63781 2005 Chrysler 300 Regular Key Remote Starters and Alarm Systems

Product Information: Product Name: Chrysler
300-300C Bypass Firmware Product Version: 74.[39] Compatibility:
Vehicles Chrysler 300-300C (2005-2007) The Chrysler 300-300C Bypass
Firmware is a software update that allows for certain functions and
options in the vehicle. It is compatible with Chrysler 300-300C
vehicles manufactured between 2005 and 2007. To add the firmware
version and enable options, you will need to use the Flash Link
Updater or Flash Link Mobile tool, which are sold separately. The
bypass firmware version 74.[39] offers features such as the option
to program the bypass unit, enable the remote starter option for
OEM remote stand-alone, and set the hood trigger output status.
Please note that if your vehicle is not equipped with a functional
hood pin, you will need to program the unit option accordingly. For
installation, certain parts are required but not included with the
bypass firmware. These parts include a 7.5 Amp fuse, a 2.4k Ohm
resistor, and the THARNESS THAR-CHR5 wiring harness. Please ensure
that the hood pin switch (included) is installed if your vehicle
can be remote started with the hood open. Set function A11 to “OFF”
in this case. Also, be aware that incorrect wiring connections can
cause permanent damage to your vehicle, so it is recommended to
have a qualified technician install the module. Product
Usage Instructions:
1. To add the firmware version and
enable options, you will need the Flash Link Updater or Flash Link
Mobile tool (sold separately). 2. If your vehicle is not equipped
with a functional hood pin: – Program the unit option A11 to “OFF”
for remote starting without the hood pin. 3. For remote starter
option with OEM remote using 3x Lock: – Program the remote starter
option for R.S. OEM REMOTE STAND ALONE to “Enable”. – Press the
lock button on your OEM remote three times to activate the remote
start feature. 4. For installation, you will need the following
parts (not included): – 1x 7.5 Amp fuse – 1x 2.4k Ohm resistor –
THARNESS THAR-CHR5 wiring harness 5. Wiring connections: – Follow
the provided wiring diagram for proper connections. – Take caution
when disconnecting the harness from the ignition barrel as it can
be fragile and easily break. 6. Cut the loop for automatic
transmission mode if required. 7. Ensure proper connection of CAN
LOW and CAN HIGH wires. 8. Install the vehicle transponder
connector properly. 9. Once installed, test the functionality of
the bypass firmware to ensure proper operation. Note: It is always
recommended to refer to the complete user manual for detailed
instructions and safety precautions before installing or using the
product.

ONE Page 1 / 6

REV.: 20211215

Guide # 63781

REGULAR & THAR-CHR5 INSTALLATION INSTALLATION RÉGULIÈRE ET THAR-CHR5

ADDENDUM – SUGGESTED WIRING CONFIGURATION ADDENDA – SCHÉMA DE BRANCHEMENT SUGGÉRÉ

Vehicle functions supported in this diagram (functional if equipped) | Fonctions du véhicule supportées dans ce diagramme (fonctionnelles si équipé)

Immobilizer bypass T-Harness available (sold separately) Harnais en T disponible (vendu séparément) Lock Unlock Arm Disarm Parking Lights Trunk (open) Tachometer Door Status Trunk Status Hand-Brake Status Foot-Brake Status OEM Remote monitoring R.S. OEM remote Stand Alone compatible

VEHICLE VEHICULES CHRYSLER
300-300C

YEARS ANNÉES

2005-2007

·

·

············ ·

BYPASS FIRMWARE VERSION VERSION LOGICIELLE CONTOURNEMENT
74.[39] MINIMUM

To add the firmware version and the options, use the FLASH LINK UPDATER or FLASH LINK MOBILE tool,
sold separately.
Pour ajouter la version logicielle et les options, utilisez l’outil FLASH LINK UPDATER
ou FLASH LINK MOBILE, vendu séparément.

Program bypass option: Programmez l’option du contournement:
Program bypass option (If equiped with OEM alarm): Programmez l’option du contournement (Si équipé d’une alarme d’origine):
IF THE VEHICLE IS NOT EQUIPPED WITH FUNCTIONAL HOOD PIN:
SI LE VÉHICULE N’EST PAS ÉQUIPÉ D’UN CONTACT DE CAPOT FONCTIONNEL:

UNIT OPTION OPTION UNITE
C1

D2

A11

OFF NON

DESCRIPTION
OEM Remote status (Lock/Unlock) monitoring Suivi des status (Verrouillage/Déverrouillage) de la télécommande d’origine
Unlock before / Lock after (Disarm OEM alarm) Déverrouille avant / Verrouille après (Désarme l’alarme d’origine)
Hood trigger (Output Status).
Contact de capot (état de sortie).

Program remote starter option for R.S. OEM REMOTE STAND ALONE:
Programmez l’option démarreur à distance pour TÉLÉCOMMANDE D’ORIGINE STAND ALONE:

38

Enable

Press 3x Lock to remote start with the OEM remote.

2

Activé Appuyez x3 sur Verrouille de la télécommance d’origine

pour démarrer à distance le véhicule.

Parts required (Not included)

Pièce(s) requise(s) (Non incluse(s))

WIRE TO WIRE DIAGRAM | SCHÉMA DE BRANCHEMENTS FIL À FIL

1x 7.5 Amp. fuse 1x 2.4k Ohm Resistor

1x Fusible 7.5 Amp. 1x Resistance 2.4k Ohm

THARNESS DIAGRAM | SCHÉMA DE BRANCHEMENTS HARNAIS EN T

THARNESS THAR-CHR5

1x THAR-CHR 1x 2.4k Ohm Resistor

1x THAR-CHR5 1x Resistance 2.4k Ohm

PAGE Page 2 Page 3

MANDATORY INSTALL | INSTALLATION OBLIGATOIRE

* HOOD PIN
CONTACT DE CAPOT

HOOD STATUS : THE HOOD PIN SWITCH (INCLUDED) MUST BE INSTALLED IF THE VEHICLE CAN BE

A11

OFF NON

REMOTE STARTED WITH THE HOOD OPEN, SET FUNCTION A11 TO OFF.

STATUT DE CAPOT : LE CONTACT DE CAPOT (INCLUS), DOIT ÊTRE INSTALLÉ SI LE VÉHICULE PEUT DÉMARRER À DISTANCE, LORSQUE LE CAPOT EST OUVERT, PROGRAMMEZ LA FONCTION A11 À NON.

SECURITY STICKER
AUTOCOLLANT DE SÉCURITÉ

WARNING ATTENTION

Included Inclus

Notice: the installation of safety elements are mandatory. The hood pin and the sticker are essential security elements and must be installed. Notice: l’installation des éléments de sécurité est obligatoire. Le contact de capot et l’autocollant de sécurité sont des éléments de sécurité essentiels et doivent absolument être installés.

THIS MODULE MUST BE INSTALLED BY A QUALIFIED TECHNICIAN. A WRONG
CONNECTION CAN CAUSE PERMANENT DAMAGE TO THE VEHICLE.
CE MODULE DOIT ÊTRE INSTALLÉ PAR UN TECHNICIEN QUALIFIÉ, TOUTE
ERREUR DANS LES BRANCHEMENTS PEUT OCCASIONNER DES DOMMAGES
PERMANENTS AU VÉHICULE.

This guide may change without notice. See www.fortin.ca for latest version. Ce guide peut faire l’objet de changement sans préavis. Voir www.fortin.ca pour la récente version.
WIRING CONNECTION | GUIDE DE BRANCHEMENTS

HOOD PIN MANDATORY CONTACT CAPOT OBLIGATOIRE

(+)Ignition

Yellow In AA11

Purple Out AA22

Purple/White Out AA33

Green Out AA44

White Out AA55

Orange Out AA66

Orange/Black Out AA77

Dk.Blue Out AA88

Red/Blue In AA99

Lt.Blue/Black In/Out AA1100

Black In AA1111

(-)Parking Lights

Pink Out AA1122

Yellow/Black Out AA1133

Brown/White In AA1144

(-) Hood pin Pink/Black In AA1155

Purple/Yellow In/Out AA1166

Green/White In/Out AA1177

MUX Green/Red In/Out AA1188

White/Black Out AA1199

Lt.Blue In/Out AA2200

(+)12V
(-)Ground (+)Ignition (+)Starter

White Out EE11 Orange Out EE22
Red In EE33 Black In EE44 Pink In/Out EE55 Yellow Out EE66

CUT LOOP FOR AUTOMATIC TRANSMISSION MODE. COUPEZ LA BOUCLE POUR LE MODE TRANSMISSION AUTOMATIQUE.

C5 Brown C4 Gray/Black C3 Gray C2 Orange/Brown C1 Orange/Green

CAN LOW CAN HIGH

D6 White/Red D5 White/Blue D4 White/Green D3 Yellow/Red D2 Yellow/Blue D1 Yellow/Green

Page 2 / 6

300

2.4K OHM RESISTOR RESISTANCE
A12 (MUX)PARKING LIGHTS White/Brown Blanc/Brun

7.5 Amp Fuse Fusible

E4 GROUND

A18 MUX

Purple/Orange Purple/Brown Mauve/Orange Mauve/Brun

E5 (+)IGNITION Pink/White Rose/Blanc

E6 (+)STARTER
IF PRESENT SI PRÉSENT
Pink/Green Rose/Vert

E3 (+)12V Lt.Blue/Red Bleu Pâle/Rouge

C4 CAN LOW White Blanc

C3 CAN HIGH White/Orange Blanc/Orange

12345 6 7 8 9 10
Driver kick panel Panneau latérale côté conducteur

12345

1

5

Vehicle Ignition connector Back view Connecteur d’ignition du véhicule vue de dos

Key cylinder Barillet de la clé

PIN 8 Empty Pin
Pin vide

8 7654321

Vehicle transponder connector Back view
Connecteur de transpondeur du véhicule vue de dos
CAUTION TAKE CARE WHEN DISCONNECTING THE HARNESS FROM THE IGNITION BARREL. IT IS VERY FRAGILE AND CAN EASILY BREAK.
ATTENTION DÉBRANCHEZ LE CONNECTEUR D’IGNITON AVEC PRÉCAUTION
LE MODULE DE L’IMMOMILISATEUR EST FRAGILE.

This guide may change without notice. See www.fortin.ca for latest version. Ce guide peut faire l’objet de changement sans préavis. Voir www.fortin.ca pour la récente version.
THAR-CHR5 | WIRING CONNECTION | GUIDE DE BRANCHEMENTS

Page 3 / 6

HOOD PIN MANDATORY CONTACT CAPOT OBLIGATOIRE

(+)Ignition

Yellow In AA11

Purple Out AA22

Purple/White Out AA33

Green Out AA44

White Out AA55

Orange Out AA66

Orange/Black Out AA77

Dk.Blue Out AA88

Red/Blue In AA99

Lt.Blue/Black In/Out AA1100

Black In AA1111

(-)Parking Lights

Pink Out AA1122

Yellow/Black Out AA1133

Brown/White In AA1144

(-) Hood pin Pink/Black In AA1155

Purple/Yellow In/Out AA1166

Green/White In/Out AA1177

MUX Green/Red In/Out AA1188

White/Black Out AA1199

Lt.Blue In/Out AA2200

(+)12V
(-)Ground (+)Ignition (+)Starter

White Out EE11 Orange Out EE22
Red In EE33 Black In EE44 Pink In/Out EE55 Yellow Out EE66

CUT LOOP FOR AUTOMATIC TRANSMISSION MODE. COUPEZ LA BOUCLE POUR LE MODE TRANSMISSION AUTOMATIQUE.

NOT CONNECTED NE PAS BRANCHER

C5 Brown C4 Gray/Black C3 Gray C2 Orange/Brown C1 Orange/Green
D6 White/Red D5 White/Blue D4 White/Green D3 Yellow/Red D2 Yellow/Blue D1 Yellow/Green

5 PIN CONN. 6 PIN RED CONN.

ISOLATE NOT CONNECTED ——————–ISOLER NON BRANCHÉ

Purple | mauve

ISOLATE NOT CONNECTED ——————–ISOLER NON BRANCHÉ

Yellow | Jaune

300

2.4K OHM RESISTOR RESISTANCE
A12 (MUX)PARKING LIGHTS White/Brown Blanc/Brun

7.5 Amp Fuse Fusible

T-HARNESS – HARNAIS EN T
THAR-CHR5

E4 GROUND

A18 MUX

Purple/Orange Purple/Brown Mauve/Orange Mauve/Brun

E5 (+)IGNITION Pink/White Rose/Blanc

E6 (+)STARTER
IF PRESENT SI PRÉSENT
Pink/Green Rose/Vert

E3 (+)12V Lt.Blue/Red Bleu Pâle/Rouge

Key cylinder Barillet de la clé

White Blanc

White/Orange Blanc/Orange

12345 6 7 8 9 10
Driver kick panel Panneau latérale côté conducteur

12345

1

5

Vehicle Ignition connector Back view Connecteur d’ignition du véhicule vue de dos

76
Vehicle transponder connector Back view
Connecteur de transpondeur du véhicule vue de dos
CAUTION TAKE CARE WHEN DISCONNECTING THE HARNESS FROM THE IGNITION BARREL. IT IS VERY FRAGILE AND CAN EASILY BREAK.
ATTENTION DÉBRANCHEZ LE CONNECTEUR D’IGNITON AVEC PRÉCAUTION
LE MODULE DE L’IMMOMILISATEUR EST FRAGILE.

I I
I

This guide may change without notice. See www.fortin.ca for latest version. Ce guide peut faire l’objet de changement sans préavis. Voir www.fortin.ca pour la récente version.
KEY BYPASS PROGRAMMING PROCEDURE | PROCÉDURE DE PROGRAMMATION CONTOURNEMENT DE CLÉ

Page 4 / 6

1
x1
HOLD
2
RELEASE

G F A

J H B C D

J

G F A

H B C D

E

E

LED may differ depending on the module casing. L’apparence des DELS peut différer selon le boîtier du module.
ON BLUE BLEU

Press and hold the programming button: Connect the 6-PIN Main harness (White connector).
The Blue, Red, Yellow and
Blue & Red LEDs will alternatively illuminate.

Appuyez et maintenir le bouton de programmation enfoncé: Branchez le harnais Principal à 6-Pins (connecteur Blanc)
Les DELs Bleue, Rouge,
Jaune et Bleue & Rouge s’illumineront alternativement.

Release the programming button when the LED is BLUE.

Relâchez le bouton de programmation quand la DEL est BLEU.

If the LED is not solid BLUE disconnect the 6-Pin connector (Main-Harness) and go back to step 1.

Si le DEL n’est pas BLEU débranchez le connecteur 6 pins (Connecteur principal) et allez au début de l’étape 1.

H B C D

I

J

E

G F A

3

J H B C D

J H B C D

J H B C D

J H B C D

G F A E

I

I

I

Insert the required remaining Insérez les connecteurs requis

connectors.

restants.

G F A E

G F A E

G F A E

4
TURN ON/RUN

LOCK

ACC ON

IGN

START

PUSH

G J
F

I

A

H

B

C E
D

IGNITION OFF IGNITION ON
ON FLASH RAPIDLY

Turn the key to the Ignition ON/RUN position.
The BLUE LED will flash
rapidly.

Tournez la clé à Ignition.
La DEL BLEU clignotera
rapidement.

5
TURN OFF

LOCK

START

OFF
ACC ON PUSH

G J
F

I

A

H

B

C E
D

IGNITION ON

IGNITION OFF

ON FLASH RAPIDLY

Turn the key to the OFF position.
The BLUE LED will flash
rapidly.

Tournez la clé à la position Arrêt (OFF).
La DEL BLEU clignotera
rapidement.

6

With OEM remote Avec Télécommande d’origine
Or | Ou
Without OEM remote Sans Télécommande d’origine

J H B C D

Press the LOCK button on the vehicles OEM remote.

Appuyez sur le bouton Verrouillage de la télécommande d’origine du véhicule.

Press and release the programming Appuyez sur le bouton de

button on the once.

programmation du module.

G F A E

I I

C E
D

B

H

G J
F

A

IGNITION OFF

PRESS
OFF

The BLUE LED will turn off.

La DEL BLEU s’éteint.

The module is now programmed.
Use the remote of the remote starter or security system to test all of the supported features to ensure proper programming.

Le module est programmé.
Testez toutes les fonctions supportées sur le véhicule avec la télécommande du démarreur à distance ou du système de sécurité.

This guide may change without notice. See www.fortin.ca for latest version. Ce guide peut faire l’objet de changement sans préavis. Voir www.fortin.ca pour la récente version.

Page 5 / 6

REMOTE STARTER PROGRAMMING PROCEDURE | PROCÉDURE DE PROGRAMMATION DU DÉMARREUR À DISTANCE

REFER TO THE QUICK INSTALL GUIDE INCLUDED WITH THE MODULE FOR THE REMOTE STARTER PROGRAMMING.
RÉFÉREZ-VOUS AU GUIDE D’INSTALLATION RAPIDE INCLUS AVEC LE MODULE POUR LA PROGRAMMATION DU DÉMARREUR À DISTANCE.

REMOTE STARTER FUNCTIONALITY | FONCTIONNALITÉS DU DÉMARREUR À DISTANCE

Start

UNLOCK

TURN ON/RUN

ON

All doors must be closed. Toutes les
portes doivent être fermées.

Remote start the vehicle.
Démarrez à distance.

Unlock the doors with the remote-starter remote or the OEM remote.
Déverrouillez les portes avec la télécomande du démarreur à distance ou
la télécommande d’origine.

Insert and Turn the key to the Ignition ON/RUN
position. Insérez et tournez la clé à la position “ON/RUN”.

Press the brake pedal.
Appuyez sur la pédale de
frein.

The vehicle can now be put in to gear and driven.
Vous êtes maintenant prêt à
embrayer et prendre la route.

Page 6 / 6

ONE

HARDWARE VERSION FIRMWARE VERSION
Date: xx-xx
INTERFACE MODULE
PATENTS PENDING US: 2007-228827-A1
Made in Canada www.fortinbypass.com
Service No : 000 102 04 2536
Module label | Étiquette sur le module

Notice: Updated Firmware and Installation Guides Updated firmware and installation guides are posted on our web site on a regular basis. We recommend that you update this module to the latest firmware and download the latest installation guide(s) prior to the installation of this product.
Notice: Mise à jour microprogramme et Guides d’installations Des mises à jour du Firmware (microprogramme) et des guides d’installation sont mis en ligne régulièrement. Vérifiez que vous avez bien la dernière version logiciel et le dernier guide d’installation avant l’installation de ce produit.

WARNING The information on this sheet is provided on an (as is) basis with no representation or warranty of accuracy whatsoever. It is the sole responsibility of the installer to check and verify any circuit before connecting to it. Only a computer safe logic probe or digital multimeter should be used. FORTIN ELECTRONIC SYSTEMS assumes absolutely no liability or responsibility whatsoever pertaining to the accuracy or currency of the information supplied. The installation in every case is the sole responsibility of the installer performing the work and FORTIN ELECTRONIC SYSTEMS assumes no liability or responsibility whatsoever resulting from any type of installation, whether performed properly, improperly or any other way. Neither the manufacturer or distributor of this module is responsible of damages of any kind indirectly or directly caused by this module, except for the replacement of this module in case of manufacturing defects. This module must be installed by qualified technician. The information supplied is a guide only. This instruction guide may change without notice. Visit www.fortinbypass.com to get the latest version.
MISE EN GARDE L’information de ce guide est fournie sur la base de représentation (telle quelle) sans aucune garantie de précision et d’exactitude. Il est de la seule responsabilité de l’installateur de vérifier tous les fils et circuits avant d’effectuer les connexions. Seuls une sonde logique ou un multimètre digital doivent être utilisés. FORTIN SYSTÈMES ÉLECTRONIQUES n’assume aucune responsabilité de l’exactitude de l’information fournie. L’installation (dans chaque cas) est la responsabilité de l’installateur effectuant le travail. FORTIN SYSTÈMES ÉLECTRONIQUES n’assume aucune responsabilité suite à l’installation, que celle-ci soit bonne, mauvaise ou de n’importe autre type. Ni le manufacturier, ni le distributeur ne se considèrent responsables des dommages causés ou ayant pu être causés, indirectement ou directement, par ce module, excepté le remplacement de ce module en cas de défectuosité de fabrication. Ce module doit être installé par un technicien qualifié. L’information fournie dans ce guide est une suggestion. Ce guide d’instruction peut faire l’objet de changement sans préavis. Consultez le www.fortinbypass.com pour voir la plus récente version.
Copyright © 2006-2018, FORTIN AUTO RADIO INC ALL RIGHTS RESERVED PATENT PENDING

TECH SUPPORT Tél: 514-255-HELP (4357)
1-877-336-7797
ADDENDUM GUIDE

www.fortinbypass.com
WEB UPDATE | MISE À JOUR INTERNET

Documents / Resources

FORTIN 63781 2005 Chrysler 300 Regular Key Remote Starters and Alarm Systems [pdf] Installation Guide
63781 2005 Chrysler 300 Regular Key Remote Starters and Alarm Systems, 63781, 2005 Chrysler 300 Regular Key Remote Starters and Alarm Systems, Remote Starters and Alarm Systems, Alarm Systems

References

Leave a comment

Your email address will not be published. Required fields are marked *