PeakTech 7250 Transport Cases with Aluminium Frames
Product Information
PeakTech 7250 – 7340
The PeakTech 7250 – 7340 is a series of transport cases with aluminum frames designed to provide ample space for equipment storage. These cases are made with composite material side walls that have a water-repellent coating. The cases are available in different models and sizes to suit various needs.
The transport cases do not offer separate protection against highly flammable or explosive materials. They also do not have pressure valves and are not airtight. It is important to note that the locking mechanisms of the cases can pose a risk of injury, so caution should be exercised during usage. The dimensions provided for each model are approximate and may vary by a few millimeters. The foam inside the cases can be compressed, which may also lead to slight variations in dimensions. The PeakTech 7250 – 7340 series complies with the requirements of the European Union Directive 2011/65/EU (RoHS) for CE conformity. Any damage caused by non-observance of the provided instructions is excluded from claims.
Product Usage Instructions
PeakTech 7250 – 7340
- Ensure that the transport case is suitable for your specific needs based on the provided dimensions and model information.
- Do not use the transport case for storing highly flammable or explosive materials as it does not offer separate protection against them.
- Take caution when handling the locking mechanisms to avoid injury. Always act carefully and considerately.
- Avoid overloading the transport case to prevent breakaway holders and injuries from falling parts.
- Make sure that the lid is completely flush closed before locking to ensure proper closure of the locks.
- Before locking, ensure that the snap locks are closed properly to allow the locks to grip securely.
- When storing equipment, utilize the provided cube foam inside the case to secure and protect your objects.
- Remember that the dimensions provided are approximate and may vary slightly due to the design and compression of the foam.
- Obtain written permission from the publisher before reproducing any part of the user manual through methods such as photocopying or microfilming.
- Keep in mind that technical changes may be made to the unit for progress purposes. Refer to the latest version of the manual for up-to-date information.
All rights reserved, including those of translation, reprint, and reproduction of this manual or its parts.
OPERATING INSTRUCTIONS ALUMINIUM FRAME CASE
notes on the application
This product complies with the requirements of the following European Union Directives for CE conformity: 2011/65/EU (RoHS).
Damage caused by non-observance of the following instructions is excluded from claims of any kind.
- These transport cases do not provide separate protection against highly flammable or explosive materials.
- These transport cases do not offer pressure valves and do not seal airtight.
- Locking mechanisms always bear the risk of injury by trapping body parts. Always act carefully and considerately
- Do not overload transport containers to avoid breakaway holders and injuries from falling parts.
introduction
- These transport cases with aluminum frames offer plenty of space for your equipment at an excellent price/performance ratio.
- The side walls are made of composite material and have a water-repellent coating.
- The objects to be transported can be ideally integrated into the easy-to-machine cube foam.
notes on the closure
These transport cases have two lockable latches with additional snap locks. Please note the following information:
- The lid must be completely flush closed so that the locks can close properly.
- Before locking, it is imperative that the snap locks are closed, otherwise, the locks cannot grip properly.
models and sizes
| Model | Dimension outside | Dimension inside |
| P 7250 | 298 x 70 x 90 mm | 285 x 40 x 77 mm |
| P 7255 | 295 x 70 x 195 mm | 285 x 60 x 185 mm |
| P 7260 | 370 x 80 x 230 mm | 360 x 60 x 220 mm |
| P 7265 | 390 x 100 x 280 mm | 380 x 80 x 270 mm |
| P 7270 | 500 x 120 x 350 mm | 490 x 100 x 340 mm |
| P 7300 | 320 x 150 x 250 mm | 300 x 130 x 235 mm |
| P 7305 | 405 x 150 x 330 mm | 390 x 130 x 315 mm |
| P 7310 | 460 x 150 x 330 mm | 445 x 130 x 315 mm |
| P 7330 | 400 x 100 x 300 mm | 380 x 80 x 285 mm |
| P 7335 | 450 x 150 x 350 mm | 440 x 135 x 335 mm |
| P 7340 | 550 x 200 x 400 mm | 540 x 185 x 390 mm |
Note: Due to the design, the dimensions are approximate and may vary by a few millimeters. The foam can be compressed, which can also lead to different dimensions.
- All rights reserved, including those of translation, reprint, and reproduction of this manual or parts thereof.
- Reproductions of any kind (photocopy, microfilm, or any other method) are only permitted with the written permission of the publisher.
- Last version at the time of printing. We reserve the right to make technical changes to the unit in the interests of progress.
- Misprints and errors excepted.
- We hereby confirm that all units meet the specifications stated in our documents and are delivered calibrated at the factory. A repetition of the calibration after 1 year is recommended.
PeakTech Prüf- und Messtechnik GmbH – Gerstenstieg 4 –DE-22926 Ahrensburg / Germany
- +49-(0) 4102-97398 80
- +49-(0) 4102-97398 99
- info@peaktech.de.
- www.peaktech.de.
Documents / Resources
 |
PeakTech 7250 Transport Cases with Aluminium Frames [pdf] User Manual 7250 Transport Cases with Aluminium Frames, 7250, Transport Cases with Aluminium Frames, Cases with Aluminium Frames, Aluminium Frames |
Home 