FORTIN 63831 2007 Dodge Caliber Regular Key Remote Starters and Alarm Systems Installation Guide

ADDENDUM – SUGGESTED WIRING CONFIGURATION
REGULAR & THAR-CHR5 INSTALLATION

VEHICLE YEARS
DODGE
Caliber 2007

Contents hide

1 63831 2007 Dodge Caliber Regular Key Remote Starters and Alarm Systems

2 WIRING CONNECTION

3 KEY BYPASS PROGRAMMING PROCEDURE

4 REMOTE STARTER PROGRAMMING PROCEDURE

5 REMOTE STARTER FUNCTIONALITY

6 Documents / Resources

6.1 References

63831 2007 Dodge Caliber Regular Key Remote Starters and Alarm Systems

Vehicle functions supported in this diagram (functional if equipped)

Immobilizer bypass

Lock
Unlock

Arm
Disarm

Tachometer
Door Status

Trunk Status
Hand-Brake Status

Foot-Brake Status
OEM Remote monitoring

R.S. OEM remote Stand Alone compatible

BYPASS FIRMWARE VERSION VERSION LOGICIELLE CONTOURNEMENT 74.[39] MINIMUM
To add the firmware version and the options, use the FLASH LINK UPDATER or FLASH LINK MOBILE tool, sold separately.

Program bypass option:
Program bypass option (If equiped with OEM alarm):
IF THE VEHICLE IS NOT EQUIPPED WITH FUNCTIONAL HOOD PIN:

UNIT OPTION	DESCRIPTION
C1	OEM Remote status (Lock/Unlock) monitoring
D2	Unlock before / Lock after (Disarm OEM alarm)
A11	Hood trigger (Output Status).

Program remote starter option:
Program remote starter option for R.S. OEM REMOTE STAND ALONE:

FUNCTION	MODE	DESCRIPTION
31	4	(+) Parking Light (E1) (+) Accessory (E2)
38	2	Enable Press 3x Lock to remote start with the OEM remote.

Parts required (Not included)

WIRE TO WIRE DIAGRAM
1x 7.5 Amp. fuse
1x Fusible 7.5 Amp.

THARNESS DIAGRAM
THARNESS THAR-CHR5
1x THAR-CHR
1x THAR-CHR5

MANDATORY INSTALL

* HOOD PIN

HOOD STATUS : THE HOOD PIN SWITCH (INCLUDED) MUST BE INSTALLED IF THE VEHICLE CAN BE REMOTE STARTED WITH THE HOOD OPEN, SET FUNCTION A11 TO OFF.

A11

SECURITY STICKER

WARNING
Included
Notice: the installation of safety elements are mandatory. The hood pin and the sticker are essential security elements and must be installed.
THIS MODULE MUST BE INSTALLED BY A QUALIFIED TECHNICIAN. A WRONG CONNECTION CAN CAUSE PERMANENT DAMAGE TO THE VEHICLE.

WIRING CONNECTION

THAR-CHR5

KEY BYPASS PROGRAMMING PROCEDURE

	Press and hold the programming button: Connect the 6-PIN Main harness (White connector). ↪ The Blue, Red, Yellow and Blue & Red LEDs will alternatively illuminate.
	Release the programming button when the LED is BLUE. If the LED is not solid BLUE disconnect the 6-Pin connector (Main-Harness) and go back to step 1.
	Insert the required remaining connectors.
	Turn the key to the Ignition ON/RUN position. ↪ The BLUE LED will flash rapidly.
	Turn the key to the OFF position. ↪ The BLUE LED will flash rapidly.
6. With OEM remote	Press the LOCK button on the vehicles OEM remote.
Without OEM remote	Press and release the programming button on the once.
	↪ The BLUE LED will turn off.

The module is now programmed.
Use the remote of the remote starter or security system to test all of the supported features to ensure proper programming.

REMOTE STARTER PROGRAMMING PROCEDURE

REFER TO THE QUICK INSTALL GUIDE INCLUDED WITH THE MODULE FOR THE REMOTE STARTER PROGRAMMING.

REMOTE STARTER FUNCTIONALITY


All doors must be closed.	Remote start the vehicle.	Unlock the doors with the remote-starter remote or the OEM remote.

Insert and Turn the key to the Ignition ON/RUN position.	Press the brake pedal.	The vehicle can now be put in to gear and driven.

Module label

Notice: Updated Firmware and Installation Guides
Updated ﬁ rmware and installation guides are posted on our web site on a regular basis. We recommend that you update this module to the latest ﬁ rmware and download the latest installation guide(s) prior to the installation of this product.

WARNING
The information on this sheet is provided on an (as is) basis with no representation or warranty of accuracy whatsoever.
It is the sole responsibility of the installer to check and verify any circuit before connecting to it. Only a computer safe logic probe or digital multimeter should be used. FORTIN ELECTRONIC SYSTEMS assumes absolutely no liability or responsibility whatsoever pertaining to the accuracy or currency of the information supplied. The installation in every case is the sole responsibility of the installer performing the work and FORTIN ELECTRONIC SYSTEMS assumes no liability or responsibility whatsoever resulting from any type of installation, whether performed properly, improperly or any other way. Neither the manufacturer or distributor of this module is responsible of damages of any kind indirectly or directly caused by this module, except for the replacement of this module in case of manufacturing defects. This module must be installed by qualiﬁed technician. The information supplied is a guide only. This instruction guide may change without notice. Visit www.fortinbypass.com to get the latest version.

TECH SUPPORT
Tél: 514-255-HELP (4357)
1-877-336-7797

ADDENDUM GUIDE

www.fortinbypass.com
WEB UPDATE

This guide may change without notice. See www.fortin.ca for latest version.
REV.: 20211215
Guide # 63831

Documents / Resources

FORTIN 63831 2007 Dodge Caliber Regular Key Remote Starters and Alarm Systems [pdf] Installation Guide
63831 2007 Dodge Caliber Regular Key Remote Starters and Alarm Systems, 63831, 2007 Dodge Caliber Regular Key Remote Starters and Alarm Systems, Remote Starters and Alarm Systems, Starters and Alarm Systems

References

The domain name off.la is for sale