OHAUS-logo

OHAUS Endeavor 5000 Series Light Duty Shakers

OHAUS-Endeavor-5000-Series-Light-Duty-Shakers-product

Product Information

Specifications:

  • Name: EndeavorTM 5000 Series
  • Variants:
    • EN: Open Air Shaker, e-E51LD0420
    • ES: Open Air Shaker, e-E51LD0403
    • FR: Microplate Shaker, e-E51LDMP03
  • Instruction Manual: Available in multiple languages (EN, ES, FR, DE, IT)

Product Usage Instructions

Introduction
This manual contains installation, operation, and maintenance instructions for the Ohaus Endeavor 5000 Series. Please read the manual completely before using it.

Safety Information
Safety notes are marked with signal words and warning symbols. Ignoring the safety notes may lead to personal injury, damage to the instrument, malfunctions, and false results.

  • Warning Symbols:
    • General hazard
    • Electric shock hazard
  • Safety Precautions:
    • Read all safety warnings before installing or servicing the equipment.
    • Operate the unit on a level surface for best performance and safety.
    • Disconnect the unit from power before maintenance.
    • Remove spills promptly and do not immerse the unit for cleaning.

Intended Use
Specify the intended use of the product here.

Package Contents
List the items included in the package upon purchase.

Installation
Provide step-by-step instructions for installing the product properly.

Frequently Asked Questions (FAQ):

  • Q: What should I do if the unit shows signs of electrical or mechanical damage?
    A: Do not operate the unit and seek professional servicing immediately to avoid any risks.
  • Q: Can I clean the unit by immersing it in water?
    A: No, do not immerse the unit for cleaning. Follow the recommended cleaning instructions in the manual.

Change History

# Date Version Descriptions
1 2023.7.27 A New Release

INTRODUCTION

This manual contains installation, operation, and maintenance instructions for the Ohaus Endeavor 5000 Series. Please read the manual completely before using it.

Safety Information
Safety notes are marked with signal words and warning symbols. These show safety issues and warnings. Ignoring the safety notes may lead to personal injury, damage to the instrument, malfunctions, and false results.

  • WARNING For a hazardous situation with medium risk, possibly resulting in severe injuries or death if not avoided.
  • CAUTION For a hazardous situation with low risk, resulting in damage to the device or the property in loss of data, or minor or medium injuries if not avoided.
  • ATTENTION For important information about the product. May lead to equipment damage if not avoided.
  • NOTE For useful information about the product.

Warning Symbols 

  • General hazard
  • Electric shock hazard

Safety Precautions

  • CAUTION: Read all safety warnings before installing, making connections, or servicing this equipment. Failure to comply with these warnings could result in personal injury and/or property damage. Retain all instructions for future reference.
  • Always operate the unit on a level surface for the best performance and maximum safety
  • DO NOT lift the unit by the tray.
  • Disconnect the unit from the power supply before maintenance and servicing.
  • Spills should be removed promptly.
  • DO NOT immerse the unit for cleaning.
  • DO NOT operate the unit if it shows signs of electrical or mechanical damage.
  • WARNING! The protection provided by the unit may be impaired if used with accessories not provided or recommended by the manufacturer or used in a manner not specified by the manufacturer.
  • WARNING! DO NOT use the unit in a hazardous atmosphere or with hazardous materials for which the unit was not designed.
  • CAUTION: To avoid electrical shock, completely cut off power to the unit by disconnecting the power cord from the unit or unplugging it from the wall outlet.
  • Earth Ground – Protective Conductor Terminal
  • Alternating Current

Intended Use
This instrument is intended for use in laboratories. It must only be used for processing materials as described in these operating instructions. Any other type of use and operation beyond the limits of technical specifications, without written consent from OHAUS, is considered as not intended. This instrument complies with current industry standards and recognized safety regulations; however, it can constitute a hazard in use. If the instrument is not used according to these operating instructions, the intended protection provided by the instrument may be impaired.

Package Contents
  • Light Duty Shaker or Microplate Shaker
  • Power cord
  • Power supply
  • Non-skid rubber mat (Light Duty Shaker only)
  • V-clips and springs to secure microplates (Microplate Shaker only)

Installation

  • Upon receiving the Ohaus Light Duty/Microplate Shaker check to ensure that no damage has occurred during shipment. Any damage that occurred in transport must be detected at the time of unpacking. If you do find such damage, the carrier must be notified immediately.
  • After unpacking, place the Light Duty/Microplate Shaker on a level bench or table, away from explosive vapors. Secure to an immovable work surface by pressing down on the four (4) corners of the unit, creating a strong suction to the work surface (DO NOT place on a bench mat or press on the tray). Do not position the equipment such that it is difficult to disconnect the power cord during use. Always place the unit on a clean and sturdy work surface.
  • Plug the power supply provided with the Light Duty/Microplate Shaker into the power jack on the back of the unit. Only use the power supply provided with the unit. The Light Duty/Microplate Shaker is supplied with a 3 conductor, grounded power cord. Connect the provided power supply to the power cord and plug the power cord into a standard grounded outlet.
  • If the cord supplied does not meet your needs, please use an approved power cord that has ratings equal to or exceeding those of the originally provided cord and that complies with the local/national regulations of the country in which the equipment is to be used.

Specifications

Endeavor™ 5000 Light Duty Shaker, 20 mm Orbit (e-E51LD0420)

OHAUS-Endeavor-5000-Series-Light-Duty-Shakers-fig- (1)

Dimensions (L x W x H) 42.0 x 26.2 x 11.9 cm (16.5 x 10.3 x 4.7 in.)
Tray dimensions 30.0 x 22.2 cm (11.75 x 8.75 in.)
Tray material Aluminum tray with 11 mounting points for accessories and non-slip rubber mat
Electrical 24VDC / 1.25A
Motion Orbital 20 mm (0.8 in.)
Speed range 50 – 300 rpm
Speed increments 1 rpm
Speed Accuracy** Above 100 rpm ± 2% of set speed Below 100 rpm ± 2 rpm
Timer Up to 99 hours 59 minutes
 

 

Tray capacity

4.0 kg (8.8 lb.)

4 x 500 mL flasks

6 x 250 mL flasks

6 x 125 mL flasks

Up to 3 x 1 L flasks***

Drive System Brushless DC Motor, Triple Eccentric
IP Rating IP21
Net weight 7.5 kg (16.5 lb.)
Ship weight 9.9 kg (21.8 lb.)
  • Conditions permitting. Variations in the measurement process, vessel(s), and sample(s) will impact actual performance.
  • Universal Platform 30770938 required for a 3 x 1 L flask capacityOHAUS-Endeavor-5000-Series-Light-Duty-Shakers-fig- (2)

Endeavor™ 5000 Light Duty Shaker, 3 mm Orbit (e-E51LD0403)

OHAUS-Endeavor-5000-Series-Light-Duty-Shakers-fig- (3)

Dimensions (L x W x H) 42.0 x 26.2 x 11.9 cm (16.5 x 10.3 x 4.7 in.)
Tray dimensions 30.0 x 22.2 cm (11.75 x 8.75 in.)
Tray material Aluminum tray with 11 mounting points for accessories and non-slip rubber mat
Electrical 24VDC / 1.25A
Motion Orbital 3 mm (0.1 in.)
Speed range 100 – 800 rpm
Speed increments 1 rpm
Speed Accuracy** Above 100 rpm ± 2% of set speed Below 100 rpm ± 2 rpm
Timer Up to 99 hours 59 minutes
 

 

Tray capacity

4.0 kg (8.8 lb.)

4 x 500 mL flasks

6 x 250 mL flasks

6 x 125 mL flasks

Up to 3 x 1 L flasks***

Drive System Brushless DC Motor, Triple Eccentric
IP Rating IP21
Net weight 7.5 kg (16.5 lb.)
Ship weight 9.9 kg (21.8 lb.)
  • Conditions permitting. Variations in the measurement process, vessel(s), and sample(s) will impact actual performance.
  • Universal Platform 30770938 required for a 3 x 1 L flask capacity

OHAUS-Endeavor-5000-Series-Light-Duty-Shakers-fig- (4)

Endeavor™ 5000 Microplate Shaker, 3 mm Orbit (e-E51LDMP03)

OHAUS-Endeavor-5000-Series-Light-Duty-Shakers-fig- (5)

Dimensions (L x W x H) 42.0 x 26.2 x 11.9 cm (16.5 x 10.3 x 4.7 in.)
Tray dimensions 28.0 x 19.7 cm (11 x 7.75 in.)
Tray material Aluminum
Electrical 24VDC / 1.25A
Motion Orbital 3 mm (0.1 in.)
Speed range 100 – 1200 rpm*
Speed increments 1 rpm
Speed Accuracy** Above 100 rpm ± 2% of set speed Below 100 rpm ± 2 rpm
Timer Up to 99 hours 59 minutes
Tray capacity 4 Microplates
Drive System Brushless DC Motor, Triple Eccentric
IP Rating IP21
Net weight 7.5 kg (16.5 lb.)
Ship weight 9.9 kg (21.8 lb.)
  • Microplates and deep well plates are available with a variety of skirt styles. Depending on the skirt style the maximum speed may need to be reduced.
  • Conditions permitting. Variations in the measurement process, vessel(s), and sample(s) will impact actual performance.OHAUS-Endeavor-5000-Series-Light-Duty-Shakers-fig- (6)

Device Setup

Light duty/microplate shaker

OHAUS-Endeavor-5000-Series-Light-Duty-Shakers-fig- (7)

  • A. LCD
  • B. Timer Adjustment Knob
  • C. Timer Status Indicator
  • D. Power Switch
  • E. Run/Speed Status Indicator
  • F. Speed Adjustment Knob
  • G. RS232 Port
  • H. DC Power Connector

Standard Tray Configurations
The Light Duty Shaker is supplied with a tray designed to hold a variety of accessories (available separately).

  1. Flat containers can be shaken by placing them on the non-skid rubber mat provided with the unit.
  2. The tray also has mounting holes ready for use with flask clamps or test tube racks. See below examples of tray configurations.

Installation of Flask Clamps – e-E51LD0420 and e-E51LD0403

  1. Turn the unit off with a power switch.
  2. Remove the non-skid rubber mat.
  3. Line up the hole(s) in the flask clamp to the hole(s) in the tray. Using the screw(s) provided, hand tighten into place using a flathead screwdriver. DO NOT over-tighten.
  4. Insert the flask/media bottle into the clamp and wrap the spring around the neck of the clamp to hold it securely. For PVC flask clamps, simply place the vessel in the clamp.

Installation of Test Tube Racks – e-E51LD0420 and e-E51LD0403

  1. Turn the unit off with a power switch.
  2. Remove the non-skid rubber mat.
  3. Align the clip on the rack to the side of the tray.
  4. Line up the holes in the test tube rack to the holes in the tray. Using the screws provided, hand tighten into place using a flathead screwdriver. DO NOT over-tighten.OHAUS-Endeavor-5000-Series-Light-Duty-Shakers-fig- (8)

Standard Tray Accessories for e-E51LD0420 and e-E51LD0403 (available separately)

OHAUS-Endeavor-5000-Series-Light-Duty-Shakers-fig- (9)

Installation of Sticky Mat
Sticky mats are recommended for flat bottom vessels with a wide base at low speeds. Sticky mat performance may diminish over time due to spills, dirt, and debris.

  1. Turn the unit off with a power switch.
  2. Remove the non-skid rubber mat.
  3. Place the sticky mat directly on the tray, then place the sample on the sticky mat. The sticky mat can be repositioned simply by peeling from the tray.
  4. Vessels can be removed by tilting to the side

Installation of Universal Harness
The Universal Harness attaches to the tray to secure low-profile plates.

  1. Turn the unit off with a power switch.
  2. Remove the non-skid rubber mat.
  3. To use the short bands, install the center post thumbscrew on the tray. Hand tighten into place DO NOT over tighten,
  4. Place sample(s) on tray.
  5. Place the short band under the bent-down corner of the tray stretch the short band over the sample(s) and then place it on the center post thumbscrew.
  6. To use the long bands, place the sample on the tradable bent-downing band under the bent-down corner of the tray, fetch diagonally over the sample, and secure to it the opposite bent-down corner.

Installation of Adjustable Platform
The Adjustable Platform has a non-skid rubber surface with adjustable clamping bars to accommodate various vessel types. Stainless steel construction.

  1. Turn the unit off with a power switch.
  2. Remove the non-skid rubber mat.
  3. Line up the holes in the Universal Platform to the holes in the tray. Using the screws provided, hand tighten into place using a flathead screwdriver. DO NOT over-tighten.
  4. Add glassware. Adjust rollers by loosening each of the thumbscrews. Slide the padded rollers to the desired position and retighten the thumbscrews.

Microplate Shaker Tray Setup
The Microplate Shaker is designed to hold two (2) or four (4) microplates, or two (2) Micro-Tube Racks.

  1. Turn the unit off with the power switch
  2. Place two (2) microplates or deep well blocks diagonally on the tray, or place four (4) microplates or deep well blocks on the tray. The plates/blocks do not have to be filled.
  3. Place the corner of the plate/block under the spring located at each corner of the tray.
  4. Slide plate/block into place. You are ready to use.

NOTE:
The tray on the Microplate Shaker is not designed to hold flask clamps

OHAUS-Endeavor-5000-Series-Light-Duty-Shakers-fig- (10)

Microplate Shaker Tray Configurations

OHAUS-Endeavor-5000-Series-Light-Duty-Shakers-fig- (11)

Installation of 1.5 to 2mL Micro-Tube Rack – Microplate Shaker e-E51LDMP03

  1. Turn the unit off with a power switch.
  2. Align the Micro-Tube Rack side-to-side on the tray.
  3. Press the Micro-Tube Rack in place, you will hear the Micro-Tube Rack clip into position. No mounting screws are required.

Microplate Shaker Tray Accessories e-E51LDMP03 (available separately)

OHAUS-Endeavor-5000-Series-Light-Duty-Shakers-fig- (12)

Installation of Deep Plate Kit, set of 4

  1. Turn the unit off with the power switch
  2. With a screwdriver remove V-Clips from the top plate
  3. Line up the Deep Plate Adapter with the openings on the top plate and screw in with the thumbscrew.
  4. Place deep well plates on the tray. If more tension is required tighten the thumbscrew to secure the deep well pate.

Universal Platform and Accessory Configurations for e-E51LD0420 and e-E51LD0403
The optional Universal Platform 30 x 22 cm e-E51LD (30770938) accessory is required for the configurations listed below. All flask clamps, medial bottle clamps, and tube racks are sold separately.

Installation of Universal Platform

  1. Turn the unit off with a power switch.
  2. Remove the non-skid rubber mat.
  3. Loosen the four (4) thumbscrews on the shake tray.
  4. Place the universal platform on the shaker tray by aligning the slots on the two sides of the platform over the four (4) screw knobs.
  5. Allow the platform to rest on the screws.
  6. When aligned and seated on the screws hand tighten the four (4) thumbscrews. DO NOT over-tighten.

OHAUS-Endeavor-5000-Series-Light-Duty-Shakers-fig- (13)

Flask Clamp, Media Bottle, and Tube Rack Configurations for Universal Platform
Turn the unit off with the power switch before installing accessories on the Universal Platform. See below examples of Universal Platform configurations.

OHAUS-Endeavor-5000-Series-Light-Duty-Shakers-fig- (14) OHAUS-Endeavor-5000-Series-Light-Duty-Shakers-fig- (15)

Installation of Flask Clamps and Media Bottles (Stainless Steel)

  1. Turn the unit off with the power switch
  2. Line up the opening(s) in the clamp to the openings in the platform. Hand-tighten screw(s) with a Phillips head screwdriver.
  3. Insert the flask or media bottle into the clamp and wrap the supplied spring around the neck of the clamp to hold secure

Installation of Flask Clamps (PVC)

  1. Turn the unit off with the power switch
  2. Line up the opening(s) in the clamp to the openings in the platform. Hand tightens the screw(s) on top of the washer with a flat-head screwdriver.
  3. Insert the flask into the clamp.

Installation of Tube Racks on a Universal Platform

  1. Turn the unit off with a power switch.
  2. Place one (1) adaptor bracket on the Universal Platform with the screw hole openings side facing the side of the platform. The flat wall side of the adapter bracket will be on the inside.
  3. Place the tube rack with the clip side facing the flat wall side of the adaptor bracket.
  4. Align the two (2) adaptor bracket screw hole openings and the two tube rack screw hole openings with four (4) compatible openings in the platform.
  5. Ensure there is tension on the tube rack so it will stay in position. If the tension is too tight or too loose, bend the clip accordingly.
  6. Using the four (4) 3/8” screws, first secure the adaptor bracket.
  7. Ensure there is tension on the test tube rack clip and then install the two (2) screws to secure the tube rack to the platform.
Digital Control Panel

OHAUS-Endeavor-5000-Series-Light-Duty-Shakers-fig- (16)

  • A. LCD Display for Time and Speed
    • Time Display: Displays accumulated time (continuous mode) or how much time is remaining (timed mode). The display range is from 0 to 99 hours 59 minutes. The display will indicate minutes and seconds until the timer reaches 59 minutes and 59 seconds (59:59), then the display will automatically display hours and minutes up to 99:59.
    • Speed Display: Displays the speed of the shaker. Turn the right knob (E) for setpoint control. Press knob (E) starts/stops the shaking function. The run/speed indicator light (C) will be illuminated when the unit is shaking.
  • B. Timer Status Indicator Light
    • Timed Mode: The indicator light will be illuminated while the time display is counting down. If the unit is paused while shaking with the timer set, then the indicator light will blink.
    • Continuous Mode: The timer is not set, the indicator light will be off during shaking while elapsed time counts up.
  • C. Run Status Indicator Light: Illuminates while the shaker is running.
  • D. Timer/Menu Adjustment Knob
  • E. Speed Adjustment Knob

OPERATION

Getting Ready

  1. Connect the provided power supply to the unit.
  2. Plug the female end of the provided power cord into the power supply and plug the male end of the power cord into a matching standard grounded outlet.
  3. Toggle the power switch to the ON ( • ) position.
  4. Allow the unit to complete the start-up sequence:
    • LCD Test – all display icons illuminate
    • Model Type, software version
    • Function Units Timer [Hours: Minutes], Shake Speed [RPM]
  5. The main operating screen will return, and the previous timer and shaker settings will be displayed.

Idle Mode

Timer

  1. By default, the timer will be set to 00:00 and count upwards when the shaking function is turned on.
    • The timer begins in MM: SS mode
    • Once the timer reaches 59:59 it will automatically switch to HH: MM mode at 01:00.
  2. When the timer is set to any time between 00:01 and 99:59, the timer will count downwards from the set time once the shaking function is turned on and the Timer Status indicator Light (B) will be illuminated.
    • The timer can only be set in HH: MM mode.
    • Once the timer reaches 01:00 in HH: MM mode, it will automatically switch to MM: SS mode at 59:59.
    • Once the timer reaches 00:00 in the countdown mode shaking functions will shut off, the unit will beep 1 time, and “End” will appear on the display (A, Figure 1).

Adjust Timer

  1. Rotate the Time Adjustment Knob (D, Figure 1).
    • The minutes will blink on the display.
    • Rotate the knob to adjust the minminute’slue
    • Quick press the Time Adjustment Knob (D) to select the minminute’slue
    • The hours will now blink on the display.
    • Rotate the Time Adjustment Knob (D) to adjust the houhour’slue
    • Quick press the Time Adjustment Knob (D) to confirm the hour’s value and the timer setting

Reset Timer to Zero

  1. Rotate Time Adjustment Knob (D) so that either minutes or hours are blinking
  2. Press and hold Time Adjustment Knob (D) until 00:00 is on the timer display

Adjust Set Speed

  1. Rotate the Speed Adjustment Knob (E, Figure 1) to the desired setting

Shake Mode

  1. Start Shake Function
    1. Press and hold the Speed Adjustment Knob (E) until the unit beeps and the Run Status Indicator (C, Figure 1) illuminates.
  2. Adjust Speed while shaking
    1. Rotate the Speed Adjustment Knob (E)
    2. The Run Status Indicator Light (C) will blink indicating the unit is ramping to the new speed setting.
    3. Once the unit reaches the new speed setting the Run Status Indicator Light (C) will be illuminated and stop blinking
  3. Adjust Remaining Time (count down only when the timer is set)
    1. Rotate the Time Adjustment Knob (D) to adjust the minutes value. The minute’s value will blink while making adjustments.
    2. Quick press the Time Adjustment Knob (D) to confirm the minute’s value, and now the hour’s value will blink.
    3. Rotate the Time Adjustment Knob (D) to adjust the hour’s value
    4. Quick press the Time Adjustment Knob (D) to confirm the hour’s value and the new timer setting
      NOTE: When making adjustments and the minute or hour is blinking; if the time setting remains idle without confirmation for 6 seconds it will reset to the current setting.
  4. Stop Shake
    1. Press and hold the Speed Adjustment Knob (E) until the unit beeps and the Run Status Indicator Light (C) turns off

Pause Mode
Pause mode intends to allow the user to stop the shaking function while maintaining the runtime/remaining time value. The display (A) will show “PAUS”, the Run Status Indicator (C) remains off while the Timer Status Indicator (D) blinks to indicate a paused timer.

Pause mode must be enabled within the Settings Menu to allow access to this function.

  • Pause Shake (when Pause feature is enabled in the Menu)
    1. Quick press the Speed Adjustment Knob (E)
    2. The unit will stop shaking and “PAUS” will appear on the display (A) and stop the timer
  • Adjust Remaining Time (count down only)
    1. Rotate the Time Adjustment Knob (D) to adjust the minutes value. The minute’s value will blink while making adjustments.
    2. Quick press the Time Adjustment Knob (D) to confirm the minute’s value, and now the hour’s value will blink.
    3. Rotate the Time Adjustment Knob (D) to adjust the hour’s value
    4. Quick press the Time Adjustment Knob (D) to confirm the hour’s value and the new timer setting
  • Resume Shake Function
    1. Quick press the Speed Adjustment Knob (E)
    2. The unit will start shaking, and the Run Status Indicator Light (C) and the Timer Status Indicator Light (B) will illuminate.
  • Stop Shake
    1. Press and hold the Speed Adjustment Knob (E) until the unit beeps and the Run Status Indicator (C) turns off

Operating Tips

  • Centering your sample and even weight distribution on the tray or platform helps with balance and stability.
  • Ensure the unit is secure on a level work surface by pressing down on the four (4) corners of the unit, creating a strong suction to the work surface.
  • As a safety feature, a built-in program will shut power off to the motor if the tray is prevented from rotating, or the unit is overloaded beyond its recommended weight capacity and displays an E4 error.
  • If the load is within specifications and centered on the tray and an E4 error persists, disabling the Overload Detection feature in the Menu may resolve this fault.
  • Built-in memory maintains the last used speed and time settings during a power interruption.
  • Avoid cold starts. The unit is not designed to start after being in a cold room environment. Bring the unit into the cold room from a room temperature environment, operate and remove the unit from the cold room as soon as the operation is complete
Settings Menu

Menu Access

  • While in Idle Mode, press and hold the Time Adjustment Knob (D) until “MENU” is displayed

Navigation

  • Rotate either the Time Adjustment Knob (D) or Speed Adjustment Knob (E)
  • Quick press either the Time Adjustment Knob (D) or Speed Adjustment Knob (E) to access submenu/select option
  • To exit the Menu at any time, toggle the power switch.

OHAUS-Endeavor-5000-Series-Light-Duty-Shakers-fig- (17)

Recall

  • While in Idle Mode, press and hold the Time Adjustment Knob (D) until “MENU” is displayed
  • After “MENU” is displayed “RECALL” will appear on the display.
  • Recall previous run conditions
    • Quick press either the Time Adjustment Knob (D) or Speed Adjustment Knob (E).
    • Rotate either knob to navigate through the previous 5 unique run conditions
    • To select a recall run condition, press and hold the Speed Adjustment Knob (E) until the unit beeps and the Run Status Indicator (C, Figure 1) illuminates.
    • The unit will now run at the recall timer and speed setting that was selected.

User Programs

  • The User Programs feature allows the user to create, store, delete, and run a series of shaking programs for repeat applications in the lab.
  • Each program can have a maximum of 5 steps and a time must be entered for each step. To keep the shaking off during a step enter “0” for the speed.
  • The unit will store up to 8 individual 5-step programs.

To access the Program Feature:

  • While in Idle Mode, press and hold the Time Adjustment Knob (D) until “MENU” is displayed, after “MENU” is displayed “RECALL” will appear on the display.
  • Rotate either the Time Adjustment Knob (D) or Speed Adjustment Knob (E) until “PROG” appears on the display
  • Quick press either the Time Adjustment Knob (D) or Speed Adjustment Knob (E) to access the Program menu and Quick Press to select an option
  • Run program
    • Navigate to the User Program submenu (“PROG”)
    • Navigate to the Run option
    • Navigate existing User Programs
    • Press and hold the Speed Adjustment Knob (E) until the unit beeps and the Run Status Indicator (C, Figure 1) illuminates
    • NOTE: While a program is running, the end user cannot adjust the speed or time settings.
  • To stop a program, press and hold the Speed Adjustment Knob (E) until the unit beeps and the Run Status Indicator (C) turns off or turn off the power switch
  • Create a New User Program
    • Navigate to the User Program submenu (“PROG”)
    • Select the Edit option
    • Select a new program (“Edit PrGn”)
    • Select new step (“PrG<X> StPn”)
    • Adjust Hours parameter
    • Quick press to select the Minutes parameter
    • Adjust Minutes parameter
    • Quick press to select the RPM parameter
    • Adjust RPM parameter
    • Quick press to confirm step parameters
    • Rotate either knob to add a new step (“PrG<X> StPn”) to the program
    • Repeat the above steps to set Hours, Minutes, Speed
    • To edit an existing step while creating a new program, rotate either knob and select an existing step to further adjust following the above steps
    • Select Back to complete program creation and save the program
  • Edit saved program
    • Navigate to the User Program submenu (“PROG”)
    • Select the Edit option
    • Select a program to be edited (“Edit PrG<X>”)
    • Select a new step (“PrG<X> StPn”) to add a step to a program or select the existing step to be edited (“PrG<X>” “StP<Y>”)
    • Adjust step parameters
    • Select Back to complete the program edit and save the program
  • Clear program step
    • Navigate to the User Program submenu (“PROG”)
    • Select the Clear (“CLr”) option
    • Select the appropriate program (“Edit PrG<X>”)
    • Select the step to be cleared (“PrG<X>” “StP<Y>”)
    • Select the “yes” option to verify a clear request
  • Clear program
    • Navigate to the User Program submenu (“PROG”)
    • Select the Clear (“CLr”) option
    • Select the appropriate program (“Edit PrG<X>”)
    • Select the ALL option (“PrG<X>” “ALL”)
    • Select the “yes” option to verify a clear request

Menu – System Settings

Pause Enable/Disable

  • Navigate to the System Settings submenu (“SYS”)
  • Navigate to the Pause setting (“PAUS”)
  • Quick press to select a value
  • Rotate the knob to select the desired setting (En = Enabled or dIS = Disabled)
  • Quick press to confirm the value

Beeper Enable/Disable

  • Disabling the Beeper will silence and prevent beeps in the following scenarios:
    • Starting and stopping shaking
    • When the timer reaches 00:00 in timer countdown mode
  • Navigate to the System Settings submenu (“SYS”)
  • Navigate to the Pause setting (“BEEP”)
  • Quick press to select a value (En = Enabled or dIS = Disabled)
  • Rotate the knob to select the desired setting
  • Quick press to confirm the value

Power Recovery Enable/Disable

  • Power Recovery is an optional feature that allows the unit to automatically restart the shaking functions when power is returned to the unit after a disconnect.
  • Navigate to the System Settings submenu (“SYS”)
  • Navigate to the Power Recovery setting (“PWr”)
  • Quick press to select a value (En = Enabled or dIS = Disabled)
  • Rotate the knob to select the desired setting
  • Quick press to confirm the valued

Overload Detection Enable / Disable

  • Optional load sensing feature that protects improper positioning and excess load conditions.
  • The unit will automatically slow to a safe operating speed and display “E4” if a hazardous load is detected. The error may be cleared by interacting with the unit; shake and timer functions will continue operating as standard.
  • Navigate to the System Settings submenu (“SYS”)
  • Navigate to the Power Recovery setting (“LOAD”)
  • Quick press to select a value (En = Enabled or dIS = Disabled)
  • Rotate the knob to select the desired setting
  • Quick press to confirm the valued

Display Settings

  • Adjust LCD brightness and configure the display timeout feature, which dims the LCD to set brightness after a selected period of idle time.
  • Navigate to the System Settings submenu (“SYS”)
  • Navigate to the Power Recovery setting (“dISP”)
  • Adjust Backlight Brightness
    • Adjust the brightness percentage (“bL P”)
    • Range: 0-100 %
    • Quick press to select the backlight brightness percentage value
    • Rotate the knob to select the desired setting
    • Quick press to confirm the value
  • Backlight Timeout Enable/Disable
    • Quick press to select a value (“beta”)
    • Rotate the knob to select the desired setting (En = Enabled or dIS = Disabled)
    • Quick press to confirm the value
  • When Backlight Timeout Brightness is Enabled, adjust Backlight Timeout Period
    • Quick press to select value (“tO t”)
    • Range: 1-4 hours
    • Rotate the knob to select the desired setting (select the number of hours)
    • Quick press to confirm the value
  • Adjust backlight brightness while timeout is active:
    • Adjust the brightness percentage (“tO P”)
    • Range: 0-100 %
    • Quick press to select the backlight brightness percentage value
    • Rotate the knob to select the desired setting
    • Quick press to confirm value

Factory Reset

  • Resetting the unit to Factory Default Settings will do the following:
    • Clear all programs
    • Clear all recall parameters
    • Clears all System settings to the default value
  • Navigate to the System Settings submenu (“SYS”)
  • Navigate to the Reset setting (“rSt”)
  • Quick press to select value (no or yes)
  • Rotate the knob to select the desired setting
  • Quick press to confirm

RS232
RS-232 serial port provides two-way communications for data logging and unit control using a PC and a suitable application program.

  • Interface connections are chosen by EIA standard RS-232
  • Device Connector: RS-232 DB9 Female
  • Recommended Cables:
    • DB9 M/M Straight Through Serial Cable
    • USB-A to RS-232 DB9 Straight Through Serial Adapter Cable
  • Transmission Procedure
    • Asynchronous character transmission in start-stop mode
  • Transmission Type
    • Full Duplex
  • Character Format
    • Start Bit(s): 1
    • Character Bits: 8
    • Parity Bit(s): None
    • Stop Bit(s): 1
  • Transmission Speed (Baud Rate): 9600
  • Data Flow Control: Xon/Xoff
  • Syntax
    • Instructions and parameters separated by space (0x20)
    • CR LF termination (0x0D, 0x0A)
    • Max length: 80 characters
  • ‘<command> A’ returned if the command is recognized; ‘L’ returned otherwise.

RS232 Command Set

ID <xxxx> Set ID

1 ≤ xxxx ≤ 9999

ID Read ID value
MODE Read more:
0: idle
1: shake
2: paused
99: error
START_SHAKE Start shake function and timer
PAUSE_SHAKE Pause shake function and timer
STOP_SHAKE Stop the shake function; reset the timer
TARGET_SPEED <xxxx> Set the target speed value
TARGET_SPEED Read target speed value
MEASURED_SPEED Read measured speed value
TIMER Read the current timer value
TIMER 0 Set Timer Mode = Count Up
 

TIMER <hh>:<mm>:<ss>

Set Timer Mode = Count Down;
Timer = hh:mm: ss
TIMER RESET Reset timer to set value; timer continues counting.
No change to the shake function.
LOCK Lock user interface
UNLOCK Unlock user interface
PARAM <xxxx> Enable output of a comma-separated list of parameters, formatted as follows:

 

<TIMER [hh:mm:ss]>, <ID>, <MODE>, <TARGET SPEED>, <MEASURED SPEED>, <ERROR CODE>,

 

Output can be periodic, where xxxx represents the desired time interval: xxxx = 0

Single output
1 ≤ xxxx ≤ 9999
Periodic output every xxxx seconds

MAINTENANCE

The Light Duty/Microplate Shaker is built for long, trouble-free, dependable service. No lubrication or other technical user maintenance is required. It needs no user maintenance beyond keeping the unit clean. Always ensure the power is disconnected from the unit before any cleaning. If the unit ever requires service, contact your Ohaus representative.

The light-duty/Microplate Shaker should be given the care normally required for any electrical appliance. At least every three (3) months you should:

  • Unplug the unit.
  • Remove any accumulated dirt from the work surface and tray.
  • Check all accessory items to make sure they are properly tightened.

Attention
Do not use solvents, harsh chemicals, ammonia, or abrasive cleaning agents The housing may be cleaned with a cloth dampened with a mild detergent if necessary.

Avoid wetting or unnecessary exposure to fumes. Spills should be removed promptly after the unit has cooled down. Before using any cleaning or decontamination method except as noted in this section, users should check with the manufacturer that the proposed method will not damage the equipment. The user is responsible for carrying out appropriate decontamination if hazardous material is spilled onto or into the equipment.

Troubleshooting

  • During operation, any rattling or ticking sounds may indicate a loose screw on the tray, a tray attachment, or an accessory. All accessories should be sufficiently tightened in place before starting the unit.
  • The following table lists error codes associated with common problems and possible causes and remedies. If the problem persists, contact OHAUS or your authorized dealer.
Error* Cause of Error How to Fix
E3 Speed Error
no/low tray speed, excess motor speed
Broken drive belt, malfunctioning speed sensor, seized bearing, mechanical obstruction, tray overload.

Reset the power switch to clear this error. Check for mechanical obstructions.

If the E3 error persists, remove power from the unit and contact an Ohaus representative for repair. The end user should NOT attempt repair.

E4 Load Error
Uneven/excessive tray loading, high vibration, motor overload
Uneven/excessive loading, loose suction cup foot*, mechanical obstruction

Toggle the rocker switch to clear this error. Reduction of load / even load distribution may resolve this error. Alternatively, disabling the Overload Detection feature may resolve this fault, please see the Instruction Manual for entering the Menu and disabling this feature.

If the E4 error persists, remove power from the unit and contact an Ohaus representative for repair. The end user should NOT attempt repair.

In the event a foot (suction cup) has come loose from the bench top, the unit may register an errant E4 error message due to the instability of the unit. Reset the power switch to clear this error. Firmly press down on the four (4) corners of the unit, creating a strong suction to the work surface (do not place on bench mat).

Service Information
If the troubleshooting section does not resolve or describe your problem, contact your authorized OHAUS service agent. For service assistance or technical support in the United States call toll-free 1-800-672-7722 ext. 7852 between 8:00 AM and 5:00 PM EST. An OHAUS product service specialist will be available to assist. Outside the USA, please visit our website, www.ohaus.com to locate the Ohaus office nearest you.

  • Serial Number: __________________________
  • Date of Purchase: __________________________
  • Supplier: __________________________

TECHNICAL DATA

Equipment Ratings:

  • Indoor use only
  • Altitude: 0 to 2000m
  • Operating temperature: -10⁰C to 40°C
  • Storage temperature: -20 to 65°C
  • Operating Humidity: 20 to 80% relative humidity, non-condensing
  • Storage Humidity: 20 to 80% relative humidity, non-condensing
  • Electrical Supply: 24VDC, 1.25A. (For use with certified or approved power supply, which must have a SELV and limited energy output.).
  • Voltage fluctuations: Mains supply voltage fluctuations up to ±10% of the nominal voltage.
  • Overvoltage category (Installation category): II
  • Pollution degree: 2
  • Avoid cold starts. The unit is not designed to start after being in a cold room environment. Bring the unit into the cold room from a room temperature environment, operate and remove the unit from the cold room as soon as the operation is complete

COMPLIANCE

Compliance with the following standards is indicated by the corresponding mark on the product.

OHAUS-Endeavor-5000-Series-Light-Duty-Shakers-fig- (18)

Global Notice

Warning:
This is a Class B product. In a domestic environment, this product may cause radio interference in which case the user may be required to take adequate measures.

ISED Canada Compliance Statement:
CAN ICES-003(B) / NMB-003(B) FCC Notice

ISO 9001 Registration
The management system governing the production of this product is ISO 9001 certified.

FCC Supplier Declaration of Conformity

  • Unintentional Radiator per 47CFR Part B
  • Trade Name: OHAUS CORPORATION
  • Model: E51

Party issuing Supplier’s Declaration of Conformity

  • Ohaus Instruments (Changzhou) Co., Ltd.
  • Building C, No. 6 Zhengqiang Road, Xuejia Town, Xinbei District, Changzhou Jiangsu 213125 China
  • Phone: +86 519 85287270

Responsible Party – U.S. Contact Information

  • Ohaus Corporation 8 Campus Drive, Ste. 105 Parsippany, NJ 07054 United States
  • Phone: +1 973 377 9000
  • Web: www.ohaus.com.

FCC Compliance Statement:

Note:
This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used by the instructions may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and the receiver.
  • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

LIMITED WARRANTY

OHAUS products are warranted against defects in materials and workmanship from the date of delivery through the duration of the warranty period. During the warranty period OHAUS will repair, or, at its option, replace any component(s) that proves to be defective at no charge, provided that the product is returned, freight prepaid, to OHAUS.

This warranty does not apply if the product has been damaged by accident or misuse, exposed to radioactive or corrosive materials, has foreign material penetrating to the inside of the product, or as a result of service or modification by other than OHAUS. Instead of a properly returned warranty registration card, the warranty period shall begin on the date of shipment to the authorized dealer. No other express or implied warranty is given by OHAUS Corporation. OHAUS Corporation shall not be liable for any consequential damages.

As warranty legislation differs from state to state and country to country, please contact OHAUS or your local OHAUS dealer for further details.

  • Ohaus Corporation 8 Campus Drive Suite 105 Parsippany, NJ 07054 USA
  • Tel: +1 973 377 9000
  • Fax: +1 973 944 7177
  • With offices worldwide www.ohaus.com.

P/N 30770900 A © 2023 Ohaus Corporation, all rights reserved.

Documents / Resources

OHAUS Endeavor 5000 Series Light Duty Shakers [pdf] Instruction Manual
Endeavor 5000 Series Light Duty Shakers, Endeavor 5000, Series Light Duty Shakers, Light Duty Shakers, Duty Shakers, Shakers

References

Leave a comment

Your email address will not be published. Required fields are marked *