BRExhaust-LOGO

BRExhaust 2008-2013 Infiniti G35 Direct Fit Exhaust Kit

BRExhaust-2008-2013-Infiniti-G35-Direct-Fit-Exhaust-Kit-PRO

Product Information

The product is an exhaust system, identified by part number 106-0193. It is manufactured by BRExhaust and is designed for installation in vehicles. The exhaust system comes with several components, as listed in the bill of materials:

  • 1 x Item 167628
  • 2 x Item 167957
  • 3 x Item 167501
  • 4 x Item 167955
  • 5 x Item 167956

It is important to note that nuts and bolts are not included with the product.

BILL OF MATERIALS

BRExhaust-2008-2013-Infiniti-G35-Direct-Fit-Exhaust-Kit-1

  1. 167628
  2. 167957
  3. 167501
  4. 167955
  5. 167956

WARNING: When working on, under, or around any vehicle exercise caution. Please allow the vehicle’s exhaust system to cool before removal, as exhaust temperatures may cause severe burns. If working without a lift, always consult vehicle manual for correct lifting specifications. Always wear safety glasses and ensure a safe work area. Serious injury or death could occur if safety measures are not followed.

INSTALLATION INSTRUCTIONS

  • STEP 1: (Carefully read all instructions before installation) Disconnect the vehicle’s battery before removal of the OEM exhaust system. This will prevent electrical accidents and will reset the computer if it applies to the vehicle. Remove existing exhaust system from the vehicle. Only remove parts that will be replaced. Clean existing flange with a wire brush to ensure proper sealing.
  • STEP 2: Attach item 2 to existing exhaust with item 1 (nuts and bolts not included)
  • STEP 3: Attach item 4 to existing isolators and item 2 with item 3
  • STEP 4: Attach item 5 to existing isolators and item 2 with item 3
  • STEP 5: Connect item 2 slip fit joints with clamps provided
  • STEP 6: Ensure new exhaust is not contacting any portion of the underbody of the vehicle or drivetrain.
  • STEP 7: Tighten all clamps starting from rear of the vehicle. (DO NOT EXCEED 30FT-LB WHEN TIGHTENING CLAMP AND CHECK ALL CLAMPS AFTER 50 MILES. RETIGHTEN IF NECESSARY)

BRExhaust recommends professional installation for all products.

Technical Support: 1-800-631-7271
BRExhaust — 1901 Corporate Ctr, Oceanside, CA 92056
www.brexhaust.com

Documents / Resources

BRExhaust 2008-2013 Infiniti G35 Direct Fit Exhaust Kit [pdf] Instruction Manual
2008-2013 Infiniti G35 Direct Fit Exhaust Kit, 2008-2013 Infiniti G35, Direct Fit Exhaust Kit, Fit Exhaust Kit, Exhaust Kit

References

Leave a comment

Your email address will not be published. Required fields are marked *