XPO tool logoOperation Manual
Mortar Mixer with Single Stirrer
62354XPO tool 62354 Dual Speed Paint And Mortar MixerIllustration similar, may vary depending on model

62354 Dual Speed Paint And Mortar Mixer

Read and follow the operating instructions and safety information before using for the first time.
Technical changes reserved!
Due to further developments, illustrations, functioning steps, and technical data can differ insignificantly.
Updating the documentation
If you have suggestions for improvement or have found any irregularities, please contact us.
The information contained in this document may alter at any time without previous notice. It is prohibited to copy or spread any parts of this document in any way without prior written allowance. All rights reserved.
The WilTec Wildanger Technik GmbH cannot be held accountable for any possible mistakes in this operating manual, nor in the diagrams and figures shown.
Even though, the WilTec Wildanger Technik GmbH has undergone biggest possible efforts to ensure that the operating manual is complete, faultless, and up to date, mistakes cannot be entirely avoided.
If you should find a mistake or wish to make a suggestion for improvement, we look forward to hearing from you.
Send an e-mail to: service@wiltec.info
or use our contact form: https://www.wiltec.de/contacts/
The most recent version of this manual in various languages can be found in our online shop via: https://www.wiltec.de/docsearch
Our postal address is:
WilTec Wildanger Technik GmbH
Königsbenden 12
52249 Eschweiler
Germany
To return orders for exchange, repair, or other purposes, please use the following address. Attention!
To allow for a smooth execution of your complaint or return, it is important to contact our customer service team before returning the goods.
Returns Department
WilTec Wildanger Technik GmbH
Königsbenden 28
52249 Eschweiler
E-mail: service@wiltec.info
Tel: +49 2403 55592–0
Fax: +49 2403 55592–15

Introduction

Thank you for purchasing this quality product. To minimise the risk of injury we urge that our clients take some basic safety precautions when using this device. Please read the operation instructions carefully and make sure you have understood its content.
Keep these operation instructions safe.

Product description

This product is a powerful, electrically operated mixer for stirring and mixing building materials and chemical substances. It can be used with the supplied single stir bar, but also together with other mixing tools. Due to the two-stage speed setting, this stirring unit can be used to stir a variety of different materials and is therefore suitable, for example, for mixing difficult-to-mix materials such as highly compacted mortar.

Safety precautions

Warning: Read these operating instructions and the safety instructions contained therein and make sure that you have understood everything. Failure to follow the instructions in this document could result in damage to the device and its surroundings, as well as serious injury or even death. The term “power tool” in the warning notices refers to a tool operated on the mains (corded) or a battery-operated (cordless) tool.
Keep the instructions in a safe and dry place so that you can refer to them at any time.
General safety precautions

XPO tool 62354 Dual Speed Paint And Mortar Mixer - Symbols 1 Read the instructions for use and familiarise yourself with the device before you start working.
XPO tool 62354 Dual Speed Paint And Mortar Mixer - Symbols 2 Always wear respiratory protection when working with chemicals, as toxic fumes are generated or toxic particles can be blown up.
XPO tool 62354 Dual Speed Paint And Mortar Mixer - Symbols 3 Always wear protective goggles when using this tool to avoid injury from particles falling off or
being blown up.
XPO tool 62354 Dual Speed Paint And Mortar Mixer - Symbols 4 Always wear hearing protection when using this tool.

Work area safety

  • Keep your work area clean and well lit. Untidy and poorly lit work areas increase the risk of accidents.
  • Never operate electrical devices in an explosive environment, e.g., near flammable liquids, gases, or dust. Electrical devices can cause sparks that can ignite these materials.
  • Keep bystanders and children away from the work area while you are using the electrical device.
    Distractions can cause you to lose control of the device.
  • Always switch off the power tool when this is not in use, making sure that the device has been properly disconnected from the power supply during longer breaks and when finishing work.
  • Do not switch the tool on before the mixer is immersed deep enough in the substance to be mixed and do not remove it before it has been switched off. A premature switch-on as well as a premature removal can lead to splashing of the mixture and thus, depending on the substance, to damage to the work area and serious injuries.

Electric safety

  • Before connecting the device, make sure that the voltage of the power source corresponds to the voltage specified on the type plate. Do not make any changes to the plug and do not use adapters with earthed power tools.
  • Avoid body contact with earthed surfaces, e.g., pipes, heaters, stoves, or refrigerators. There is an increased risk of electric shock if your body is grounded.
  • Never expose electric devices to rain, moisture, or environments with very high humidity. The penetration of water into an electrical device significantly increases the risk of electric shock.
  • Handle the power cord carefully. Never carry or lift devices by the power cord and never pull the power plug out of the socket with the help of the cable. Keep the power cord away from heat, oil, sharp objects, or moving parts. Replace damaged power cords immediately as they increase the risk of electric shock.
  • If you want to operate an electrical device outdoors, always use an extension cable suitable for outdoor areas. Outdoor extension cords reduce the risk of electric shock.
  • If the operation of a power tool in a location with very high humidity is unavoidable, it is essential to use an FI circuit breaker to reduce the risk of electric shock. Wearing rubber gloves for electricians and shoes with rubber soles further reduces the risk of accidents.

Personal safety

  • Stay vigilant and pay full attention to what you are doing while using a power tool. Do not use the device when you are tired or under the influence of alcohol, drugs, or medication. A moment of inattention while using a power tool can result in serious injury.
  • Always wear appropriate clothing when using a power tool. Avoid wearing loose clothing or jewellery, and tie long hair securely to prevent them from becoming entangled in moving parts.
    Also keep all handles of the tool dry, clean, and free from oil and lubricants.
  • Always wear appropriate safety equipment when using a power tool. Always wear a dust mask, hearing protection and protective goggles when working with the device. Non-slip shoes, safety gloves and a safety helmet must be worn under appropriate  working conditions and reduce the risk of accidents.
  • Avoid unintentional start-up. Always make sure the device is turned off when connecting. Do not carry electrical devices with your finger on the switch, and do not connect devices switched on to the mains.
  • Remove all adjusting wrenches and other wrenches before switching on the tool. An adjustment wrench or another wrench on a moving part can cause serious injury.
  • Do not stoop down too much and always make sure that you are able to maintain your balance and a firm and secure stance. Balance and a secure stance allow better control of the power tool in unexpected situations.
  • If devices for connecting de-dusting and extraction systems are provided, make sure that these have been connected before starting work and that they are working properly. The use of such devices can reduce the hazards caused by dust.
  • Do not mix any substances with a flash point below 21 ℃, as the mixing process could otherwise ignite them.

Safety while using and maintaining

  • The power tool must not be used forcibly. Always use the right tool for the job at hand. Tools and equipment are safer and more reliable when used for the work for which they are intended.
  • Do not use a device whose switch is defective and cannot be switched on or off properly. Any device that cannot be controlled by the switch is dangerous and must be repaired immediately.
  • Pull the power plug before changing settings, accessories, performing maintenance work, or preparing the device for storage. This safety precaution reduces the risk of unintentional switching on.
  • Always store unused power tools out of the reach of children and do not allow them to be used by people who are not familiar with them. Devices and tools are dangerous when used by inexperienced people.
  • Always maintain equipment and tools very carefully. Always keep cutting tools sharp and clean.
    Properly maintained tools with sharp edges are less prone to deformation and easier to control.
    Any change or modification represents incorrect use, which increases the risk of accidents considerably.
  • Before each use, check the power tool for defective or worn parts, and pay particular attention to possible deformations and misalignments of moving parts. If the device is damaged, have it repaired immediately by qualified personnel. Many accidents occur due to poorly maintained equipment and tools. Creating a maintenance schedule can help extend the life of a power tool.
  • Always use the power tool, accessories, attachments, etc. in accordance with these instructions and in the manner intended for the respective power tool type, considering the working conditions and the work to be performed. Using the power tool for work for which the device is not intended increases the risk of accidents considerably.
  • Always wear hearing protection when using this power tool to prevent possible hearing loss.
  • Only hold the power tool by the insulated gripping surfaces during use when performing work in which the power tool may come into contact with hidden wiring or its own power cord. Accessories that come into contact with a live  linecan also make exposed metal parts of the power tool live, which can lead to an electric shock.

Safety while repairing and cleaning

  • Repair work may only be carried out by qualified personnel. A repair by unqualified persons increases the risk of accidents, because internal wires, for example, can be incorrectly laid or jammed or return springs of the protective device can be improperly installed.
  • Be careful when using cleaning agents and solvents as gasoline, carbon tetrachloride, ammonia, and chlorinated or ammonia-containing household cleaners can severely damage the plastic parts of the tool.

Components

XPO tool 62354 Dual Speed Paint And Mortar Mixer - Components

Name
1 Stirrer
2 Tool connecting shaft M14
3 Electronic speed regulator
4 2 step mechanical speed regulator
5 Locking device
6 Start button
7 Motor housing

Technical data

Nominal voltage (V) 230
Nominal frequency (㎐) 50
Nominal power (W) 1600
Rotation speed (r ⁄ min) 0–780
Mixing diameter (㎜) 140

Maintenance

  • Proper maintenance of the machine can extend its service life.
  • The handle switch must always function properly and be well maintained.
  • Avoid mechanical tension in the machine, as this will inevitably damage it.
  • The hexagon socket must always be provided with a protective cover.
  • The ventilation of the motor housing must not be covered while the machine is in operation; there must be no inflammable materials in the machine.
  • The ventilation must be cleaned regularly.
  • Only identical original parts may be used on and in this machine.
  • Clean the mixer attachment after each use and before a long period of use. It is recommended that only running water or quartz sand be used for cleaning.
  • The carbon brush must be checked and serviced after 60 hours of operation. Change the brush in good time when you notice that it is worn out:
    a) First disconnect the device from the power supply, remove the motor housing (see Fig. 1).
    b) Pull out the plate and replace the carbon brush (see Fig. 2).

XPO tool 62354 Dual Speed Paint And Mortar Mixer - Components 1

Commissioning

Assembly

  1. Take the two parts of the stirrer out of the box (see Fig. 1).
  2.  Connect the two parts (see Fig. 2).
  3. Tighten them with a wrench (see Fig. 3).
  4. Place the stirrer on the discharge shaft (see Fig. 4).
  5. Tighten the screw of the stirrer (see Fig. 5).

XPO tool 62354 Dual Speed Paint And Mortar Mixer - Components 2Starting
First press the button of the locking device and then the start switch.
Mechanical speed regulator (Fig. 6)

  1. Change the speed only when the machine is switched off.
  2. Turn the speed control knob to adjust the speed.
  3. If the switch does not move to the desired position, manually turn the stirring bar a few centimetres in the direction of rotation to move the gear until the switch can be turned further.

Electronic speed regulator (Fig. 7)
The electronic speed regulator allows the speed of the stirring staff to be further adjusted during operation by simply turning it.XPO tool 62354 Dual Speed Paint And Mortar Mixer - Components 3Stopping
Release the start switch; this will stop the machine.

Disposal regulations

EU guidelines regarding the disposal of scrap electric devices (WEEE, 2012/19/EU) were implemented in the law related to electrical and electronic equipment and devices.
All WilTec electric devices that fall under the WEEE regulations are labelled with the crossed-out wheeled waste bin logo. This logo indicates that this electric equipment must not be disposed with the domestic waste.
The company WilTec Technik GmbH has been registered in the German registry EAR under the WEEEregistration number DE45283704.XPO tool 62354 Dual Speed Paint And Mortar Mixer - DisposalDisposal of used electrical and electronic devices (intended for use in the countries of the European Union and other European countries with a separate collection system for these devices).
The logo on the article or on its packaging points out that this article must not be treated as normal household waste but must be disposed to a recycling collection point for electronic and electrical waste equipment. By contributing to the correct disposal of this article you protect the environment and the health of your fellow men. Environment and health are threatened by inappropriate disposal.
Material recycling helps reduce the consumption of raw materials.
Additional information on recycling this article can be provided by your local community, municipal waste disposal facilities, or the store where you purchased the article.
Important notice:
The reprint or reproduction, even of excerpts, and any commercial use, even in part, of this instruction manual require the written permission of WilTec Wildanger Technik GmbH.

Address:
WilTec Wildanger Technik GmbH
Königsbenden 12 / 28
D-52249 Eschweiler
https://www.XPOtool.com
Item 62354
The Tool Experts
11 2022-1
XPO tool 62354 Dual Speed Paint And Mortar Mixer - Symbols

Documents / Resources

XPO tool 62354 Dual Speed Paint And Mortar Mixer [pdf] User Manual
62354 Dual Speed Paint And Mortar Mixer, 62354, Dual Speed Paint And Mortar Mixer, Speed Paint And Mortar Mixer, Paint And Mortar Mixer, Mortar Mixer

References

Leave a comment

Your email address will not be published. Required fields are marked *