TP-Link RE315 Covers Up to 1500 Sq.ft Instruction Guide

Up to 25 devices can be connected, and the Internet Wi-Fi coverage is increased up to 1500 square feet. It Supports any WiFi router or access point ¹². By plugging your preferred device into the fast Ethernet connector, you can experience wired speed and dependability across your home. Your wired Internet connection can be quickly converted into a wireless access point using the RE315’s Ethernet connector. It can also serve as a wireless adaptor to link wired devices, such as a smart TV, game console, or Blu-ray player. Any device that supports Wi-Fi is compatible with the RE315 range extender, as are WiFi routers and WiFi access points. 2. Supports TP-Link OneMesh. It Connects to a OneMesh router to build a mesh network for seamless whole-home coverage, such as the Archer A7 or Archer AX21.

POWER ON

Plug the extender into a power outlet next to your router. Wait until its Power LED turns solid on.

SET UP

Get the up-to-date Tether app from the Apple App Store or Google Play, or simply scan the QR code.
Launch the Tether app and log in with your TP-Link ID. If you don’t have an account, create one first.

Tap the + button and select Range Extender.
NOTE: If you cannot find your device, please refer to FAQ > Q1.
Follow app instructions to complete the setup. The LED should turn solid on, indicating successful connection to your router.

NOTE: If the LED does not turn solid on, please refer to FAQ > Q2.

MORE SETUP METHODS

VIA A WEB BROWSER

Connect your computer or smartphone to the extender’s network TP-Link_Extender.

Visit http://tplinkrepeater.net or http://192.168.0.254 in a web browser. Create a password to log in.
Follow web instructions to complete the setup.

VIA THE WPS BUTTON

Press the WPS button on your router.

Within 2 minutes, press the WPS button on the extender for 1 second. The LED should change from blinking to solid on, indicating successful connection.
If the extender connects to a dual-band router, repeat steps 1 and 2 to connect to the other band.

EXTENDED NETWORK NAMES

Router’s network name with _EXT at the end or Same as your OneMesh router (See back for OneMesh details)

PASSWORDS:

Same as your router

RELOCATE

Plug in the extender about halfway between your router and the Wi-Fi dead zone. The location you choose must be within the range of your router.
Wait for about 2 minutes until the LED turns solid white. If it doesn’t, relocate the extender closer to the router to achieve better signal quality.

TIP: For more intuitive location assistance, access extender settings via the Tether app and go to Tools > Location Assistant.

ENJOY!

Connect your devices to the extender wirelessly or via an Ethernet cable, then enjoy the internet. The password of your extended network is the same as your host router.

TIP: You can also set up the extender in Access Point mode to transform your existing wired network to a wireless one. For details, refer to the user guide at https://www.tplink.com/support/download.

ACCESS EXTENDER SETTINGS

After setup, you can access extender settings via any of the methods below. You can reselect host network, change extended network settings and more.

NOTE: If your extender and router use the same network name, Method 1 is recommended.

METHOD 1: VIA THE TETHER APP

Connect your smartphone to the extender‘s or router’s network.
Launch the Tether app, select your extender, and log in.
View or change extender settings as needed.

METHOD 2: VIA A WEB BROWSER

Connect your computer or smartphone to the extender’s network. If you are using a computer, unplug the Ethernet cable if any.
Launch a web browser, enter http://tplinkrepeater.net in the address bar, and log in.

View or change extender settings as needed.

LED EXPLANATION

LED

Status

Indication (For Range Extender Mode)

(Power)

On/Off

Blinking

The extender is on or off.

The system is starting up or firmware upgrade is in progress.

(Signal)

Solid white

Solid red Blinking

Off

The extender is connected to your router’s wireless network and is in a suitable location.

The extender is receiving a weak signal. Try relocating it closer to your router.

WPS connection is in progress.

No wireless connection is established.

2.4GHz

On/Off

The extender is connected or not connected to the 2.4GHz wireless network of your host router.

5GHz

On/Off

The extender is connected or not connected to the 5GHz wireless network of your host router.

ONEMESHTM WITH SEAMLESS ROAMING

TP-Link OneMesh router and extenders work together to form one unified Wi-Fi network. Walk through your home and stay connected with the fastest possible speeds thanks to OneMesh’s seamless coverage.

Unified Wi-Fi Network Router and extenders share the same wireless settings, including network name, password, access control settings and more.

Seamless Roaming Devices automatically switch between your router and extenders as you move through your home for the fastest possible speeds.

Easy Setup and Management Set up a OneMesh network with a push of WPS buttons. Manage all network devices on the Tether app or at your router’s web management page.

To check full list of TP-Link OneMesh devices, scan the QR code, or visit https://www.tp-link.com/One-Mesh/compatibility.

UNIFIED ONEMESH NETWORK

SAFETY INFORMATION

Keep the device away from water, fire, humidity or hot environments.

Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us.
Do not use the device where wireless devices are not allowed.
The socket-outlet shall be installed near the equipment and shall be easily accessible.

Please read and follow the above safety information when operating the device. We cannot guarantee that no accidents or damage will occur due to improper use of the device.

Please use this product with care and operate at your own risk.

TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/53/EU, 2009/125/EC, 2011/65/EU and (EU)2015/863.

The original EU declaration of conformity may be found at https://www.tp-link.com/en/ce.

Frequently Asked Questions

What should I do if the Tether app cannot find my device?

1. Connect your smartphone to the extender’s network TP-Link_Extender.
2. Launch the Tether app, and select your extender.
Tip: If you have connected to the extender’s Wi-Fi but still cannot find your device, turn off your cellular data.
3. Follow app instructions to complete the setup. If you are still having problems, contact our technical support.

What should I do if the

LED doesn’t turn solid on after completing setup via the Tether app or web browser?

· You may have entered incorrect Wi-Fi password for your host router during the configuration. Check the password and try again.
· Make sure the extender is close to your router, preferably within 16 feet, and away from large electrical appliances.
· If you have enabled wireless MAC filtering, wireless access control, or access control list (ACL) on your router, disable them first, then follow any method on the front page to complete the configuration.
· Try setting it up via the WPS button.
· Reset the extender and go through the configuration again.
If you are still having problems, contact our technical support.

How do I reset the extender?

With the extender powered on, use a pin to press the Reset button for 1 second. The extender will reboot.

How can I set up my tp-link RE315 to connect to WiFi?

Simply press the WPS button on your router, and the RE315’s WPS button will connect to the network within two minutes.

Is it acceptable to always have the WiFi extension on?

Your choice as to whether to leave your Wi-Fi range extender on or turn it off while not in use is entirely up to you. It uses very little power, practically none at all. For instance, my TP-Link TL-WA850RE uses only 3 W. (504 Wh weekly, or 26,28 kWh yearly).

How can my TP-Link extender RE315 be reset?

Many routers come with a function called Wi-Fi Protected Setup (WPS). It is intended to simplify the process of joining a computer or other device to a secure wireless network. For Android TVTM models, this is crucial.

Without using WPS, how can I connect my Tp-Link WiFi Extender to my router?

Find the Ethernet cable that connects your router to your PC and unplug the end that is attached to it. Next, connect it straight to the range extender. By doing this, an Ethernet connection between the range extender and the PC will be established.

Can the TP Link extender be turned off?

Select Extended Network under Wireless in Settings. By default, the wireless radio is turned on. Simply uncheck the Enable item to turn off a band’s wireless functionality.

A Wi-Fi extension might get too hot.

It will produce heat because it is an electrical appliance and a network device, so please set it somewhere that is open and breezy. In the interim, try plugging it into a different socket and make sure the firmware is current.

What location is best for a Wi-Fi extender?

The extender should be placed halfway between your wireless router and your PC, but it MUST be inside the wireless router’s coverage area. Reposition the Extender closer to the device while still within the router’s wireless range if you must utilize a different location.

What do the various lights on a TP-Link extender signify?

TP-LINK powerline adapters typically feature three LED lights: The first one denotes electricity, the second, a powerline connection, and the third, an Ethernet connection.

What occurs when I press my router’s WPS button?

To enable the automatic discovery of new devices, press the WPS button on your router. Next, choose the network you want to connect to on your device. Without requiring the network password, the gadget instantly joins the wireless network.

Does WPS automatically shut off?

WPS is available in two flavors. Both a PIN and a button version are available. Because WPS can only be activated by pressing the router’s WPS button, the button version is significantly safer. A few minutes later, it turns itself off automatically.