the audio output to an amplifier or mixer.
- Turn on the power by pushing the switch to the O (on) position. Use the menu to set the system to microphone (mic) or instrument (line) level as appropriate.
Microphone Battery Installation
Important: To avoid damaging transmitters, only use Shure SB903 Li-ion rechargeable batteries or 1.5V AA batteries.
Bodypack / Plug-On:
- Push the tab up and open the battery door to access the battery compartment.
- Place a Shure SB903 Li-ion rechargeable battery or 2 AA batteries in the compartment.
- Close the battery door.
Handheld:
- Remove the battery cover to access the battery compartment.
- Lift the battery door to open the battery compartment.
- Place a Shure SB903 Li-ion rechargeable battery or 2 AA batteries in the compartment.
- Replace the battery cover.
What are Groups and Channels?
To minimize interference, Shure wireless systems organize RF bands into predefined groups and channels. A group is a set of compatible frequencies within a frequency band. A single frequency within a group is a channel. Tune a receiver and trans mitter to the best available channel within its group to set up your system.
Note: Because groups are banddependent, some systems don’t have multiple groups. Singlegroup bands have the same RF performance as those with mul tiple groups.
All receivers in the same band should be set to the same group. You can set them manually, or use the Guided Frequency Set up to walk you through the process.
Connect all the receivers in your system using Ethernet cables. For best results, use a network switch when connecting 3 or more receiver units.
Important! To avoid interference, before you begin:
Turn off all transmitters for the systems you are setting up. This prevents them from interfering with the frequency scan.
Turn on the following devices so they are operating as they would be during the presentation or performance. This will allow the scan to detect and avoid any interference from these devices:
- Configured wireless systems or devices
- Computers
- Large LED panels
- Effects processors
- CD players
Manual Frequency Selection
To manually adjust group, channel or frequency:
- Select 1. Frequency Setup > 1.4 Manual Frequency Setup from the receiver menu.
- Use the control knob to select and adjust the group (G), channel (C), or frequency (MHz).
- Select apply and push the control knob to save.
More Information Available Online
A comprehensive online user guide is available at pubs.shure.com.
Specifications
SLXD3 Plug-On Transmitter
Battery Type
Rechargeable LiIon or 1.5 V AA batteries
Dimensions
126 × 41 × 41 mm (4.96 × 1.61 × 1.61 in.), H×W×D
Weight
200 g
Housing
Aluminum, zinc alloy, PC/ABS
Audio Input
Connector Type
XLR
See drawing for details
Maximum Input Level
1 kHz at 1% THD
1 kHz at 1% THD | |
Pad -12 dB | 20.5 dBV |
0 dB | 8.5 dBV |
Boost +12 dB | -3.5 dBV |
Note: Dependent on microphone type
Phantom Power
+48 V(7 mA maximum), +12 V(15 mA maximum)
RF Output
Antenna Type
Dipole
Occupied Bandwidth
<200 kHz
Modulation Type
Shure proprietary digital
Power
1 mW / 10 mW / 30 mW
See Frequency Range and Output Power table, varies by region
SLXD5 Bodypack Receiver
Dimensions
107 × 68 × 25.3 mm (4.21 × x 2.68 x 1 in.), H×W×D
Weight
182 g
Housing
Aluminum
Power Requirements
Battery | Rechargeable LiIon, or 1.5 V AA batteries (2) |
Power Supply | SBC-DC-903 Battery Eliminator, or 5V DC via USB-C |
RF Input
Spurious Rejection
>75 dB, typical
Impedance
50 Ω
Phantom Power Protection
Yes
Audio Output
Connector Type
⅛” (3.5 mm) x2
Configuration
Balanced (Tip = audio +, Ring = audio -, Sleeve = ground )
See drawing for details
Transmitter Input
① | Ground (cable shield) |
② | Audio Input Positive |
③ | Audio Input Negative |
Receiver Output Connectors
Frequency Range and Transmitter Output Power
Band | Frequency Range (MHz) | Power ( mW RMS )* (Low/High) |
G58 | 470 to 514 | 1 / 10 / 30** |
G59 | 470 to 514 | 1 / 10 / 30** |
G60 | 470 to 510 | 1 / 10 / 30** |
G61 | 479 to 523 | 1 / 10 |
G62 | 510 to 530 | 1 / 10 / 30** |
H55 | 514 to 558 | 1 / 10 / 30** |
H56 | 518 to 562 | 1 / 10 / 30** |
H57 | 520 to 564 | 1 / 10 |
J52 | 558 to 616 | 1 / 10 / 30** |
J53 | 562 to 606 | 1 / 10 / 30** |
J54 | 562 to 606 | 1 / 10 / 30** |
Band | Frequency Range (MHz) | Power ( mW RMS )* (Low/High) |
JB | 806 to 810 | 1 / 10 |
K59 | 606 to 650 | 1 / 10 / 30** |
L55 | 646 to 690 | 1 / 10 |
L56 | 650 to 694 | 1 / 10 / 30** |
L57 | 650 to 694 | 1 / 10 |
L58 | 630 to 674 | 1 / 10 / 30** |
L59 | 654 to 698 | 1 / 10 / 30** |
M55 | 694 to 703, 748 to 758 | 1 / 10 / 30** |
S50 | 823 to 865 | 1 / 10 |
X51 | 925 to 937.5 | 1 / 10 |
* Power delivered to the antenna port
** 30mW available for SLXD3 only
Note: Frequency bands might not be available for sale or authorized for use in all countries or regions.
Frequencies for European Countries
SLXD- G59 470-514 MHz, max. 1/10 mW |
Country Code | Frequency Range |
A, B, BG, CH, CY, CZ, D, EST | 470 – 514 MHz* | |
F, GB, GR, H, I, IS, L, LT | 470 – 514 MHz* | |
NL, P, PL, S, SK, SLO | 470 – 514 MHz* | |
DK, FIN, M, N | 470 – 514 MHz* | |
HR, E, IRL, LV, RO, TR | 470 – 514 MHz* | |
SLXD- H56 518 – 562 MHz, max. | A, B, BG, CH, CY, CZ, D, EST | 518 – 562 MHz* |
Country Code | Frequency Range | |
1/10 mW | F, GB, GR, H, I, IS, L, LT | 518 – 562 MHz* |
NL, P, PL, S, SK, SLO | 518 – 562 MHz* | |
DK, FIN, M, N | 518 – 562 MHz* | |
HR, E, IRL, LV, RO, TR | 518 – 562 MHz* | |
SLXD- J53 562-606 MHz, max. 1/10 mW | A, B, CH, CZ, D, E, EST | 562–606 MHz* |
F, GB, GR, H, I, IRL, L | 562–606 MHz* | |
LT, M, NL, P, PL, SLO | 562–606 MHz* | |
DK, FIN, N, S | 562–606 MHz* | |
CY, LV, SK | 562–606 MHz* | |
SLXD- K59 606– 650 MHz, max. 1/10 mW | A, B, CH, CZ, D, E, EST | 606–650 MHz* |
F, GB, GR, H, I, IRL, L | 606–650 MHz* | |
LT, M, NL, P, PL, SLO | 606–650 MHz* | |
DK, FIN, N, S | 606–650 MHz* | |
CY, LV, SK | 606–650 MHz* | |
SLXD- L56 650 – 694 MHz, max. 1/10 mW | A, BG, CH, CY, CZ, D, EST | 650 – 694 MHz* |
F, GB, GR, H, I, IS, L, LT | 650 – 694 MHz* | |
P, PL, S, SK, SLO | 650 – 694 MHz* | |
B, DK, FIN, M, N, NL | 650 – 694 MHz* | |
HR, E, IRL, LV, RO, TR | 650 – 694 MHz* | |
SLXD- S50 823– 832 863- 65 MHz max. 1/10 mW | A, BG, CH, CY, CZ, D, EST | 823–832 MHz * |
F, GB, GR, H, I, IS, LT | 823–832 MHz * | |
P, PL, S, SK, SLO | 823–832 MHz * | |
B, DK, E, FIN, HR, IRL, L | 823–832 MHz * | |
LV, M, N, NL, RO, TR | 823–832 MHz * |
* This equipment may be capable of operating on some frequencies not authorized in your region. See Licensing Information.
Certifications
Information to the user
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the manufacturer’s instruction manual, may cause interference with radio and television reception.
Notice: The FCC regulations provide that changes or modifications not expressly approved by Shure Incorporated could void your authority to operate this equipment.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equip ment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruc tions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be de termined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
This device operates on frequencies shared with other devices. Consult the Federal Communications Commission White Space Database Administration website to determine available channels in your area prior to operation.
This device contains licenceexempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Develop ment Canada’s licenceexempt RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
These transmitters have been tested and found to comply with international radiation exposure limits set forth for an uncon trolled environment. This equipment is in direct contact with the body of the user under normal operating conditions. These transmitters must not be co-located or operating in conjunction with any other antenna or transmitter.
Certified under FCC Part 15 and FCC Part 74.
Certified by ISED in Canada under RSS-102 and RSS-210.
CAN ICES-003 (B)/NMB-003(B)
Approved under the Declaration of Conformity (DoC) provision of FCC Part 15.
Meets essential requirements of the following European Directives:
- WEEE Directive 2012/19/EU, as amended by 2008/34/EC
- RoHS Directive EU 2015/863
Note: Please follow your regional recycling scheme for batteries and electronic waste
This product meets the Essential Requirements of all relevant European directives and is eligible for CE marking.
Registration, Evaluation, Authorization of Chemicals (REACH) Directive
REACH (Registration, Evaluation, Authorization of Chemicals) is the European Union (EU) and the United Kingdom (UK) chemical substances regulatory framework. Information on substances of very high concern contained in Shure products in a concentration above 0.1% weight over weight (w/w) is available upon request.
UKCA Notice:
Hereby, Shure Incorporated declares that this product with UKCA Marking has been determined to be in compliance with UK
CA requirements. The full text of the UK declaration of conformity is available at the following site: https://www.shure.com/enGB/support/declarations-of-conformity.
UK Importer / UK Rep.
Shure UK Limited
Unit 2, The IO Centre, Lea Road,
Waltham Abbey, Essex, EN9 1 AS, UK
CE Notice:
Hereby, Shure Incorporated declares that this product with CE Marking has been determined to be in compliance with Euro
pean Union requirements. The full text of the EU declaration of conformity is available at the following site: https://www.shure.com/en-EU/support/declarations-of-conformity.
Authorized European Importer / Representative:
Shure Europe GmbH
Department: Global Compliance
Jakob-Dieffenbacher-Str. 12
75031 Eppingen, Germany
Phone: +49-7262-92 49 0
Fax: +49-7262-92 49 11 4
Email: EMEAsupport@shure.de
Documents / Resources
SHURE SLX-D Digital Wireless [pdf] User Guide SLXD3J52, DD4SLXD3J52, SLXD5, SLX-D Digital Wireless, Digital Wireless, Wireless |
References
- Product documentation – Shure
- Documentation Finder - Shure Europe
- Documentation Finder - Shure Europe
- Documentation Finder - Shure United Kingdom
- User Manual