Einhell GE-CR 30 Li Cordless Tiller Cultivator Instruction Manual

Do not operate the tiller/cultivator when tired, or under the influence of drugs, alcohol, or medication.
Store the equipment indoors in dry places out of reach of children.

Follow the manufacturer’s instructions for lubricating and changing accessories.
Keep handles dry, clean, and free from oil and grease.

FAQs

Q: Can I use the cordless tiller/cultivator in wet conditions?

A: No, it is not recommended to use the equipment in damp locations to avoid the risk of electric shock and injury.

Q: What should I do before carrying out maintenance work?

A: Always remember to pull out the safety plug before conducting any maintenance, cleaning, or repair tasks to ensure safety.

Q: Is it necessary to wear protective gear while using the cordless tiller/cultivator?

A: Yes, it is advised to wear goggles and ear protection to prevent any potential injuries while operating the equipment.

Symbol

Danger! – Read the operating instructions to reduce the risk of injury.

Danger! Never use the equipment in damp locations.
Caution! Danger from catapulted parts; keep a safe distance.

Danger! Rotating Tines. Keep hands and feet away from rotating tines. Rotating tines will cause injury.
Caution! Wear goggles and ear protection.

Danger! Pull the safety plug out before carrying out maintenance, cleaning, and repair work.
Store the batteries only in dry rooms with an ambient temperature of 50°F to 104°F (+10°C to +40°C). Place only fully charged batteries in storage (charged at least 40%).

DANGER!

When using the equipment, many safety precautions must be observed to avoid injuries and damage. Please read the complete operating instructions and safety information with due care.
Keep these operating instructions in a safe place so that the information is available at all times. If you give the equipment to any other person, hand over these operating instructions and the safety information as well.
We cannot accept any liability for damage or accidents that arise due to failure to follow these instructions and the safety information.

Safety information

Read All Instructions

WARNING: When using electric gardening appliances, basic safety precautions should always be followed to reduce the risk of ﬁ re, electric shock, and personal injury, including the following Keep hands away from blades.

FOR ALL APPLIANCES

Avoid dangerous environments – do not use appliances in damp locations.
Don’t use it in the rain.
Keep children away – all people and pets should be kept at a distance from the work area.
Dress properly – do not wear loose clothing or jewelry. They can be caught in moving parts. Wear protective clothing; use of work gloves, long pants, a long-sleeved shirt, and safety footwear is recommended when working outdoors.
Wear a protective hair covering to contain long hair.
Use safety glasses – always use a face or dust mask if the area in which you are working is dusty. The purpose of the safety rules is to attract your attention to possible dangers. The safety symbols and the explanations with them, require your careful attention and understanding. The safety warnings do not by themselves eliminate any danger. The instructions or warnings they give are not substitutes for proper accident prevention measures.
Use the right appliance – do not use an appliance for any job except that for which it is intended.
Do not force the appliance – it will do the job better and with less likelihood of a risk of injury at the rate for which it was designed.

Do not overreach – keep proper footing and balance at all times.
Stay alert. Use common sense. Do not operate appliance when you are tired or under the influence of drugs, alcohol or medication.
When not in use, appliances should be stored indoors in dry places out of reach of children.

Maintain appliance with care. Follow instructions for lubricating and changing accessories. Keep handles dry, clean, and free from oil and grease.
Check damaged parts. Before using the appliance, make sure the safety guards are intact. Never use a tool without its safety guard. Check the alignment of the moving parts, the binding of the moving parts.
Check for broken or defective parts that can affect the safe operation of your tool. A guard or other part that is damaged should be properly repaired or replaced by an authorized service centre unless indicated elsewhere in this manual.

Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack.
Use appliances only with specifically designated battery packs. Use of any other battery packs may create a risk of injury and fire.
When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects, that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire.

Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns. (This advice is considered correct for conventional NiMh, NiCd, lead acid and Lithium-ion cell types. If this advice is incorrect for a cell design that differs from these, then the correct advice may be substituted.)
Do not use a battery pack or appliance that is damaged or modified. Damaged or modified batteries may exhibit unpredictable behavior resulting in fire, explosion or risk of injury.
Do not expose a battery pack or appliance to fire or excessive temperature. Exposure to fire or temperature above 266°F (130°C) may cause explosion.
Follow all charging instructions and do not charge the battery pack or appliance outside of the temperature range specified in the instructions.

Charging improperly or at temperatures outside of the specified range may damage the battery and increase the risk of fire.
Have servicing performed by a qualified repair person using only identical replacement parts. This will ensure that the safety of the product is maintained.
Do not modify or attempt to repair the appliance or the battery pack (as applicable) except as indicated in the instructions for use and care.

FOR ALL BATTERY-OPERATED APPLIANCES:
- Do not charge appliance in rain, or in wet locations.
- Do not use battery-operated appliances in the rain. Always remove or disconnect the battery pack before adjusting, cleaning, servicing or transporting the garden appliances.

FOR ALL BATTERY-OPERATED PRODUCTS EMPLOYING A DETACHABLE OR SEPARABLE BATTERY:
- Use only the following type and size battery: 18V 1.5Ah PXC Lithium-ion battery
- 18V 2.0Ah PXC Lithium-ion battery
- 18V 2.5Ah PXC Lithium-ion battery
- 18V 3.0Ah PXC Lithium-ion battery
- 18V 4.0Ah PXC Lithium-ion battery
- 18V 3.0Ah PXC Plus Lithium-ion battery 18V 4.0Ah PXC Plus Lithium-ion battery 18V 5.2Ah PXC Plus Lithium-ion battery 18V 4.0Ah/6.0Ah PXC Plus Lithium-ion battery
- 18V 5.0Ah/8.0Ah PXC Plus Lithium-ion battery
- Do not dispose of the battery in a fire. The cell may explode. Check with local codes for possible special disposal instructions.
- Do not open or mutilate the battery. Released electrolyte is corrosive and may cause damage to the eyes or skin. It may be toxic if swallowed.
- Exercise care in handling the battery in order not to short it with conducting materials such as rings, bracelets, and keys. The battery or conductor may overheat and cause burns.
AVOID UNINTENTIONAL STARTING – DO NOT INSERT THE BATTERY WHILE YOUR FINGER IS ON THE SWITCH. BE SURE THE SWITCH IS OFF WHEN INSERTING THE BATTERY.

GENERAL SAFETY WARNINGS FOR THE BATTERY PACK

Dispose of used battery promptly and properly. When disposing of secondary cells or batteries, keep cells or batteries of different electrochemical systems separate from each other.
Keep battery out of reach of children and in original package until ready to use. Never put batteries in one’s mouth. If swallowed, contact local poison control centre immediately.

CAUTION – The battery used in this device may present a risk of fire or chemical burn if mishandled. Replace battery with Einhell/lawn master brand only. Use of another battery may present a risk of fire or explosion.
WARNING: Do not use a visibly damaged battery pack or appliance.
WARNING: Do not modify or attempt to repair the appliance or the battery pack.

BATTERIES MUST BE RECYCLED

Do not short-circuit a cell or battery. Do not store cells or batteries haphazardly in a box or drawer where they may short-circuit each other or be short-circuited by conductive materials.
Do not subject cells or batteries to mechanical shocks.

Keep cells and batteries clean and dry. Wipe the cell or battery terminals with a clean dry cloth if they become dirty.
Do not maintain secondary cells and batteries on charge when not in use.
Retain the original cell and battery. Do not use any charger other than that specifically provided for use with the equipment. Secondary cells and batteries need to be charged before use. Always use the correct charger and refer to the manufacturer’s instructions or equipment manual for proper charging instructions.

When possible, remove the battery from the equipment when not in use.
Prevent unintentional starting. Ensure the switch is in the off-position before connecting to the battery pack, picking up or carrying the appliance. Carrying the appliance with your finger on the switch or energizing appliances that have the switch on invites accidents.
Disconnect the battery pack from the appliance before making any adjustments, changing accessories, or storing appliance. Such preventive safety measures reduce the risk of starting the appliance accidentally.

Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns.
Have servicing performed by a qualified repair person using only identical replacement parts. This will ensure that the safety of the product is maintained.
Protect your rechargeable battery against moisture, rain and high humidity. Moisture, rain and high humidity can cause dangerous cell damage. Never charge or work with batteries which have been exposed to moisture, rain or high humidity – replace them immediately.
If your equipment is fitted with a detachable battery, remove the battery for safety reasons after you have finished your work.

IMPORTANT SAFETY INSTRUCTIONS FOR CHARGER

WARNING: This product may contain lead, phthalate or other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. Please wash your hands after use.

Special safety information

Preliminary measures

Always wear sturdy, non-slip footwear and long trousers when using the machine. Never use the machine barefoot or in sandals.
Check all the ground on which the machine will be used and remove all objects that could be caught up and violently flung out by it.
Before using the machine, always visually examine the tools for excessive wear or damage. To prevent any imbalance, replace worn out or damaged parts and mounting bolts as a set only.

Make sure that all nuts, bolts and screws are tightened securely and that the machine is in safe working condition.

Handling

Only use the machine in broad daylight or in well-lit conditions.

Always maintain good footing on inclines.
Only operate the machine at a walking pace.
Work perpendicular to the slope, never up or down it.

Be particularly careful when you change direction on a slope.
Do not work on overly steep inclines.
Be particularly careful when you turn the machine around or pull it toward yourself. Switch on the motor carefully as described in the instructions from the manufacturer and ensure that you keep your feet at a safe distance from the tool.

Never move your hands or feet toward or under any rotating parts.
Never lift or carry a machine whilst the motor is running; in addition the safety plug should be pulled out.
Switch the motor off whenever leaving the machine.

If the machine begins to experience unusual vibrations, switch it off immediately and check it.

Maintenance and storage

Make sure that all nuts, bolts and screws are tightened securely at all times to ensure that the machine is in safe working condition.

Allow the engine to cool down before you put the machine in an enclosed area.
For safety reasons, replace worn or damaged parts.
Always switch the machine off and unplug the safety plug before making any adjustments or cleaning it.

Switch off the engine and pull the safety plug out:
Before you dislodge any blockages or clogs.
Before you clean the machine, inspect it or carry out work on the machine.

After you have traveled over an obstacle.
If you have struck a foreign object.
If the equipment begins to experience exceptionally strong vibrations.

Do not touch the tines before the tines have come to a complete stop and the safety plug has been pulled out.
SAVE THESE INSTRUCTIONS

Layout and items supplied

Layout

Top push bar
Bottom push bar
Motor unit

Cultivator tines
Safety plug
Two-hand safety switch

Cable securing clip
Lock knob
Screw

Transport wheel
Wheel cap
Brake shoe

Safety split pin
Pin
Axle screw

Washer
Lug
Two-point switch

Selector lever
Locking pin
Battery cover

Battery pack (not supplied)
Pushlock button
Battery capacity indicator

Battery capacity indicator button

Items supplied

Please check that the article is complete as speciﬁ ed in the scope of delivery.

If parts are missing, please contact our service center or the store where you made your purchase at the latest within 5 work days after purchasing the article and upon presentation of a valid bill of purchase.
Open the packaging and take out the equipment with care.
Remove the packaging material and any packaging and/or transportation braces (if present).
Check to see if all the items are supplied.
Inspect the equipment and accessories for transport damage.
If possible, keep the packaging until the end of the guarantee period.

Danger!

The equipment and packaging material are not toys. Do not let children play with plastic bags, plastic sheets and small parts. There is a risk of choking and suﬀ ocating!
Motor unit
Bottom push bar
Top push bar
Safety plug
Brake shoe
2x Cable securing clips
4x Lock knobs
4x Screws
2x Transport wheels
2x Wheel caps
Original operating instructions with safety information

Separately available accessories

18V 1.5Ah PXC Lithium-Ion battery
18V 2.0Ah PXC Lithium-Ion battery
18V 2.5Ah PXC Lithium-Ion battery
18V 3.0Ah PXC Lithium-Ion battery
18V 4.0Ah PXC Lithium-Ion battery
18V 3.0Ah PXC Plus Lithium-Ion battery
18V 4.0Ah PXC Plus Lithium-Ion battery
18V 5.2Ah PXC Plus Lithium-Ion battery
18V 4.0Ah/6.0Ah PXC Plus Lithium-Ion battery 18V 5.0Ah/8.0Ah PXC Plus Lithium-Ion battery 18V PXC Dual Port Fast Charger
18V PXC Fast Charger
Contact your local retailer for more speciﬁ c models of batteries and charger available in your area. You can also explore battery + charger options at Einhell.com.

Intended use

The machine is designed for digging soil (for example garden beds). Be sure to observe the restrictions in the safety information.
For safety reasons, the equipment may not be used as a drive unit for other work tools or tool sets of any kind.
The equipment is allowed to be used only for its prescribed purpose. Any other use is deemed to be a case of misuse. The user/operator and not the manufacturer will be liable for any damage or injuries of any kind resulting from such misuse.
Please note that our equipment has not been designed for use in commercial, trade or industrial applications. Our warranty will be voided if the equipment is used in commercial, trade or industrial businesses or for equivalent purposes.

Technical data

Motor power supply: ………….. 36V (2x 18V)
No load speed RPM: ………………………………. 140
Max. cultivating width: ………………………………12″
Max. cultivating depth: ………………………………..8″
Number of steel tines: ………………………………… 4
Weight (Tool only): ……………………………..18.7 lbs

Wear ear-muﬀ s.

The impact of noise can cause hearing damage.

Reduce noise generation and vibration to a minimum!

Use only equipment that is in perfect condition.
Maintain and clean the equipment regularly.
Adapt your way of working to the equipment.
Do not overload the equipment.
Have the equipment checked if necessary.
Switch off the equipment when not in use.
Wear gloves.

CAUTION! Residual risks

Even if you use this electric power tool by the instructions, certain residual risks cannot be eliminated. The following hazards may arise in connection with the equipment‘s construction and layout:

Lung damage if no suitable protective dust mask is used.
Damage to hearing if no suitable ear protection is applied.
Health damage is caused by hand-arm vibrations if the equipment is used over a longer period or is not properly guided and maintained.

Before starting the equipment

Warning!

Always pull out the safety plug before making adjustments or carrying out maintenance, cleaning, and repair work on the equipment.

Assembly (Fig. 3-9)

Pull out the split pin (Fig. 3/Item 13) and remove the pin (Fig. 3/Item 14). Push the brake shoe (Fig. 4/Item 12) into the mount and fix it in position with the pin and split pin previously removed.
Undo the axle screws (Fig. 4/Item 15) with washers on both sides of the axle. On both sides, push the transport wheel as shown in Fig. 5 onto the axle and secure with the axle screws (15) and washers (Fig. 5/Item 16) on each side.
Press the wheel caps (Fig. 6/Item 11) onto the transport wheels.
Push the lower push bar onto the motor unit (Fig. 7/Item 3) as shown in Fig. 7 and fasten it with the screws (Fig. 7/Item 9) and the lock knobs (Fig. 7/Item 8).
Push the upper push bar (Fig. 8/Item 1) onto the lower push bar (Fig. 8/Item 2) and fasten it with the screws (Fig. 8/Item 9) and the lock knobs (Fig. 8/Item 8).
Secure the cable to the push bars with two cable-securing clips (Fig. 9/Item 7).

Installing the battery (Fig. 11-12)

Open the battery cover (21). This is done by pressing the lock release as shown in Fig. 11 and swinging up the cover. Then slot the two batteries into the mounts as shown in Fig. 12 and push them forward until you hear the batteries engage.

Important!

Use only batteries which are charged to the same level. Never combine full and half-full batteries.
Always charge the two batteries simultaneously.
The equipment’s operating time depends on the battery with the lower charge level. The two batteries must always be fully charged before use.
Close the battery cover by swinging it down, and make sure that it latches in place correctly.

Operation

Caution!

The device is equipped with a safety switch to prevent unauthorized use. Immediately before using the equipment, insert the safety plug (Fig. 13/Item 5). Remove the safety plug again when interrupting or terminating your work.
To do so, press the lug (Fig. 13/Item 17).
Danger! To prevent the equipment from being switched on unintentionally it comes with a two-point switch (Fig. 14/Item 18) on the push bar which must be pressed before the selector lever (Fig. 14/Item 19) can be pressed.
If the lever switch is released, the equipment switches off.
Repeat this process several times so that you are sure that your equipment functions properly.
Before you perform any repair or maintenance work on the equipment, make sure the cultivator tines are not rotating and that the safety plug is disconnected.
Before you start any work, the equipment must be moved into the working position.
First, press the locking pin (Fig. 15/Item 20) in the direction of the arrow as shown in Fig. 15, and swing the wheel unit up until the locking pin latches into position.
To convert the equipment to the transport position, proceed in reverse order.
Always make sure that a safe distance (provided by the long handles) is maintained between the machine and the user.
Be especially careful when changing direction on slopes and inclines. Maintain a solid footing and wear sturdy, non-slip footwear and long trousers.
Always work along the incline (not up and down).
Use special caution when backing up and pulling the equipment (tripping hazard)!

Tips for proper working

Place the machine in front of the area you wish to till and hold it securely on the push bar before you switch on the machine.
Guide the tiller tines over the area.
To achieve cleanly tilled soil always make sure that you guide the machine in straight lines wherever possible.
By doing this, the aeration swaths should always overlap each other by an inch or two (a few centimeters) to avoid bare strips.
Switch off the motor promptly when you arrive at the end of the area you wish to till. The motor must be switched off when you raise the machine (for example to change direction).
Keep the underside of the machine clean and remove soil deposits. Deposits make it more diffi cult to start the machine and decrease the working depth.
Work perpendicular to the slop on inclined areas.
The machine must be switched off and the safety plug pulled out before you make any checks on the cultivator tines.

Warning!

The tiller tines will continue to rotate for a few seconds after the motor is switched off. Never attempt to manually stop them.
If the rotating tiller tines strike an object, immediately switch off the machine and wait for the tiller tines to come to a complete stop. Then inspect the condition of the tiller tines. Replace any parts that are damaged.

Charging the Lithium-Ion battery (not included)

The corresponding instructions can be found in the original operating instructions for your charger.

Battery capacity indicator (Fig. 10 / item 24)

Press the battery capacity indicator switch (25).
The battery capacity indicator (24) shows the charge status of the battery using 3 LEDs.
All 3 LEDs lit: The battery is fully charged 2 or 1 LED(s) lit:
The battery has an adequate remaining charge.

LED flashing:

The battery is empty, recharge the battery.

All LEDs flashing:

The temperature of the battery is too low. Remove the battery from the device and leave it at room temperature for a day.
If the error occurs again, this means that the battery has been completely discharged and is defective. Remove the battery from the device. Never use or charge a defective battery.

Cleaning and maintenance

HAZARD!

Always pull out the safety plug before making adjustments or carrying out maintenance, cleaning, and repair work on the equipment.
Make sure that the tine shaft is not turning. Cleaning
Keep all safety devices, air vents, and motor housing free of dirt and dust as far as possible.
Wipe the equipment with a clean cloth or blow it down with compressed air at low pressure.
We recommend cleaning the equipment immediately each time after use.
Clean the equipment regularly with a damp cloth and some soft soap. Do not use cleaning agents or solvents; these may be aggressive to the plastic parts in the equipment.
Ensure that no water can get into the interior of the equipment. The ingress of water into an electric power tool increases the risk of an electric shock.

Replacing the cultivator tines

For safety reasons, we recommend having the tiller tines replaced by an authorized professional.

Warning!

Wear working gloves. Use only genuine spare parts since otherwise the function and safety of the machine cannot be guaranteed.

Maintenance

Make sure that all mounting components (i.e. screws, nuts, etc.) are always tightened so that the equipment can be safely operated at all times.
Store the equipment in a dry room. All the metal parts should be cleaned and then oiled to make sure that they provide a long life.
For the best results, clean the plastic parts of the machine with a brush or rag.
Do not use any solvents to remove dirt.
For space-saving storage undo the lock knobs (Fig. 7,8/Item 8) and fold the push bar together as shown in Fig. 16.
Make sure that you do not damage the cable. At the end of the season, perform a general inspection of the equipment and remove any deposits that may have accumulated.
At the start of each season, make sure that you check the condition of the machine. If repairs are necessary, please contact one of our customer service centers.

Disposal and recycling

The equipment is supplied in packaging to prevent it from being damaged in transit. The raw materials in this packaging can be reused or recycled. The equipment and its accessories are made of various types of material, such as metal and plastic.
Never place defective equipment in your household refuse. The equipment should be taken to a suitable collection center for proper disposal. If you do not know the whereabouts of such a collection point, you should ask your local council oﬃces.

Storage

Store the equipment and its accessories out of children‘s reach in a dark and dry place at above-freezing temperatures.
The ideal storage temperature is between 41°F and 86°F (5°C and 30°C). Keep the electric tool in its original packaging.
The reprinting or reproduction by any other means, in whole or in part, of documentation and papers accompanying the products is strictly subject to the express consent of Einhell Germany AG.
Subject to technical changes.

Troubleshooting guide

Problem

Possible cause

Solution

The motor does not start.

– Safety plug is not inserted.

The battery is not correctly inserted.

– Motor terminals or capacitor disconnected.

– Excessive working depth.

– Batteries are empty.

– Insert the safety plug (see 6.).

– Remove batteries and reinsert (see 5.).

– By customer service workshop.

– Reduce the working depth.

– Charge batteries (see 5.).

Motor performance drops.

– Soil too hard.

– Tine is heavily worn.

– Correct the working depth.

– Replace cultivator tines.

Important! For protection, the motor is equipped with a thermal switch that cuts out when the motor is overloaded and switches on again automatically after a short cooling period.
www.Einhell.com

Documents / Resources

Einhell GE-CR 30 Li Cordless Tiller Cultivator [pdf] Instruction Manual
GE-CR 30 Li Cordless Tiller Cultivator, GE-CR 30 Li, Cordless Tiller Cultivator, Tiller Cultivator

Einhell GE-CR 30 Li Cordless Tiller Cultivator Instruction Manual

Einhell GE-CR 30 Li Cordless Tiller Cultivator

Product Information

Product Usage Instructions

Symbol

Safety information

Special safety information

Layout and items supplied

Intended use

Technical data

Before starting the equipment

Assembly (Fig. 3-9)

Operation

Cleaning and maintenance

Troubleshooting guide

Documents / Resources

References

Leave a comment

Cancel reply