neo GAS-5BURN-BBQ 5 Burner (4+1) Gas BBQ with Gas Regulator Kit and Rain Cover
Product Information
- Product Name: Neo 5 Burner (4+1) Gas BBQ with Gas Regulator Kit & Rain Cover
- Model Number: GAS-5BURN-BBQ
- Manufacturer: Neo Direct
- Contact Information:
- Email: support@neodirect.com
- Telephone: 01133 502 501
Product Usage Instructions
Safety Instructions
- Read the instruction manual carefully before use and keep for future reference. Failure to comply with the instructions can result in death, serious injury, or property damage.
- For outdoor use ONLY! Do not use indoors.
- Do not use below ground level.
- The accessible parts can get very hot. Keep small children away from the product during use.
Parts List
Please refer to page 2 of the instruction manual for a detailed list of parts.
Assembly Instructions
- Assemble the left side and right side frame (5 & 6) to the bottom shelf (7) using 4pcs M5 screws (B).
- Assemble the back shelf (9) to the frames using 4pcs M5 screws (B).
- Assemble the front beam (8) to the front of frames using 4pcs M5 screws (B).
- Attach the 4pcs wheels (10 & 11) to the end of frame legs.
Note that the 2pcs wheels with brakes (10) should always be on the same side. - Slide the body (1) into the frame legs. Ensure that all 8pcs pre-assembled M5 screws are in place before sliding. Tighten the screws after the body is in position. Fix the thermometer (23) to the lid using its own screw.
- Assemble the right side shelf (14) to the body using 6pcs M5 screws (B).
- Assemble the left side shelf (15) to the body using 6pcs M5 screws (B).
- Assemble the side burner rotary switch base (16), side burner front plate, and side burner valve (inside shelf front plate) together using 2pcs M4 countersunk screws (A).
- Assemble the side burner (18) into the side burner shelf using 2pcs M4 screws (A). Insert the tube into the valve connector.
- Attach one end of the ignition (19) to the side burner shelf using 1pc M4 screw (A) and 1pc M4 nut (D). Assemble the other end to the valve connector.
- Make sure the ignition needle’s head is directed at one of the side burner’s gas holes for successful lighting.
- Assemble the decorated knob (17) to the side burner’s front plate. Place the grate (20) on the side burner shelf, with 3 legs slotting into the holes.
- Attach the handles (13) to the front doors (12) using 4pcs M4 screws (A).
- Assemble the doors to the frames’ front legs using top and bottom pins (C & E).
- Fix the warming grid (2), cooking grids (3), and heat tents (4) into the body.
- Assemble the oil cup (21) to the oil pan.
- Tighten all screws before use. Assembly is now completed.
PARTS
PART LIST
| No. | Pic. | Qty | No. | Pic. | Qty |
| 1 |  |
1 | 17 |  |
1 |
| 2 |  |
1 | 18 |  |
1 |
| 3 |  |
2 | 19 |  |
1 |
| 4 |  |
4 | 20 |  |
1 |
| 5 |  |
1 | 21 |  |
1 |
| 6 |  |
1 | 22 |  |
2 |
| 7 |  |
1 | 23 |  |
1 |
| 8 |  |
1 | A M4 *8 screw |
 |
9 |
| 9 |  |
1 | B M5*12 screw |
 |
24 |
| 10 |  |
2 | C Top door pin |
 |
2 |
| 11 |  |
2 | D M4*nut |
 |
1 |
|
12 |
 |
2 |
E Bottom door pin |
 |
2 |
| 13 |  |
2 | F M3*nut |
 |
2 |
| 14 |  |
1 | G M3*10 screw |
 |
2 |
| 15 |  |
1 | H M3*10 self-tap screw |
 |
2 |
| 16 |  |
1 |
SAFETY INSTRUCTIONS
- Read the instruction manual carefully before use and keep for future reference. Failure to comply with the instructions can result in death, serious injury or property damage.
- For outdoor use ONLY! Do not use indoors.
- Do not use below ground level.
- The accessible parts can get very hot. Keep small children, elderly people and animals away from the gas grill. The use of a grill glove is advised.
- Do not move the product while it is alight or hot, wait for the product to cool down fully before moving.
- Turn off the gas supply at the gas cylinder when the grill is not in use or after use.
- Any modification of the product, misuse or failure to follow the instructions may be dangerous and will void the warranty.
- Check your gas grill annually for any leaks. Check whether the hose connections are tight and leak test them each time you reconnect the gas cylinder.
- Do not use the gas grill within 1 meter of combustible materials or surfaces.
- LP gas cylinders should not be placed directly underneath the grill.
- Open the hook of the grill before lighting.
- Do not leave the grill unattended when it is lit.
- Be careful when opening the hook, as the hot steam inside is released upon opening.
- Do not cover the grill until it has completely cooled down.
- Do not use aerosols near the grill.
- Do not store or use petrol or other flammable vapors or liquids in the vicinity of this gas grill or any other appliance.
- If you smell gas, turn off the gas supply at the gas cylinder; extinguish any open flame; open the hood. Stop using immediately.
Assembly
Note: Please do not tighten the screws and nuts until all assembly steps are completed.
- Assemble the left side and right side frame (5&6) to the bottom shelf (7) with 4pcs M5 screws (B).
- Assemble the back shelf (9) to the frames with 4 pcs M5 screws (B).
- Assemble the front beam (8) to the front of frames with 4pcs M5 screws (B).
- Assemble the 4pcs wheels (10&11) to the end of frame legs.
Please note: the 2pcs wheels with breaks (10) will always be on the same side.
- The body (1) will slide into the frame legs with 8 pcs pre-assembled M5 screws (See detailed pic.).
- Tighten the screws after the body is in position.
- Thermometer (23) is fixed to the lid using its own screw.
- Make sure all 8pcs screws are pre-assembled before sliding.
- Right side shelf (14) is assembled to the body with 6 pcs M5 screws (B).
- Left side shelf (15) is assembled to the body with 6 pcs M5 screws (B).
- Side burner rotary switch base (16), side burner front plate and side burner valve (inside shelf front plate) are assembled together with 2pcs M4 countersunk screws (A).
- Side burner (18) is assembled into the side burner shelf with 2 pcs M4 screws (A). Insert the tube to valve connector.
- One end of ignition (19) is assembled to the side burner shelf with 1pc M4 screw (A) and 1pc M4 nut (D). The other end is assembled to the valve connector.
NOTICE
In order to succeed in lighting the side burner’s, make sure the ignition needle’s head is direct at one of the side burner’s gas holes.
- One end of ignition (19) is assembled to the side burner shelf with 1pc M4 screw (A) and 1pc M4 nut (D). The other end is assembled to the valve connector.
- Decorated knob (17) is assembled to side burner’s front plate. Grate (20) is putted on side burner shelf, with 3 legs slotting into the holes.
- Handles (13) are assembled to front doors (12) with 4pcs M4 screws (A).
- Doors are assembled to the frames’ front legs with top and bottom pins (C&E).
- Warming grid (2), cooking grids (3) and heat tents (4) are fixed into the body.
- Oil cup (21) is assembled to the oil pan.
Tighten all screws before use Assembly completed
For any issues please feel free to contact us, we are always happy to help.
Email: support@neodirect.com
Telephone: 01133 502 501
Documents / Resources
 |
neo GAS-5BURN-BBQ 5 Burner (4+1) Gas BBQ with Gas Regulator Kit and Rain Cover [pdf] Instruction Manual GAS-5BURN-BBQ 5 Burner 4 1 Gas BBQ with Gas Regulator Kit and Rain Cover, GAS-5BURN-BBQ, 5 Burner 4 1 Gas BBQ with Gas Regulator Kit and Rain Cover, Gas Regulator Kit and Rain Cover, Kit and Rain Cover, Rain Cover |
