D-Link-logo

D-Link DGS-1510-28P Gigabit Ethernet SmartPro Switch

D-Link-DGS-1510-28P-Gigabit-Ethernet-SmartPro-Switch-Product-Img

Introduction

The D-Link DGS-1510 Series is the latest generation of Smart Managed switches with 10G capability, available with 16, 24, or 48 10/100/1000 Mbps ports plus additional fiber ports for physical stacking or uplinks. The PoE-capable DGS-1510-28P switches provide additional flexibility for businesses looking to power IP phones, wireless access points, or IP cameras using existing network infrastructure. The combination of high bandwidth connections and PoE support make the DGS-1510 Series ideal for Small- Medium Enterprise (SME) and Small-Medium Business (SMB) environments.

Features

Advanced Features

  • Physical stacking of up to 6 devices via two 10G ports
  • Ethernet Ring Protection Switching (ERPS)
  • Static Routing
  • Auto Surveillance VLAN
  • Auto Voice VLAN
  • Loopback Detection
  • LLDP/LLDP-MED

Security Features

  • Access Control List (ACL)
  • D-Link Safeguard Engine
  • BPDU Attack Protection
  • ARP Spoofing Prevention
  • IP-MAC-Port Binding
  • DoS Attack Prevention
  • Clientless MAC/Web Access Control

Intuitive Management

  • Multi-language web-based user interface
  • Built-in SNMP MIB for remote network management systems
  • Comprehensive CLI support
  • Manageability for both IPv4/IPv6 environments
  • Dual image support
  • D-Link Network Assistant (DNA) utility for easy installation
  • Console interface for out-of-band management

Green Technology

  • IEEE 802.3az Energy Efficient Ethernet (EEE)
  • D-Link Green 3.0 power-saving features

Product Highlight

10G SFP+ Stacking/Uplink Ports
The last two SFP+ ports of the DGS-1510 Series switches allow users to create a physical stack of up to 6 units in a fault-tolerant ring or linear topology using Direct Attach Cables (DACs) or any compatible SFP+ transceiver1. This creates a total of 288 Gigabit ports, ensuring high bandwidth while staying cost-efficient. Meanwhile, the remaining uplink ports can be used for other functions, such as connecting to a larger network. Users can also easily configure and manage any of the DGS-1510 Series Smart Managed switches in a single stack. With 20 Gbps full-duplex capabilities, the DGS-1510 Series offers 10G connectivity to core networks and servers while still maintaining fast data transfer rates.

Layer 3 Traffic Management
The DGS-1510 Series provides static routing, allowing you to segment your network into workgroups that communicate between VLANs and increase application performance. With these capabilities, you can reduce the load on your core devices, allowing you to create a scalable and efficient network.

Extensive Layer 2 Features
The DGS-1510 Series switches are equipped with a complete line-up of Layer 2 features, including IGMP Snooping, Port Mirroring, Spanning Tree, and Link Layer Discovery Protocol (LLDP). The IEEE 802.3x Flow Control function allows servers to directly connect to the switch for fast, reliable data transfer. Network maintenance features include Loopback Detection and Cable Diagnostics. Loopback Detection automatically detects and shuts down loops created by a specific port or VLAN. The Cable Diagnostics feature, designed primarily for administrators and customer service representatives, can determine cable quality and can quickly discover sections of cabling that need to be replaced.

Traffic Classification & QoS
The DGS-1510 Series supports Auto Surveillance VLAN (ASV) and Auto Voice VLAN, which are best suited for VoIP and video surveillance deployments. Auto Surveillance VLAN is a new, industry-leading technology built into D-Link Smart switches. This technology consolidates data and surveillance video transmissions through a single DGS-1510 Series Smart Managed switch, saving businesses the costs of maintaining expensive dedicated hardware and infrastructure. ASV also ensures the quality of real-time video for monitoring and control without compromising the transmission of conventional network data by giving ASV traffic priority over other packets.

Keep Your Network Secure
D-Link’s innovative Safeguard Engine protects the DGS-1510 Series against traffic flooding caused by malicious attacks. The DGS-1510 Series supports both MAC and web-based access control. This gives network administrators multiple authentication options, reducing deployment times and removing the need for client software. The DGS-1510 Series supports IEEE 802.1X port-based authentication, allowing network users to be authenticated through external RADIUS servers. The Address Resolution Protocol (ARP) Spoofing Prevention feature helps to prevent attacks that may allow an intruder to intercept users’ traffic while the DHCP Server Screening feature screens rogue DHCP server packets from user ports to prevent unauthorized IP assignment.

IPv6 Ready
The DGS-1510 Series is IPv6 ready and supports various IPv6 functions such as MLD Snooping, IPv6 security features, and IPv6 Quality of Service (QoS), ensuring seamless integration with next-generation networks. The DGS-1510 Series also supports IPv4/v6 dual stack functionality, which allows the switches to act as a bridge between IPv4 and IPv6 networks.

Versatile Management
The DGS-1510 Series supports virtual stacking via D-Link’s Single IP Management (SIM), allowing up to 32 devices to be managed through a single IP address. This simplifies the management of small workgroups or wiring closets while significantly reducing the number of IP addresses needed to manage your network. The DGS-1510 Series provides the D-Link Network Assistant (DNA) utility and a web-based management interface that enables administrators to easily set up and manage their networks, greatly reducing switch deployment time. The DGS-1510 Series also features an extensive Command Line Interface (CLI) and SNMP support, allowing centralized management of a large number of devices. Out-of-band management of the switches is also available via a designated console port. This provides access to devices in the event that there is a loss of connectivity or that the switch is overloaded with bulk or malicious traffic.

Energy Efficient
All of the DGS-1510 Series switches are capable of conserving power without sacrificing operational performance or functionality thanks to D-Link Green 3.0 technology. Using the IEEE 802.3az Energy Efficient Ethernet (EEE) standard, the network will automatically decrease power usage when traffic is low. For environments that do not fully support this standard, these switches offer advanced power-saving settings including port shut-off, LED shut-off, and system hibernation based on custom profiles. These profiles can also be applied to the PoE switches so that there is no unnecessary power consumption during off-hours.

Specifications

Technical Specifications
General      
Model Number DGS-1510-28P DGS-1510-28XMP DGS-1510-52XMP
Hardware Version A1
Port Standards & Functions IEEE 802.3 10BASE-T Ethernet, IEEE 802.3u 100BASE-TX Fast Ethernet, IEEE 802.3ab 1000BASE-T Gigabit

Ethernet, 802.3ae 10 GbE, IEEE 802.3x Flow Control for Full-Duplex Mode, Auto-negotiation

Number of Ports 24 x 10/100/1000 Mbps PoE capable, 2 x Gigabit SFP, 2 x 10G SFP+ 24 x 10/100/1000 Mbps PoE capable, 4 x 10G SFP+ 48 x 10/100/1000 Mbps PoE capable, 4 x 10G SFP+
Network Cables UTP Cat. 5, Cat. 5e (100 m max.); EIA/TIA-568 100-ohm STP (100 m max.)
Full/Half Duplex Full/half-duplex for 10/100 Mbps and full-duplex for 1000 Mbps speed
Media Interface Exchange Auto or configurable MDI/MDIX
Performance  
Switching Capacity 92 Gbps 128 Gbps 176Gbps
Transmission Method Store-and-forward
MAC Address Table Up to 16,384 entries per device
MAC Address Update Up to 512 static MAC entries, Enable/disable auto-learning of MAC addresses
Maximum 64 bytes Packet Forwarding Rate  

68.45 Mpps

 

95.24 Mpps

 

130.95Mpps

Packet Buffer Memory 1.5 MB per device 3MB per device
MTBF 275,428 hours 274,796 hours 303,027 Hours
PoE  
PoE Standard IEEE 802.3af, 802.3at
PoE Capable Ports Ports 1 to 24: Up to 30 W Ports 1 to 48: Up to 30 W
 

PoE Power Budget

 

Max.  193 W

 

Max.  370 W

Max. 370 W (740 W with DPS-700

RPS redundant power supply)

Physical & Environment  
AC Input 100 to 240 VAC 50/60 Hz internal universal power supply
Maximum Power Consumption 238.7 W (PoE on), 29 W (PoE off) 436.3 W (PoE on), 38.4 W (PoE off) 486.9 W (PoE on), 58.8W (PoE off)
Standby Power Consumption 21 W 28.3 W 40.1 W
Smart Fan Quantity 2 x smart fans 4 x smart fans
Acoustics 46.4 dB(A) 56.9 dB(A) 55.4 dB(A)
Heat Dissipation 813.967 BTU/hr 1487.78 BTU/hr 1660.329 BTU/hr
Operation Temperature -5 to 50 ˚C (23 to 122 ˚F)
Storage Temperature -20 to 70˚C (-4 to 158 ˚F)
Operation Humidity 0% to 95% non-condensing
Storage Humidity 0% to 95% non-condensing
Dimensions 440 x 210 x 44 mm 440 x 308 x 44 mm 440 x 308 x 44 mm
Weight 2.54 kg 4.25 kg 5.41 kg
 

Diagnostic LEDs

Power/Stacking ID/Fan Error/PoE Push Button (per device), Link/Activity/Speed/PoE Mode (per 10/100/1000 Mbps port), Link/Activity/Speed (per SFP port), Link/Activity/Speed (per 10G SFP+ port)
Certifications CE, FCC, C-Tick, VCCI, BSMI, CCC, IPv6 Ready Logo Phase 2 CE, FCC, C-Tick, VCCI, BSMI, CCC
Safety cUL, CB
Software Features
Stackability •    Virtual Stacking Support

•    D-Link Single IP Management

•    Up to 32 devices per virtual stack

•    Up to 20G stacking bandwidth

•    Physical Stacking

•    Supports Duplex Chain/Ring topology

•    Up to 40G stacking bandwidth full duplex

•    Up to 6 units per stack

L2 Features •    MAC Address Table: Up to 16,384

•    Flow Control

•   802.3x Flow Control

•   HOL Blocking Prevention

•    Jumbo Frame up to 9,216 Bytes

•    IGMP Snooping

•   IGMP v1/v2 Snooping

•   IGMP v3 awareness

•   Supports 512 IGMP groups

•   Supports 128 static multicast addresses

•   IGMP per VLAN

•   Supports IGMP Snooping Querier

•   Host-based IGMP Snooping Fast Leave

•    MLD Snooping

•   Supports MLD v1/v2

•   Supports 512 groups

•   Supports 128 Static Multicast Addresses

•   Per VLAN MLD Snooping

•   Host-based MLD Fast Leave

•   MLD Snooping Querier

•    Spanning Tree Protocol

•    802.1D STP

•    802.1w RSTP

•    802.1s MSTP

•    Loopback Detection v4.07

•    802.3ad Link Aggregation

•    Max. 32 groups per device/8 ports per group

•    Port Mirroring

•    Support 4 mirroring groups

•    One-to-One, Many-to-One

•    Supports Mirroring for Tx/Rx/Both

•    Multicast Filtering

•    Forwards all unregistered groups

•    Filters all unregistered groups

•   Ethernet Ring Protection Switching (ERPS)

VLAN •    802.1Q Tagged VLAN

•    4K VLAN Groups

•    Configurable VID: 0~4094

•    GVRP

•    VLAN Wizard

•    Asymmetric VLAN

•    Auto Voice VLAN

•    Auto Surveillance VLAN 2.1

•    MAC-based VLAN

•    Protocol-based VLAN

Quality of Service (QoS) •    CoS based on

•   802.1p priority

•   VLAN

•   MAC address

•   Ether type

•   IP address

•   DSCP

•   Protocol type

•   TCP/UDP port number

•   DSCP of IPv6 Traffic Class

•   IPv6 flow label

•    802.1p Quality of Service

•    Queue Handling

•    Strict Priority Queue (SPQ)

•    Weighted Round Robin (WRR)

•    Deficit Round Robin (DRR)

•    SPQ + WRR

•    8 queues per port

•    Bandwidth Control

•    Port-based (Ingress/Egress, min. granularity for 10/100/1000 BASE-T ports is 64 Kb/s)

L3 Features •    ARP

•   256 Static ARP

•   Supports Gratuitous ARP

•    IPv6 Neighbour Discovery (ND)

•    16 IP interfaces

•   Default Routing

•   Static Routing

•    64 IPv4 Static Route Entries

•    32 IPv6 Static Route Entries

•   UDP helper

Access Control List (ACL) •    ACL based on

•   802.1p priority

•   VLAN

•   MAC address

•   Ether type

•   IP address

•   DSCP

•   Protocol type

•   TCP/UDP port number

•   DSCP of IPv6 Traffic Class

•   IPv6 flow label

•   ACL Actions

•    Permit

•    Deny

•   Max. 256 access list

•   Max. 768 rules

•   Single or multiple ports (each rule)

•   Time-based ACL

•   ACL Statistics

Security •    Port Security

•   Supports up to 128 MAC addresses per port

•    Broadcast/Multicast/Unicast Storm Control

•    Dynamic ARP Inspection

•    D-Link Safeguard Engine

•    DHCP Server Screening

•    ARP Spoofing Prevention

•   Max. 64 entries

•    SSH

•   Supports v2

•   Supports IPv4/IPv6

•    BPDU Attack Protection

•    DoS Attack Prevention

•   SSL

•    Supports v1/v2/v3

•    Supports IPv4/IPv6

•    Traffic Segmentation

•   IP-MAC-Port Binding

•    DHCP snooping

•    IP Source Guard

•    Dynamic ARP Inspection

•    IPv6 DHCP Guard

•    IPv6 RA Guard

•    IPv6 Snooping

•    IPv6 Source Guard

•    IPv6 ND Inspection

AAA •    Compound Authentication

•    802.1X Port and MAC-based Authentication

•   Supports RADIUS and Local Server

•   Supports EAP, OTP, TLS, TTLS, PEAP

•    Web-based Access Control (WAC)

•   Port-based Access Control

•   Host-based Access Control

•   Dynamic VLAN Assignment

•    Guest VLAN

•    RADIUS and TACACS+ authentication for switch access

•    RADIUS and TACACS+ accounting

•   MAC-based Access Control (MAC)

•    Port-based Access Control

•    Host-based Access Control

•    Dynamic VLAN Assignment

•   Japan Web-based Access Control (JWAC)

•    Port-based Access Control

•    Host-based Access Control

•    Dynamic VLAN Assignment

Software Features
OAM •    Cable Diagnostics                                                                    • Factory Reset

•    sFlow

Management •    Command Line Interface (CLI)                                                   • Surveillance mode

•    Telnet Server                                                                          • DHCP Client

•    TFTP Client                                                                             • D-Link Network Assistant support

•    IPv6 Neighbor Discovery                                                          • SNTP

•    Configurable MDI/MDIX                                                           • ICMPv6

•    SNMP                                                                                     • IPv4/v6 Dual Stack

•    Supports v1, v2c, v3                                                             • DHCP Auto Configuration

•    SNMP Trap                                                                              • RMON v1

•    System Log                                                                             • LLDP, LLDP-MED

•   Max. 10,000 log entries                                                         • DHCP relay

•    Debug command                                                                    • Web-based GUI

•    Multiple images                                                                      • NTP

•    DHCP Server                                                                           • Telnet client (supports CLI only)

•    DHCP Client                                                                           • PD-Alive (PoE models only)

D-Link Green 3.0 Technology •    Power Saving by:                                                                     • System Hibernation mode

•   Link Status                                                                           • Time-based PoE (PoE models only)

•   LED or Port Shutoff

Optional SFP Transceivers
DEM-310GT 1000BASE-LX, single-mode, 10 km
DEM-311GT 1000BASE-SX, multi-mode, 550 m
DEM-312GT2 1000BASE-SX, multi-mode, 2 km
Optional SFP+ Transceivers
DEM-431XT 10GBASE-SR SFP+ Transceiver (without DDM), 80m: OM1 & OM2 MMF,300m: OM3 MMF
DEM-432XT 10GBASE-LR SFP+ Transceiver (without DDM), 10km
Optional SFP+ Direct Attach Stacking Cables
DEM-CB100S 10-GbE SFP+ 1 m Direct Attach Cable
DEM-CB300S 10-GbE SFP+ 3 m Direct Attach Cable
Optional Redundant Power Supplies
DPS-700 AC Redundant Power Supply for DGS-1510-52XMP

Support

QR Code Scan

D-Link-DGS-1510-28P-Gigabit-Ethernet-SmartPro-Switch-Img-1

For more information: www.dlink.com
D-Link (Europe) Ltd., First Floor, Artemis Building, Odyssey Business Park, West End Road, South Ruislip HA4 6QE, United Kingdom. Specifications are subject to change without notice. D-Link is a registered trademark of D-Link Corporation and its overseas subsidiaries. All other trademarks belong to their respective owners. ©2022 D-Link Corporation. All rights reserved. E&OE.

FAQ’s

What is the purpose of the DGS-1510-28P Gigabit Ethernet SmartPro Switch?

Small to medium-sized enterprises can improve network management, security, and performance with the DGS-1510-28P.

How many PoE ports does the switch have?

It has 24 PoE ports with a maximum 193W budget overall.

What is the switching capacity of the switch?

The switch has a 56 Gbps switching capacity.

Can I manage the switch remotely?

Yes, the switch supports a variety of management methods, including D-Link Network Assistant, SNMP, Telnet, SSH, and web-based GUI.

What Layer support does the switch offer?

Layer 2 and Layer 3 Lite features on the switch enable complex network topologies.

Is IPv6 supported?

Yes, the switch supports IPv6 functions such as Static IPv6 Routing, DHCPv6, and IPv6 Neighbour Discovery.

How does the switch enhance security?

To improve network security, it provides capabilities including ACLs, IP-MAC-Port Binding, DHCP Snooping, and 802.1X Port-based Authentication.

Can I create VLANs with this switch?

The switch does indeed offer VLAN features including MAC-based VLANs and 802.1Q VLANs.

Is there support for Quality of Service (QoS)?

Yes, the switch offers QoS features including Bandwidth Control, DSCP-based QoS, and 802.1p Priority Queues.

Does the switch support link aggregation?

It does support link aggregation technologies like Static Trunking and LACP.

What redundancy features are available?

For network redundancy, the switch supports Spanning Tree Protocols (STP, RSTP, MSTP).

Can I stack multiple switches together?

The use of an optional stacking kit is necessary, but physical stacking is possible via HDMI ports.

References: D-Link DGS-1510-28P Gigabit Ethernet SmartPro Switch – Device.report

References

Leave a comment

Your email address will not be published. Required fields are marked *