Black + Decker -logo

Black + Decker F976 Smart Steam Quickpress Iron

Black + Decker-F976-Smart-Steam-Quickpress-Iron-product

Please Read and Save this Use and Care Book.

IMPORTANT SAFEGUARDS

When using your iron, basic safety precautions should always be followed, including the following:

  • Read all instructions before using.
  • Use iron only for its intended use.
  • To protect against the risk of electric shock, do not immerse the iron in water or other liquids.
  • The iron should always be turned to OFF (0) before plugging or unplugging from the outlet. Never yank the cord to disconnect from the outlet; instead, grasp the plug and pull to disconnect.
  • Do not allow the cord to touch hot surfaces. Let the iron cool completely before putting it away. Loop cord loosely around iron when storing.
    Always disconnect the iron from the electrical outlet when filling with water or emptying, and when not in use.
  • Do not operate iron with a damaged cord, or if the iron has been dropped or damaged. To avoid the risk of electric shock, do not disassemble the iron; take it to a qualified service person for examination and repair, or call the appropriate toll-free number on the cover of this manual. Incorrect reassembly can cause a risk of electric shock when the iron is used.
  • close supervision is necessary for any appliance being used by or near children. Do not leave the iron unattended while connected or on an ironing board.
  • Burns can occur from touching hot metal parts, hot water, or steam. Use caution when you turn a steam iron upside down or use the surge of steam – there may be hot water in the reservoir. Avoid rapid movement of iron to minimize hot water spillage.

SPECIAL INSTRUCTIONS

  • To avoid a circuit overload, do not operate another high-wattage appliance on the same circuit.
  • If an extension cord is absolutely necessary, a 15-ampere cord should be used. Cords rated for less amperage may overheat. Care should be taken to arrange the cord so that it cannot be pulled or tripped over.

SAVE THESE INSTRUCTIONS.

This product is for household use only.

POLARIZED PLUG

This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit into a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to modify the plug in any way.

TAMPER-RESISTANT SCREW

Warning: This appliance is equipped with a tamper-resistant screw to prevent removal of the outer cover. To reduce the risk of fire or electric shock, do not attempt to remove the outer cover. There are no user-friendly parts inside. Repair should be done only by authorized service personnel.

ELECTRICAL CORD

  1. A short power-supply cord (or detachable power-supply cord) is to be provided to reduce the risk resulting from becoming entangled in or tripping over a longer cord.
  2. Longer detachable power-supply cords or extension cords are available and may be used if care is exercised in their use.
  3. If a long detachable power supply cord or extension cord is used,
    • The marked electrical rating of the detachable power supply cord or extension cord should be at least as great as the electrical rating of the appliance,
    • If the appliance is of the grounded type, the extension cord should be a grounding-type 3-wire cord, and
    • The longer cord should be arranged so that it will not drape over the countertop or tabletop where it can be pulled on by children or tripped over.
      Note: If the power supply cord is damaged, it should be replaced by qualified personnel; in Latin America, by an authorized service center.

The product may vary slightly from what is illustrated. 

Black + Decker-F976-Smart-Steam-Quickpress-Iron-fig.1

  1. Spray nozzle
  2. Water-fill opening
  3. Fabric select dial
  4. Spray button
  5. Steam button
  6. 360° pivoting cord
  7. Heel rest
  8. Fabric Guide
  9. Water tank
  10. Soleplate

How to Use

This appliance is for household use only.
GETTING STARTED

  • Remove any labels, stickers, or tags attached to the body or soleplate of the iron.
  • Please go to www.prodprotect.com/applica to register your warranty.

Note: Use ordinary tap water for ironing. Do not use water processed through a home softening system.

Important: For optimum performance, let the iron stand for 90 seconds before beginning to iron.

FILLING WATER TANK

Black + Decker-F976-Smart-Steam-Quickpress-Iron-fig.2

  1. Tilt the iron and using a clean measuring cup, pour water into the water-fill opening (A) until the water reaches the MAX mark on the water tank. Refill as needed.
  2. Plug in the iron.

Tip: If unsure of a garment’s fiber, test a small area (on an inside seam or hem) before ironing.

Note: If you need to add water while ironing, unplug the iron and follow the above steps.

WAY AUTOMATIC SHUTOFFBlack + Decker-F976-Smart-Steam-Quickpress-Iron-fig.3
The automatic shutoff feature in your iron works as follows:

  • Once the iron reaches the appropriate temperature, it will turn off after 30 seconds of inactivity if left on its soleplate or tipped over on its side. If left vertically on its heel rest, it will shut off after 8 minutes (B).
  • As soon as you pick up the iron, it will start heating again. Wait for the iron to reheat completely before resuming operation.

SMART STEAM® TECHNOLOGY
The Smart Steam® system automatically produces steam when you turn the fabric select dial between settings 4 and 6. The higher the setting, the more powerful the steam.

SURGE OF STEAM

Horizontal

Tip: Use to remove stubborn creases.Black + Decker-F976-Smart-Steam-Quickpress-Iron-fig.4

  1. With the water tank filled to the MAX mark, set the fabric select dial to the appropriate setting (between 4 and 6) for your fabric (C). See the fabric guide under the heel rest and read the garment’s label to help you determine the fabric type.
  2. Be sure there is water in the reservoir. Steam is automatically turned off between settings 0 and 3.
  3. For best performance, press the steamBlack + Decker-F976-Smart-Steam-Quickpress-Iron-fig.5 button at 5-second intervals.
  4. When finished ironing, turn the fabric select dial to 0 and unplug the iron.

Important: Always stand the iron on its heel rest when powered on but not in use.

Vertical

Tip: Use for removing wrinkles from hanging clothes and drapes.

  1. Be sure the water tank is filled to the MAX mark.
  2. Hang the garment to be steamed on a clothes hanger. (Curtains or drapes can be steamed once they are hung.)Black + Decker-F976-Smart-Steam-Quickpress-Iron-fig.6
  3. Set the fabric select dial to the appropriate setting (between 4 and 6) for your fabric.
  4. Hold the iron close to, but not touching, the fabric.
  5. Pull the fabric tight in your free hand and pump the steam Black + Decker-F976-Smart-Steam-Quickpress-Iron-fig.5button as you move the iron over the fabric (D).

USING SPRAY
Tip: Use to dampen tough wrinkles at any setting (E).

  1. Be sure the iron is filled with water.
  2. On first use, pump the sprayBlack + Decker-F976-Smart-Steam-Quickpress-Iron-fig.8 button several timesBlack + Decker-F976-Smart-Steam-Quickpress-Iron-fig.7

ANTI DRIP SYSTEMBlack + Decker-F976-Smart-Steam-Quickpress-Iron-fig.9

The anti-drip system prevents water spotting at low temperatures.

DRY IRONING

  1. Turn the fabric select dial to setting 1, 2, or 3 (DRY) to iron without steam (F). The Smart Steam® system will automatically turn the steam off.
  2. To dry iron at higher settings, empty the water from the reservoir to prevent steaming.Black + Decker-F976-Smart-Steam-Quickpress-Iron-fig.10

EMPTYING WATER TANK (OPTIONAL)

Note: It is not necessary to empty the water after each use.

  1. Unplug the iron and let it cool.
  2. To empty the water, hold the iron over a sink with the tip pointing down. Water will empty out the water-fill opening (G).Black + Decker-F976-Smart-Steam-Quickpress-Iron-fig.11

Care and Cleaning

This product contains no user-serviceable parts. Refer service to qualified service personnel.

CLEANING

  1. Make sure the iron is unplugged and has cooled completely. Wipe the soleplate and outer surfaces with a soft cloth dampened with water and mild household detergent. Never use abrasives, heavy-duty cleansers, vinegar or scouring pads that may scratch or discolor the iron.
  2. After cleaning, steam iron over an old cloth to remove any residue from the steam vents.

STORING

  1. Unplug the iron and let it cool completely.
  2. Check that the fabric select dial is set to 0.
  3. Store iron on its heel rest. Storing iron on its soleplate can cause leaks or damage.

NEED HELP?

For service, repair, or any questions regarding your appliance, call the appropriate 800 number on the cover of this book. Please DO NOT return the product to the place of purchase. Also, please DO NOT mail the product back to the manufacturer, nor bring it to a service center.
You may also want to consult the website listed on the cover of this manual.

Two-Year Limited Warranty

(Applies only in the United States and Canada)

  • What does it cover?
    Any defect in material or workmanship provided; however, Applica’s liability will not exceed the purchase price of the product.
  • For how long?
    Two years after the date of purchase.
  • What will we do to help you?
    Provide you with a reasonably similar replacement product that is either new or factory refurbished.
  • How do you get service?
    • Save your receipt as proof of date of sale.
    • Visit the online service website at www.prodprotect.com/applica, or call toll-free 1-800-231-9786, for general warranty service.
    • If you need parts or accessories, please call 1-800-738-0245.
  • What does your warranty not cover?
    • Damage from commercial use
    • Damage from misuse, abuse, or neglect
    • Products that have been modified in any way
    • Products used or serviced outside the country of purchase
    • Glass parts and other accessory items that are packed with the unit
    • Shipping and handling costs associated with the replacement of the unit
    • Consequential or incidental damages (Please note, however, that some states do not allow the exclusion or limitation of consequential or incidental damages, so this limitation may not apply to you.)
  • How does state law relate to this warranty?
  • This warranty gives you specific legal rights. You may also have other rights that vary from state to state or province to province.

FAQs

Is the Black + Decker F976 iron suitable for all fabric types?

Yes, the Black + Decker F976 iron is designed to be suitable for a wide range of fabric types, including cotton, linen, silk, wool, and more.

Does this iron have adjustable temperature settings?

Yes, it features adjustable temperature settings, allowing you to choose the right heat level for different fabrics.

What is the wattage of the Black + Decker F976 iron?

The iron has a wattage rating of 1200 watts, providing efficient and quick heating.

Is there a steam function on this iron?

Yes, this iron has a steam function that can be used to remove wrinkles more effectively.

Can I use tap water for the steam function?

It is recommended to use distilled or demineralized water to prevent mineral buildup in the iron. However, tap water can be used in a pinch.

Does it have an anti-drip feature to prevent water leakage?

Yes, the Black + Decker F976 iron is equipped with an anti-drip feature to prevent water from leaking out during ironing.

What type of soleplate does it have?

This iron features a nonstick soleplate that glides smoothly over fabrics, reducing the risk of sticking or scorching.

Is there an auto-shutoff feature for safety?

Yes, the iron has an auto-shutoff feature that turns it off automatically if left idle for a certain period, enhancing safety.

Can I use it for vertical steaming?

Yes, the iron supports vertical steaming, making it suitable for refreshing hanging garments or curtains.

How do I clean the water tank of the iron?

To clean the water tank, simply rinse it with water and empty it after each use to prevent mineral buildup. You can also use a mixture of water and vinegar for descaling.

What is the length of the power cord?

The power cord of the Black + Decker F976 iron is approximately 8 feet long, providing flexibility during use.

Can I use this iron for ironing delicate fabrics like silk?

Yes, you can use this iron for delicate fabrics like silk, thanks to its adjustable temperature settings and steam function.

Is it easy to refill the water tank?

Yes, the water tank is easy to refill, and it has a clear window to help you monitor the water level.

Does the iron come with a warranty?

Yes, the Black + Decker F976 iron typically comes with a limited warranty. Be sure to check the warranty details provided with your purchase.

Is the iron suitable for travel?

While it's not specifically designed as a travel iron, its compact size and versatility make it a convenient choice for travel if you need to iron garments on the go.

Can I use starch with this iron?

Yes, you can use starch with this iron if you prefer crisp, stiff results. However, be sure to follow the instructions on the starch product you use.

Download This PDF Link: Black + Decker F976 Smart Steam Quickpress Iron User Manual

References

Leave a comment

Your email address will not be published. Required fields are marked *