Artwork LogoAcura LogoTLX 2015-2017 Front Splitter
Instruction Manual

ASSEMBLY INSTRUCTIONS

ACURA TLX 15-17 • FRONT SPLITTER
BASE MODEL

Artwork Acura TLX 2015 2017 Front Splitter - Assembly

SPACERS SIDE VIEW

Artwork Acura TLX 2015 2017 Front Splitter - SPACERS SIDE VIEW

PARTS LIST MAY DIFFER ACCORDING TO YOUR MODEL
PARTS LIST

Artwork Acura TLX 2015 2017 Front Splitter - Bolts 50mm M8 Bolts x 2
25mm M8 Bolts x 2
Artwork Acura TLX 2015 2017 Front Splitter - Lock Nuts M8 Lock Nuts x 4
Artwork Acura TLX 2015 2017 Front Splitter - Round Spacers 1/4″ Round Spacers x 2
Artwork Acura TLX 2015 2017 Front Splitter - Spacers 1-1/2″ Spacers x 2
Artwork Acura TLX 2015 2017 Front Splitter - Finish Washers 30mm M6 Bolts x 2
M6 Finish Washers x 2
Artwork Acura TLX 2015 2017 Front Splitter - Hex Key M8 Hex Key x 1
M6 Hex Key x 1

* Install your bolt with your hex key by the bottom of your lip

INSTALLATION INSTRUCTIONS

Artwork Acura TLX 2015 2017 Front Splitter - FRONT SPLITTER

TOOLS REQUIRED

Artwork Acura TLX 2015 2017 Front Splitter - Icon CAR JACK & JACK STANDS
Artwork Acura TLX 2015 2017 Front Splitter - Icon PERMANENT MARKER
Artwork Acura TLX 2015 2017 Front Splitter - Icon DRILL
Artwork Acura TLX 2015 2017 Front Splitter - Icon DRILL BITS 5/16
Artwork Acura TLX 2015 2017 Front Splitter - Icon  HARDWARE BAG (INCLUDED)
Artwork Acura TLX 2015 2017 Front Splitter - Icon TORX, PHILLIPS, 10MM BOX (TO REMOVE YOUR SPLASH GUARD, IF NECESSARY)
**CAUTION: PROFESSIONAL INSTALLATION IS STRONGLY RECOMMANDED**

  1. Jack the front of the car for an easy access (don’t forget to put your jack stands).
  2. Align perfectly the lip under the bumper (the tip of the lip should be lined with the corner of your bumper near the wheel, see picture above).
  3. With the permanent marker, mark the drill spot on the bumper through the holes of the lip (the lip should not move if you can’t reach the bumper with your marker, skip to step #4).
  4. Drill in the middle of your marks (or holes) with 5/16 drill bit.
  5. Make an easy access to reach the holes inside the bumper.
  6. Assemble the lip with hardware (see assembly instructions).
  7. Put the lip on the bumper by aligning the bolts through the holes.
  8. Thight all the remaining hardware inside the bumper (nuts & washers), while holding your hex key into the bolt to make sure it won’t turn.
  9. Reinstall all removed trims and you’re ready to rock n roll. Take pictures and send them to info@artworkbodyshop.com and don’t forget to tag us on social media @artworkbodyshop.

Artwork LogoYOUR LOYALTY AS A CUSTOMER IS GREATLY APPRECIATED
© 2022 ARTWORK BODYSHOP

Documents / Resources

Artwork Acura TLX 2015-2017 Front Splitter [pdf] Instruction Manual
Acura TLX 2015-2017 Front Splitter, Acura TLX 2015-2017, Front Splitter, Splitter

References

Leave a comment

Your email address will not be published. Required fields are marked *