FORTIN Infiniti QX50 2016 Push to Start Remote Starters and Alarm Systems Installation Guide

FORTIN Infiniti QX50 2016 Push to Start Remote Starters and Alarm Systems

REGULAR INSTALLATION

ADDENDUM
•	Immobilizer bypass
•	T-Harness available (sold separately)
•	Lock
•	Unlock
•	Arm
•	Disarm
•	Tachometer
•	Door Status
•	Trunk Status
•	Hood Status
•	Hand-Brake Status
•	Foot-Brake Status
•	Push-to-Start Control
•	OEM Remote monitoring
•	R.S. OEM remote Stand Alone compatible

INFINITI

	BYPASS FIRMWARE VERSION VERSION LOGICIELLE CONTOURNEM 72.[48] NISSAN/INFINITI MINIMUM	To add the firmware version and the options, use the FLASH LINK UPDATER or FLASH LINK MOBILE tool, sold separately.
	Program remote starter option:	FUNCTION	MODE	DESCRIPTION
		31	4	(+) Parking Light (E1) (+) Accessory (E2)
	Program remote	FUNCTION	MODE
	Program remote starter option for R.S. OEM REMOTE STAND ALONE:	32	3	DK.Blue (GWR) Shut Down After
		38	2	Enable Press 3x Lock to remote start with the OEM remote
	Program bypass option:	UNIT OPTION	DESCRIPTION
		C1	OEM Remote status (Lock/Unlock) monitoring
		D6	Push-to-Start Push-to-Start
IF THE VEHICLE IS NOT EQUIPPED WITH FUNCTIONAL HOOD PIN:		A11	Hood trigger (Output Status). Contact de capot (état de sortie).

MANDATORY INSTALL

*HOOD NON PIN

HOOD STATUS : THE HOOD PIN SWITCH (INCLUDED) MUST BE INSTALLED IF THE VEHICLE CAN BE REMOTE STARTED WITH THE HOOD OPEN, SET FUNCTION A11 TO OFF

SECURITY STICKER

Included

Notice: the installation of safety elements are mandatory. The hood pin and the sticker are essential security elements and must be installed.

THIS MODULE MUST BE INSTALLED BY A QUALIFIED TECHNICIAN. A WRONG CONNECTION CAN CAUSE PERMANENT DAMAGE TO THE VEHICL

This guide may change without notice. See www.fortin.ca for latest version.

DESCRIPTION

AUTOMATIC TRANSMISSION WIRING CONNECTION

KEY BYPASS PROGRAMMING PROCEDURE 1/2

insert the key in to the key port

	Press and hold the programming  button:Connect the 6-PIN  Main harness (White connector). ⮑The Blue, Red, Yellow and  Blue & Red LEDs  will alternatively illuminate.
	Release the  programmingbutton when the LED is YELLOW.
	If the LED is not solid YELLOW disconnect the 6-Pin connector (Main-Harness) and  go back to step
	Insert the required remaining connectors
	Press and release the programming button two (2x) times. ⮑The YELLOW LED will flash 2 times each second. 4WAIT for the YELLOW LED to tum ON solide
	Press and release the Push-to-Start button once (x1 ). ⮑ The RED LED will turns ON.
	the YELLOW and RED  LED’s arenot solid, press and release the PTS button twice to turn OFF the engine and then press and release the PTS button once again to turn the Accessory ON. Repeat this step until the YELLOW and RED LED’s are solid.
	Press and release the Push-to-Start button once (x1 ). ⮑The BLUE LED to flash rapidly.
	Press and release the Push-to Start button once to shut off the ignition.
	Press and release the  Push-to Start button twice to turn ON  the ignition.
	⮑ +The BLUE, YELLOW and  RED LED’s will rapidly alternate.
	The YELLOW LED begins to flash rapidly: Key bypass programmed.
	Press and release the Push-to Start button once to shut off the ignition.
	The module is now programmed Use the remote of the remote starter or securely system to test all the supported features to ensure proper programming

REMOTE STARTER PROGRAMMING PROCEDURE

REFER TO THE QUICK INSTALL GUIDE INCLUDED WITH THE MODULE FOR THE REMOTE STARTER PROGRAMMING.

REMOTE STARTER FUNCTIONALITY

All doors must be closed.
Remote start the vehicle.

Unlock the doors with either:

• The OEM remote
• The remote-starter remote
• Or the proximity remote

Enter the vehicle with the Intelligent Key.

The vehicle can now be put into gear and driven.

If the vehicle is not unlocked with one of these conditions the remote-starter will shut down as soon as any door is opened.

Module label

Notice: Updated Firmware and Installation Guides Updated fi rmware and installation guides are posted on our web site on a regular basis. We recommend that you update this module to the latest fi rmware and download the latest installation guide(s) prior to the installation of this product.

WARNING
The information on this sheet is provided on an (as is) basis with no representation or warranty of accuracy whatsoever.
It is the sole responsibility of the installer to check and verify any circuit before connecting to it. Only a computer safe logic probe or digital multimeter should be used. FORTIN ELECTRONIC SYSTEMS assumes absolutely no liability or responsibility whatsoever pertaining to the accuracy or currency of the information supplied. The installation in every case is the sole responsibility of the installer performing the work and FORTIN ELECTRONIC SYSTEMS assumes no liability or responsibility whatsoever resulting from any type of installation, whether performed properly, improperly or any other way. Neither the manufacturer or distributor of this module is responsible of damages of any kind indirectly or directly caused by this module, except for the replacement of this module in case of manufacturing defects. This module must be installed by qualifi ed technician. The information supplied is a guide only. This instruction guide may change without notice. Visit www.fortinbypass.com to get the latest version.

TECH SUPPORT

Tél: 514-255-HELP (4357) 1-877-336-7797
ADDENDUM GUIDE
www.fortinbypass.com
WEB UPDATE 

Documents / Resources

FORTIN Infiniti QX50 2016 Push to Start Remote Starters and Alarm Systems [pdf] Installation Guide Infiniti QX50 2016 Push to Start Remote Starters and Alarm Systems, Infiniti QX50, 2016 Push to Start Remote Starters and Alarm Systems, Remote Starters and Alarm Systems, Starters and Alarm Systems

References

• Remote Car Starters, Car Alarms, Immobilizer Bypass and Connected Vehicle Solutions | Fortin Electronic Systems
• Remote Car Starters, Car Alarms, Immobilizer Bypass and Connected Vehicle Solutions | Fortin Electronic Systems
• Remote Car Starters, Car Alarms, Immobilizer Bypass and Connected Vehicle Solutions | Fortin Electronic Systems
• User Manual