VEVOR logo

Forward Plate Compactor Gas Engine

VEVOR Forward Plate Compactor Gas EngineFORWARD PLATE COMPACTOR
OPERATING INSTRUCTION
FORWARD PLATECOMPACTOR

We continue to be committed to provide you tools with competitive price. “Save Half”, “Half Price” or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and doses not necessarily mean to cover all categories of tools offered by us. You are kindly reminded to verify carefully when you are placing an order with us if you are actually saving half in comparison with the top major brands.
Note: The instruction’s picture is for reference only, the specific product appearance and color are subject to the actual product!
NEED HELP? CONTACT USI
Have product questions? Need technical support? Please feel free to contact us:
VEVOR Forward Plate Compactor Gas Engine - icon https://www.vevor.com/support
This is the original instruction, please read all manual instructions carefully before operating VEVOR reserves a clear interpretation of our user manual. The appear- ance of the product shall be subject to the product you received. Please forgive us that we won’t inform you again if there are any technology or software updates on our product.
Warning WARNING
To reduce the risk of injury , all operators and maintenance personnel must read and understand these instructions before operating , changing accessories or performing maintenance on the equipment we produced . Al possible situations cannot be covered in
these instructions. Care must be exercised by everyone using, maintaining or work near this equipment.
warning 2 CAUTION
NO OIL IN ENGINE
VEVOR Forward Plate Compactor Gas Engine - icon1 Fill the engine with oil to the correct level before starting the engine.

INTRODUCTION

Thank you for your selection of our equipment.
We have taken care of the design, manufacture and testing of this product. Should service or spare parts be required, prompt and efficient service is available from our branches.
General Safety instructions for the Operation of Power Equipment. Our factory’s goal is to produce power equipment that helps the operator work safely and efficiently. The most important the safety device for this or any tool is the operator. Care and good judgment are the best protection against injury. All possible hazards cannot be covered here, but we have tried to highlight some of the important items, individuals should look for and obey Caution, Warning and Danger signs placed on equipment, and displayed in the workplace. Operators should read and follow safety instructions packed with each product.
Learn how each machine works. Even if you have previously used similar machines, carefully check out each machine before you use it .Get the “feel” of it and know its capabilties, limitations, potential hazards, how it operates, and how it stops.We have no duty if a person doesn’t operate as the instruction said.

APPLICATIONS

A plate compactor is the machine that compacts the ground and it intends to make the surface smooth, by transmitting vibration through a vibrating plate, which power generated from single motorin vibrator case This machine is suitable for making the ground surface smooth, such as leveling the soil and beaching, finishing the asphalt paving. Applications as followings:

Trench compaction Earth works
Road maintenance Landscaping
Brick paving Driveway toppings

Warning Warning for incorrect application and abuse
This machine is hard to move forward on a soil with much water (especially clay soil).It is not suitable for such an application.
This machine is difficult to level a the ground include big stones dueto insufficient compacting force. Plate compactor is mainly applied for compacting surface smooth and it is not effective for jobs that require heavy compaction. In case of compacting ground deeply into lower layer, it is recommended to use. Tamping Rammer, Vibrato Compactor and Vibration Rollerwhich compacting force is rather effective. Please use this compactor for compacting surface on soil, sediment, sand , beaching and asphalt. It is not recommended for use this machine for the other applications.

STRUCTURE

The upper part is made up of Power Source, Handle ,Belt Cover and Guard Hook which are fixed by Engine base. The Engine base is fixed on Vibrating Plate by Shock Absorbing Rubber.The lower partis made up of Vibrating Plate and Vibrator unit that has an Eccentric rotary shatt builtin. The power source is transmitted from the centrifugal clutch on the engine output shaft to the eccentric rotary shaft via V-belt.
The air-cooled single-cylinder engine amounts as the power source and Centrifugal Clutch is fixed on the engine output shaftPetrol Engine(2- cycle, 4. cycle) and Diesel Gasoline Engine can be mounted as to. Centrifugal Clutch engages by running up the engine and engine is reduced suitable number for compacting. The rotation of engine is transmitted from V-pulley integrated with Clutch drum to the Vibrator pulley through V-belt. Vibrator Pulley rotates Eccentric rotor shaft that is contained in Vibrator case. The generated vibration created from eccentric rotor is transmitted to Compaction with the weight of the machine making the compaction of the ground possible.

FUNCTIONS AND CONTROLS

Motor:
The motor is controlled by an ON/OFF switch or push button which is mounted on the motor below the fuel tank.
The motor speed is controlled by a remote throttle lever which is mounted on the machine handle.
Honda and Kama motors are fitted with an oil alert device that will stop the motor or prevent starting when the crankcase oil level falls below a safe level
Drive belt:
The tension of the drive belt is adjustable. Loosen the four nuts on the bolts which secure the motor to the base plate, Adjust the set screws which bear against the motor crankcase to achieve the required belt tension .Ensure that the four nuts and the set screw lock nuts are tightened after adjustment.

FOR SAFETY OPERATION

A This safety alert symbol identifies important safety messages throughout this manual and on the machine. When you see this symbol, carefully read the message that follows.
Your safety is at stake
Foreword:
It is important to read this manual carefully so that you will fully understand the operational characteristics and performance of the plate compactor, Proper maintenance procedures will ensure long life and top performance of the unit.
Safety:
This section outiines basic safety procedures that apply to the operation,maintenance, and adjustment of the plate compactor. This unitis designed as a powerful, productive machine that should be operated with respect and caution.
Misuse or carelessness can resultin serious injury or damage. or both. Safety precautions must be observed at all times.
Operator Qualifications:
Before operating this equipment, an individual should read this manual. Whenever possible, he should be shown how to operate the unit by an experienced operator. Inexperience is hazardous in operating any machine or attachment. Trial and error is not the way to become familiar with a piece of equipment. This is expensive, cuts equipment life ,and can create a machine that should not be left unattended when operating.
Starting Safety:
Warning Cauton

Protection required. Wear a hard hat, shatterproof glasses, steeltoed boots and other protective devices required by job conditions. Avoid jewelry or loose clothing. These many catch on controls or in moving parts and cause serious injury.
Starting Safety:
Warning Cauton
Poisonous fumes. Start and operate only in a well-ventilated area. Breathing exhaust gases can result in sickness or death
Servicing Safety:
Warning Cauton
Flammable liquid. Stop the engine and do not smoke or allow work in the immediate area when refueling. Fire or explosion could result from flames or spark.
Moving parts. Shut down the engine before performing Service or maintenance. Contact with moving parts can cause serious injury.Flighttemperature. Allow machine and engine to cool before performing service or maintenance.
Contact with hot components can cause serious bums.
Engine
See engine operations manual
SHUTDOWN EMERGENCY SHUTDOWN
Move the throttle lever to the “OFF” position and also tum the stop switch to “OFF”.
NORMAL SHUTDOWN
Move the throttle lever quickly from “ON” to “OFF” and run the engine for 3 to 5 minutes at low speed. After the engine cools, turn the stop switch to the “OFF” position , and Close the fuel shutoff valve.
HAZARDS AND RISKS
NEVER allow any person to operate the machine without adequate instruction
ENSURE all operators read,understand and follow the operating instructions SERIOUS INJURY could result from improper or careless use of this machine
Plate compactors are heavy units and should be positioned by two people of appropriate strength.
Using the lifting handles provided on the machine, along with correct lifting techniques
Warning HANICAL HAZARDS
DO NOT operate or refuel a petrol or diesel motor in a confined area without adequate ventilation.
CARBON MONOXIDE exhaust gases from intemal combustion motor-driven units can cause death in confined spaces.
Warning Nose Hazaros
EXCESSIVE NOISE can lead to temporary or permanent loss of hearing.
WEAR an approved hearing protection device to limit noise exposure. As required by Occupational Health and Safety regulations.
 PROTECTIVE CLOTHING
ALWAYSwear approved hearing protection when working in a confined work space. Protective goggles and a dust mask should be worn when working in a dusty environment. Protective clothing and footwear may also be desirable when working with hot mix bitumen.
Warning ADDITIONAL HAZARDS
Slip/Trip/Fall is a major cause of serious injury or death. Beware of uneven or slippery work surfaces.
Exercise care when working in the vicinity of unprotected holes or excavations.

OPERATION

GENERAL OPERATION
The machine is best suited to the compaction of bituminous and granular materials e.g. granular soils, gravels sands or mixtures of both. Cohesive soils such as silt and clay are best compacted using the impact force produced by a vibrating rammer
Where possible the site should be graded and leveled before commencing compaction.
Correct moisture content in soil is vital to proper compaction.Water acts as a lubricant to help slide soil particles together. Too little moisture means inadequate compaction; too much moisture leaves water-filed voids that weaken the soil’s load-bearing ability.
Use unleaded grade petrol and ensure that the fuel is free from contamination.
The vibratory motion provides a self-propeliing action. Position the handle at the opposite end of the machine to the vibrator.
Start the motor using the recoil starter. ( If the motor is fitted with an on/off switch this must first be turned to ON before starting.
For more information of starting and correct operating procedures of the motor, refer to the motor operation manual supplied with the unit.
Increase the motor speed to the maximum setting using the hand throttle lever, before commencing compacting.
The machine should be controlled by grasping the handle with both hands and applying restraint to control the for ward notion. If forward or backward motion has a problem, adjust the red handle or nuts (items 21, and 22 in the components list).Steer the machine by moving the handle sideways to the right or left.
ALWAYS maintain good footing so that you do not slip and lose control when starting or operating the machine.
7.1 PRIOR TO OPERATION
1-1. Make sure that all dirt, nut, etc., are thoroughly removed from the unit before operation. Special effort should be given to the button face of the vibrating plate and those areas adjacent to the cooling air inlet of an engine, carburetor, and air cleaner.
1-2. Check all bolts and screws for tightness and make sure all bolts and screws are securely tightened.
Loose bolts and screws may cause damage to the unit.
1-3. Check the V-belt for tightness. The normal slack should be approximately 10-15 mm (1/2″) when the belts are forcibly depressed in the middle position between the two sheaves.
If there is excess belt play. There could be a decrease in the impact force or erratic vibration, causing machine damage.
1-4. Check the engine oil level and if the engine oil lever is low, it should be refilled. Use the proper motor oil as suggested in the table below. (Fig-1)
1-5. Remove the oil plug in the vibrator assembly and check the oil level. Make sure the compactor is level when checking. The oil level should be up to the oil plug. Every month or every 200 hours of operation, replace the oil.

VEVOR Forward Plate Compactor Gas Engine - Fig1

Season Temperature Grad of Motor oil (higher than MS class)
Spring Summer or Autumn +120°F to +40°F SAE 30
Winter +40°F to +15° F SAE 20
Below +15° F SAE 10W-30

IMPORTION
Use the motor oil SAE
When changing the oil, the old oil can be drained by tipping the unit. The oil will drain easily while it is hot.
1-6. Regular grade gasoline should be used in the engine. When filling the fuel tank, make sure the fuel fiter is used.
7.2. CAUTION
2-1. Be careful with the operating place and ventilation. Avoid operating the machine in a closed room, tunnel, or other badly ventilated places, since its exhaust contains deadly poisonous carbon monoxide.
If the machine is employed unavoidable operated in such a place, discharge the exhaust out of the room by a suitable means.
2-2. Be careful with the hot members.
Mufflers and other hot members are dangerous. Do not touch them with an unprepared hand.
2-3.0bserve the following cautions when transporting. Clamp the fuel tank cap seaurely, and tum the fuel have OFF at the source during Drain gasoline from thefuel tank before transporting over a long distance oron rough roads.
2-4.Stop engine without fail before replenishing fuel tank.Never replenish gasoline while the engine is running or remains hot otherwise spilled or evaporated fuel is liable to catch fire from engine sparks or muffler heat.
Wipe off spilled fuel, if any, before starting engine. Be careful not to spill fuel.
2-5. Keep inflammable away from the vicinity of the exhaust port.
Be careful with gasoline match, straw and other inflammable, since the exhaust port is subjected to a high temperature.
7.3 STARTING
Ensure that the choke is closed, and start the throttle with a little bit. After the speed comes up, open the choke immediately and maintain it for about 10 seconds. Next, the throttle is slowly pushed to high speed, and the choke is kept open during this process.
Gasoline EngineVEVOR Forward Plate Compactor Gas Engine - Fig2 3-1. Turn the STOP SWITCH clock-wise to the position “P(ON) (Fig-3)
3-2.0pen the fuel cock. (Fig-4)
3-3. Set the speed control lever 1/3 to 1/2 of the way towards the high speed position. (Fig-5)
3-4. Close the choke lever.
If the engine is warm or the ambient temperature is high,open the choke lever half-way, or keep it fully open.
If the engine is cold or the ambient temperature is low, close the choke lever fully. (Fig-6)VEVOR Forward Plate Compactor Gas Engine - Fig3 3-5. Pull the starter handle slowly until resistance is felt. This is the “compression” point. Return the handle to its original position and pull swiftly.
Do not pull out the rope all the way.
After starter the engine, allow the starter handle to return to its original position while still holding the handle.(Fig-7) Diesel Engine
3-6. Tumn the throttle lever to THE START position (open by about 30 degrees) (Fig-5-D)
3-7. Operate Starter  In case of recoil starter
By pulling the starter knob slowly, you will reach such a point where resistance becomes strong (compression point). By pulling it further, you will find a point where resistance is reduced. Return the knob, but slowly return it originally. (Fig-7-D)

VEVOR Forward Plate Compactor Gas Engine - Fig4

Warning CAUTION
Do not pull the rope all the way and do not take your hand off the pulled knob but slowly retumn to its original position
3-8. After starting up the engine,be sure to perform a warm up the engine, be sure to perform a warm up run for 2 to 3 minutes.
This should be performed without fail, particularly during the winter season.

VEVOR Forward Plate Compactor Gas Engine - Fig5

7.4 OPERATION
4-1. As the engine warms up, gradually move the choke lever to the OPEN position. (Fig-8)
4-2. Move the speed control lever from the LOW to the HIGH position. When the engine speed reaches approximately 2,300-2,600 PRM, the centrifugal clutch engages. If the engine speed increased very slowly, it is possible that the clutch can slip. Do not operate the speed control lever slowly. (Fig-9.10)VEVOR Forward Plate Compactor Gas Engine - Fig6 OIL ALERT SYSTEM (Optional)
The Oil Alert system is designed to prevent engine damage caused by an insufficient amount of oil in the crankcase. Before the oil level in the crankcase can fall below a safe limit, the Oil Alert System will automatically stop uie engnie e engine swiwi win renian m uie ON position).
Warning NOTICE
If the engine stops and will not restart, check the engine oil level.
4-3. When compacting asphalt, it is advisable to paint the bottom face of the vibrating plate with diesel fuel. This will assist in preventing the plate from sticking to the asphalt.
4-4. When shutting off the vibrator, tum the speed control lever from the HIGH to a LOW position. Do not move the speed control lever slowly.

VEVOR Forward Plate Compactor Gas Engine - Fig7

7.5 TRANSPORTATION
5-1. Be sure to stop the engine while transporting.
5-2. Screw up the fuel tank cap securely and close the fuel valve to avoid fuel leaking.
5-3. Intransportation by car, fix the machine securely not to move or fall. In case of driving for long distances or off-road, take out fuel from the tank.
VEVOR Forward Plate Compactor Gas Engine - Fig87.6 SHUTDOWN
To stop the engine in an emergency, tum the stop switch to the OFF position.
Under normal conditions, use the following procedure:
6-1. Set the speed control lever at the low speed position and allow the engine to run at low speed for 2 or 3 minutes before stopping.( Fig-11)
6-2.Tum the stop switch to the OFF position. (Fig- 12)
6-3.Close the fuel cock. (Fig-13)VEVOR Forward Plate Compactor Gas Engine - Fig9 7.7 SERVICE&STORAGE
Warning CAUTION
Flammable liquid: Stop engine and do not smoke or allow work in immediate area when refueling. Fire or explosion could result from flames or sparks.
Moving parts: Shutdown engine before performing service or maintenance. Contact with moving parts can cause serious injury.
High temperature: Allow machine and engine to cool before performing service or maintenance. Contact with hot components can cause a serious bum.
7-1. Daily Service
Remove mud, dirt, etc, from the unit.
Clean bottom face of the vibrating plate.
Check the air cleaner element and clean it if necessary.
Check all nuts, bolts, and screws for tightness and re-tighten as necessary.

VEVOR Forward Plate Compactor Gas Engine - Fig10

7-2. Weekly Service
AR CLEANER SERVICE (Fig-14)
Dirty air cleaner elements will cause starting difficulty, power loss, engine malfunctions, and shorten engine life extremely.
Keep the air cleaner element clean. URETHANE FOAM ELEMENT
Remove the element and wash it in kerosene or diesel fuel. Then saturate it in a mixture of 3 parts kerosene or diesel fuel and 1 part engine oil. Squeeze the element to remove the mixture and install it in the air cleaner.
URETHANE FOAM DUAL STRUCTURE

  1. Clean the urethane foam in the same way as described above.
  2. Wash the element in kerosene or diesel fuel. Saturate it in a mixture of 3 parts kerosene or diesel fuel and 1 part engine oil. Shake off excessive oil.

B. Remove spark plug, clean and adjust the spark plug gap to 0.6-0.7mm(0.02-0.03 in.). (Fig-15)
C. Drain the motor oil of the engine and replace with new specified oil. (Fig-16)
Warning NOTE: When the engine is new, the first oil change must be made after 20 hours of operation and replenish the oil tank before operating.
7-3. Monthly Service
Change the oil in the vibrator assembly.
7-4. Storage
When storing the compactor for long periods after an operation.
A. Thoroughly drain the fuel from the fuel tank fuel pipe and carburetor.
B. Pour a few drops of motor oil into the cylinder by removing the spark plug. Rotate the engine several times by hand so that the cylinder interior is covered with oil.
C. Clean the outer surface of the machine with an oil moistened cloth. Cover the unit and store it in a humidity-free area.

CARE & PREVENTIVE MAINTENANCE

Check the oil level in the motor crankcase daily. Check the vibrator oil level weekly. Inspect the rubber anti vibration mounts for wear or deterioration. Clean the underside of the plate regularly to prevent a Build-up of material.

SERVICE

Change the oil in the motor crankcase regularly to minimize wear. Inspect, clean and / or replace the motor air cleaner regularly, particularly when operating in a dusty environment. Inspect, clean and / or replace the spark plug regularly Check all fasteners for tightness as the machine is subject to vibration. Check V belt tension, wear and that it is running true. Adjust or replace as required.
Vibrator oil check

  1. Place the plate compactor horizontally on a flat surface. Make sure the compactor is level when checking the oil in the vibrator assembly.
  2. Check vibrator oil level by removing the plug (vibrator oil gauge) as shown in Fig-17. The oil level should be up to the oil plug. If ol is required, replace using SAE motor oil, as suggested in the table Fig-1.
  3. When changing the vibrator oil, remove the drain plug (Fig-17), and simply tip the compactor to drain the oil. Note that the oil will drain more easily while it is hot.

TROUBLESHOOTING

SYMPTOM POSSIBLE CAUSES AND CORRECTION
Motor will not start -Check the ON/OFF switch to ensure that it is switched ‘ON’.
-Check the fuel supply.
-If a Honda or Kama motor is fitted check the crankcase oil level as and oil sensor device is fitted to these motors which prevents starting and stops the motor when the oil level is low.
-Ensure the carburetor jet and bowl to ensure they are than.
Motor stops -Check the fuel supply
Petrol Motor lacks power. -Check the condition of the air filter
Insufficient vibration -Check for a slipping or a missing see belt.
Machine is not moving freely -Check the underside of the plate for a build up of material.

BEARINGS
The following bearings are sealed:
Centrifugal Clutch – grease lubricated
Vibrator – oil bath lubricated
FINISH
The machine is finished in gold equipment enamel and the handle in black-backed enamel.
The exposed metal surface is zinc electroplated for corrosion protection.

REPLACEMENT PARTS LIST

VEVOR Forward Plate Compactor Gas Engine - PARTS

PART NO. DESCRIPTION OTY
1 Hexagonal Bolt 2
2 Spring Washer 14
3 Large Washer 6
4 Belt Cover 1
5 Special Bolt (fine teeth) 1
6 Flat Key (engine) 1
7 Clutch Assy 1
8 Belt 1
9 Hexagonal Bolt 2
10 Spring Washer 10
11 Flat Washer 2
12 Shaft Circlip 2
13 Flat Washer 4
14 Trolley Wheel 2
15 Wheel Axle 1
16 Hexagonal Bolt 2
17 Large Washer 2
18 Handrail Liner 2
19 Handrail Rubber 2
20 Handle(Bellow) 1
21 Plum Nut 2
22 Handle Gasket 2
23 Fixing Screw for Foldable Handle 2
24 Handle(top) 1
25 Insert Hexagonal Locking Nut 2
26 Spring Washer 2
27 Flat Washer 4
28 Throttle Lever Assy 1
29 Hexagonal Bolt 2
30 Engine 1
31 Plate Assy for Engine Mounting 1
32 Insert Hexagonal Locking Nut 2
33 Flat Washer 4
34 Handrail Rubber Column 2
35 Hexagonal Bolt 4
36 Hexagon Flange Nut 4
37 Hexagonal Bolt 2
38 Socked Head Bolt 4
39 Flat Washer 12
4o Lifting Plate 1
41 Insert Hexagonal Locking Nut 4
42 Shock Absorber for Vibrating Plate 4
43 Hex Nut 4
44 Aluminum Washer 1
45 Oil Plug Bolt 1
46 Hexagon Socket Bolt 8
47 Case Cover 1
48 Paper Cushion 2
49 Deep Groove Ball Bearing 2
50 Base Plate Assy 1
51 Eccentric Shaft 1
52 Flat Key 1
53 Oil Seal 1
54 Bearing Cover for Pulley 1
55 Engine Pulley 1
56 Large Washer 5
57 Hexagonal Bolt(with Air Vent) 1

Product technical parametas

Product name FORWARD PLATE COMPACOR
model CNP60C CNP50C
Power 6 5hp 2 8hp
Shock frequency 5600 vpm 5250 vpm
Overall Dimensions (L*W*H) 24.22″13.5r35.44 (615*345*900mm) 21.26″14.57″37.41 (540*370*950mm)

This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won’t inform you again if there are any technology or software updates on our product.
VEVOR
E-mait:
https://www.vevor.com/support
Manufacturer: WUXI CHUANGNENG MACHINERY MANUFACTURING CO., LTD.
Address: Miaotanggiao village, Qiangiao Town, Huishan District, Wuxi City, 214153, P.R. China
Importer: WAITCHX
Address: 250 bis boulevard Saint-Germain 75007 Paris
Importer; FREE MOOD LTD
Address: 2 Holywell Lane, London, England, EC2A 3ET
Symbol EUREP UK LTD
UNIT 2264, 100 OCK STREET, ABINGDON OXFORDSHIRE
ENGLAND OX14 5DH
HOTDOG B107 Head Warming Wrap icon 6 EUREP GmbH
Unterlettenweg 1a, 85051 Ingolstadt,
Germany

VEVOR logoE-mail: https://mww.vevor.com/support

Documents / Resources

VEVOR Forward Plate Compactor Gas Engine [pdf] Instruction Manual
Forward Plate Compactor Gas Engine, Plate Compactor Gas Engine, Compactor Gas Engine, Gas Engine, Engine

References

Leave a comment

Your email address will not be published. Required fields are marked *