maxima 08400400 Food Processor Instruction Manual

Contents hide

1 maxima 08400400 Food Processor

2 Product Information

3 Product Usage Instructions

4 Intended use

5 Safety regulations

6 PRODUCT DESCRIPTION

7 INTRODUCTION

8 INSTALLATION

9 OPERATION AND CLEANING

10 Circuit diagram

11 Exploded view and spare parts lists

12 Documents / Resources

12.1 References

maxima 08400400 Food Processor

Product Information

Specifications:

Model: Bowl Cutter

Model Numbers: 08400400 / 08400900
Intended Use: Food processing in restaurants, canteens, and similar catering establishments

Material: Full stainless steel body
Safety Features: Compliant with applicable safety directives

Product Usage Instructions

Intended Use:
This bowl cutter is designed for food processing in commercial settings such as restaurants and canteens. It is not suitable for processing meat with bones, tough skin, shells, or fish scales. Avoid cutting vegetables or fruits with hard skins or nuts to prevent damage to the machine.

Safety Regulations:

Operate the appliance on a level, stable, clean, heat-resistant, and dry surface.
Wear protective gloves when operating or cleaning the machine.

Ensure the power cord is securely routed to prevent tripping hazards.
Always assemble the appliance properly before use.

Avoid using external timers or remote-control systems with the appliance.
Switch off and unplug the appliance before cleaning, maintenance, or storage.

Avoid contact with moving parts, including the cutting blade.
Allow sufficient ventilation space around the appliance during operation.

Do not wash the appliance with water to prevent electric shock.
Do not move the appliance while in operation; unplug and hold it securely when moving.

FAQ:

Q: Can I use this bowl cutter for processing meat with bones?
A: No, this machine is not intended for processing meat with bones, tough skin, shells, or fish scales.

Q: Is it safe to wash the appliance with water?
A: No, washing the appliance with water can cause leakage and increase the risk of electric shock. Avoid washing any parts with water.

Keep these instructions with the appliance. You should read this user manual carefully before using the appliance.

Dear Customer,
Thank you for purchasing this appliance. Please take a few minutes before starting the operation of the appliance and read the following operating instructions.

Intended use

This machine is designed for food processing in restaurants, canteens and similar catering establishments.

The machine is not intended to process meat that has bone, tough skin, shells or fish scales. Neither use this machine to cut vegetables or fruit with nuts or tough skin. Otherwise, it might lead to damage to the machine, property or personal injury.
The machine is intended for commercial and indoor use by trained and skilled personnel familiar with these instructions.

The machine body is built in full stainless steel for easy cleaning and maintenance. It has safety features compliant with the applicable safety Directives.

Safety regulations

Safety regulations

This appliance is intended for commercial use only and must not be used for households.
The appliance must only be used for the purpose for which it was intended and designed. The manufacturer is not liable for any damage caused by incorrect operation and improper use.

Keep the appliance and electrical plug away from water and any other liquids. If the appliance should fall into the water, immediately remove the plug from the socket and do not use it until the appliance has been checked by a certified technician. Failure to follow these instructions could cause a risk to lives.
Never attempt to open the casing of the appliance yourself.
Do not insert any objects in the casing of the appliance.
Do not touch the plug with wet hands.
The danger of electric shock! Do not attempt to repair the appliance yourself. In case of malfunctions, repairs are to be conducted by qualified personnel only.
Never use a damaged appliance! Disconnect the appliance from the electrical outlet and contact the retailer if it is damaged.
Do not immerse the electrical parts of the appliance in water or other liquids. Never hold the appliance under running water.
Regularly check the power plug and cord for any damage. If the power plug or power cord is damaged, it must be replaced by a service agent or similarly qualified persons to avoid danger or injury.
Make sure the cord does not come in contact with sharp or hot objects and keep it away from open fire. To pull the plug out of the socket, always pull on the plug and not on the cord.
Ensure that the cord ( or extension cord) is positioned so that it will not cause a trip hazard.
Always keep an eye on the appliance when in use.
As long as the plug is in the socket the appliance is connected to the power source.
Turn off the appliance before pulling the plug out of the socket.
Never carry the appliance by the cord.
Do not use any extra devices that are not supplied along with the appliance. 2.1.18 Only connect the appliance to an electrical outlet with the voltage and frequency mentioned on the appliance label.
Connect the power plug to an easily accessible electrical outlet so that in case of emergency the appliance can be unplugged immediately. To completely switch off the appliance pull the power plug out of the electrical outlet.
Always turn the appliance off before disconnecting the plug.

Never use accessories other than those recommended by the manufacturer. Failure to do so could pose a safety risk to the user and could damage the appliance. Only use original parts and accessories.
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge. 2.1.23 This appliance must not be used by children under any circumstances.
Keep the appliance and its cord out of reach of children.

Always disconnect the appliance from the mains if it is left unattended or is not in use and before assembly, disassembly or cleaning.
Never leave the appliance unattended during use.

Special Safety Regulations

The appliance is intended for commercial and indoor use by trained and skilled personnel familiar with these instructions.
This machine is designed for food processing in restaurants, canteens and similar catering establishments.
Any other use might lead to damage to the appliance or personal injury.

Do not place the appliance on a heating object (gasoline, electric, charcoal cooker, etc.) Keep the appliance away from any hot surfaces and open flames. Always operate the appliance on a level, stable, clean, heat-resistant and dry surface.
The danger of injury! Care is needed when operating or cleaning. Wear protective gloves (not supplied) if necessary.
Caution! Securely route the power cord if necessary, to prevent unintentional tripping over and falling.

Do not use the appliance before it is properly assembled.
This appliance is not intended to be operated using an external timer or a separate remote-control system.
Never bypass any safety interlocks on the appliance.

WARNING: ALWAYS switch off the appliance and unplug from the electrical power supply before cleaning, maintenance or storage.
WARNING: ALWAYS keep hands, long hair and clothing away from the moving parts.
WARNING: Take great care when handling the cutting blade. Wear protective gloves (not supplied) if necessary.

Allow at least 15cm spacing around the appliance for ventilation purposes during use. 2.2.14 Do not wash the appliance with water or water jet. Washing with water can cause leakage and increase the risk of electric shock. No parts are dishwasher safe.
Do not move the appliance while it is in operation. Unplug the appliance when moving and hold it at the bottom.
Special care should be taken when moving or transporting the appliance due to heavyweight. With at least 2 people or using a trolley for assistance. Move the machine slowly, and carefully and never be inclined over 45°.

This appliance is equipped with a cord having a grounding wire with a grounding plug, the plug must be plugged into an outlet that is properly installed and grounded.

PRODUCT DESCRIPTION

Parts of description

MAIN TECHNICAL PARAMETERS

MODEL

(mm)

CAP CITY

SPEED

(rpm)

POWER (W )

VOLTAGE

NET WEIG HT

N oise Level

08400400

08400900

410

380

620

680

12L

18L

1500RPM /

2800RPM

2200

2600

220V-240V~

50/60Hz;

28 kg

28.5 kg

62dB

Surface condition for food and splash area: 3.2 micrometres

Remark: Technical specifications are subject to change without prior notification.

INTRODUCTION

Preparation for first use
Check to make sure the appliance is undamaged. In case of any damage, contact your supplier immediately and do NOT use the appliance.

Remove all the packing material and protection film (if applicable). Keep the packaging for future storage.
Clean the appliance, see 4.6 Cleaning.
Place the appliance on a level and steady surface, unless mentioned otherwise.

Make sure there is enough clearance around the appliance for ventilation purposes.
Position the appliance in such a way that the plug is accessible at all times.
The machine must be used only by trained staff with perfect knowledge of the safety standards contained in this manual.

If staff turnover is necessary, provide training beforehand.
Make sure the power outlet ratings correspond to the specifications printed on the rating plate.
Make sure that the machine is connected to a grounding system.

Even if safety systems are installed on the machine, prevent approaching moving parts with hands and do not touch the machine with wet hands.
Disconnect the machine’s socket from the electricity before carrying out any cleaning or maintenance operations.
Do not clean with a high-pressure water jet.

Regularly check the condition of the power cable. Avoid leaving the power cable in regularly check the condition of the power cable. Avoid leaving the power cable in contact with hot or sharp surfaces and do not pull it to remove the plug from the power socket.
It is strongly recommended that the operator contact the after-sales centre if there is any problem or malfunction occurs. Please do not dismantle the machine or in place of unauthorized parts.
The manufacturer will be not responsible for the following cases:

If the machine tampers with or safety functions are installed by non-authorized staff.
If the components are replaced by unauthorized parts.
If the instruction in this manual is not carefully followed.

If the machine surfaces are treated with an unsuitable substance or solvent.

Safety devices

Micro-switch: The micro-switch is equipped with a magnet mechanism. The appliance stops automatically when the bowl is covered or the bowl is opened during operation.

Overcurrent protection switch (Circuit breaker): The switch is designed to protect the electrical circuit from damage caused by excess current as a result of an overload or short circuit. The switch interrupts current flow after a fault is detected.

Note: To reset the switch, press it after the issue is solved.

INSTALLATION

Packing and unpacking

Remove all packaging materials. Keep the packaging for future storage.
Ensure the packages you receive include the following items:
After unpacking all the accessories, lay them on a flat and stable surface.

Make sure the delivery contents are complete and free of any damage. If you find that parts are missing or show damage, do not use the appliance but contact your dealer.
Clean the bowl, bowl cover, blade and other parts which contact with food.

Installation area

The selected machine work setting must be sufficiently lit and have an electric power outlet.
The workplace must be sufficiently large, perfectly level and dry. The machine should be installed in non-explosive environments. In any case, installation should be carried out by taking into account any applicable industrial safety regulations in force.

Electric connection

DANGER-CAUTION: The electric connection to the power outlet should be operated by skilled personnel.
Check for the perfect efficiency of the plant grounding system. Make sure that the line voltage (V) and frequency (Hz) correspond to the machine ratings (refer to the machine identification plate and wiring diagram). The machine comes equipped with an electric cable with a plug. Plug the machine into a main wall switch with a differential.

OPERATION AND CLEANING

Place the middle base onto the bottom base as pic 1, and move the bowl in the arrow Direction.

Plug in the ain power aw the appliance on and start to work.

Safety micro-switches

The appliance is equipped with two safety microswitches. These switches cut off the power supply if, during operation, the handle is lifted beyond a certain distance or the cover is opened.

The machine will not be started if the cover is closed only but the bowl is not in the correct position. Before you start with the machine, you should make sure that the shaft is rotating in an anticlockwise direction. Otherwise, the bowl cutter will not cut food.

Operation

Connect the power plug to a socket outlet.

Open the bowl cover
Lift the cover and feed the food into the bowl, close the cover.
Pthe press the ON button. The operating light in the ON button will light up and the appliance will start working. For continuous cutting, you may open the rubber lid and feed oil or seasoned from it.

Warning!

Never put food over 2/3 of the bowl. The recommended minimal volume is not lower than the blade level. Lacking food leads to vibration. If food is too big, cut it to a suitable size before feeding.
The appliance is not allowed no-load running over t3030mins

When you are finished, press the OFF button, unplug the appliance and clean it.

Cleaning

Clean the machine after each use.
Switch off and unplug the machine before cleaning or maintenance and let it cool down completely.
Do not clean the machine with steel wool, strong chemicals, abrasive or toxic agents, as they may damage the surface of the machine and pose a health hazard.

Use clear water during cleaning. Make sure that the electrical parts/connections of the machine do not become wet.
Do not clean the electric components, e. g. switch, button, timer knob etc., with high-pressure water jets or extremely hot steam.
Wipe the outside of the machine at least once a month with a soft damp cloth, and if necessary, a little mild detergent. Also make sure to clean the bowl cover (incl. the gasket), delivery chute and basins thoroughly after each use. Dry with a soft dry cloth.

Open the bowl cover and remove the knives from the bowl. Clean the knives and bowl interior with a suitable brush. Rinse them with clear water afterwards.
The machine may only be used again or stored after it is dried completely.

Note 1:
It is recommended to remove the knives and check the bowl and bowl cover for blockage and residues after each operating cycle.

WARNING! BLADES ARE SHARP. Clean with care!

Note 2: The knives are NOT suitable for the dishwasher.

Circuit diagram

Models: 08400400/08400900

Exploded view and spare parts lists