PROGRESS LIGHTING P560359-31M Bristol Collection Outdoor Wall Lantern

PROGRESS LIGHTING P560359-31M Bristol Collection Outdoor Wall Lantern

PACKAGE CONTENTS

PART DESCRIPTION QUANTITY
A Fixture 1
B Glass Panel 1
C Metal Cage 1

Package Contents

HARDWARE CONTENTS (not actual size)

  • Screw (#8-32) Qty:2
    Hardware Contents
  • Wire Nut Qty:3
    Hardware Contents
  • Swivel Mounting Strap Qty:1
    Hardware Contents
  • Hex Nut (#8-32) Qty:2
    Hardware Contents
  • Cylinder Knob (#8-32) Qty:2
    Hardware Contents
  • Rubber Washer (#8-32) Qty:2
    Hardware Contents
  • Flat Head Screw With Silicone Ring (#8-32) Qty:4
    Hardware Contents

Symbol Safety Information

Please read and understand this entire manual before attempting to assemble, operate or install the product.

CAUTION: Read instructions carefully and turn electricity off at main circuit breaker panel before beginning installation.
CAUTION: Risk of fire. Min. 90°C supply conductors. Consult a qualified electrician to ensure correct branch circuit conductor.
WARNING: If any Special Control Devices are used with this fixture, follow instructions carefully to assure full compliance with N.E.C. requirements. If there are any questions, contact a qualified electrical contractor.
CAUTION: All glass is fragile. Use care when handling glass shades and bulbs.
WARNING – To comply with the National Electrical Code and Underwriters Laboratories requirements, when installed outdoors, or in wet locations, the edge of the wall plate coming in contact with the mounting surface, must be sealed with a latex waterproof caulking to prevent water from entering the outlet box.

Preparation

  1. Before beginning installation, make sure all parts are included using the contents diagrams from page 1. If any part is missing or damaged, do not attempt to assemble, install or operate the product.
  2. Estimated assembly time: 30 minutes.
  3. Tools required for assembly (not included): Phillips screwdriver, pliers, wire stripper, safety glasses, electrical tape, ladder.

Care And Maintenance

Shut off main power supply before cleaning product or changing light bulbs. To clean, wipe with damp cloth. Do not use abrasive cleaners or cleaners that contain alcohol.

Assembly Instructions

  1. Loosely thread the screws (AA) and the hex nuts (DD) onto the swivel mounting strap (CC). You now need to adjust the screw length according to the fixture canopy depth.
    Assembly Instructions
  2. With the swivel bracket facing out, attach this assembly to the outlet box using the mounting screws supplied with the outlet box (not provided). Tighten securely.
    Assembly Instructions
    Lift up the fixture to the mounting surface and pass the screws (AA) through the two mounting holes in the fixture canopy.
    While holding the fixture with one hand, thread the screws (AA) in or out of the swivel mounting strap (CC) until 3/16″ of threads are showing. That should be enough to mount the fixture as instructed in step 4.
    Next, take the fixture down and go back and tighten the hex nuts (DD) up against the swivel mounting strap (CC). You now should have the correct length of threads for mounting the fixture.
    Assembly Instructions
    Thread both screws in or out for adjustment
  3. Strip 3/8″ of insulation from the electrical wire ends.
    Using wire nuts (BB), connect the WHITE fixture wire to the WHITE supply wire from the outlet box; connect the BLACK fixture wire to the BLACK supply wire from the outlet box ..
    Assembly Instructions
    Connect the fixture ground wire and supply ground wire using a wire nut or by fastening to the ground screw on the swivel mounting strap. Push all of the wire connections carefully into the outlet box.
  4. Attach fixture (A) to screws (AA) using cylinder knobs (EE) and rubber washer (FF) to Secure tightly.
    Assembly Instructions
  5. Thread the lamps (not included) into the fixture sockets.
    Use 60-watt MAX incandescent medium base lamp, SBCFL or SBLED.
    Assembly Instructions
  6. Attach the glass shade (B) into metal cage (C).
    Secure in place by bending over the four small metal tabs.
    Assembly Instructions
  7. Attach the the metal cage (C) onto fixture (A) and use flat head screw with silicone rings (GG) to secure tightly.
    Assembly Instructions

WARRANTY AND EXCLUSIVE REMEDY

Progress products, when properly installed and under normal conditions of use, are warranted to our customers only to be free from defects in material and workmanship at time of shipment. All warranty claims must be asserted within one year from date of purchase of the subject items; thereafter, warranty claims will not be honored. Customers’ sole remedy for a warranty claim or otherwise shall be limited to repair or replacement of the subject product if it is shown to have been defective in material or workmanship at time of shipment. Progress’s sole and maximum liability for a defective product shall never exceed the cost of the subject product. EXCEPT FOR SUCH A WARRANTY AND EXCLUSIVE REMEDY AS STATED (AND THE EXPRESS WARRANTY OF TITLE}, WE DISCLAIM All OTHER WARRANTIES, WHETHER EXPRESS OR IMPLIED, AND SPECIFICALLY DISCLAIM THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL WE BE LIABLE TO CUSTOMER IN WARRANTY, CONTRACT, NEGLIGENCE, STRICT LIABILITY OR OTHERWISE, FOR ANY DAMAGES, WHETHER INCIDENTAL OR CONSEQUENTIAL, WHICH ARE ALLEGED TO BE CAUSED BY ONE OR MORE OF OUR PRODUCTS, BEYOND THE COST TO THE CUSTOMER OF THE SUBJECT PRODUCT OR PRODUCTS. Therefore, the customer’s sole and exclusive remedy against us for breach of the warranty, breach of contract or negligence or strict liability or otherwise shall be limited to repair or replacement of the subject product at our option (excluding installation and removal charges which shall not be our liability) or, if we choose, refund of the purchase price. In no case does our warranty and exclusive remedy extend to anybody other than our customers. Our customers are not authorized to extend warranties or remedies on our behalf to anyone. Such unauthorized extensions of warranties or remedies by the customer shall remain customer’s responsibility. Customer is responsible for determining the suitability of our products for customer’s use or resale, or for incorporating them into objects or for applications which customer designs, assembles, constructs or manufactures.

CUSTOMER SUPPORT

 THANK YOU for selecting Progress Lighting
SymbolWe can assist you with questions regarding product information, assembly or missing parts
Symbol 800-447-0573 8am-8pm (Eastern), Monday-Friday
Symbol customerservice@progresslighting.comLogo

Documents / Resources

PROGRESS LIGHTING P560359-31M Bristol Collection Outdoor Wall Lantern [pdf] Instruction Manual
P560359-31M Bristol Collection Outdoor Wall Lantern, P560359-31M, Bristol Collection Outdoor Wall Lantern, Collection Outdoor Wall Lantern, Outdoor Wall Lantern, Wall Lantern, Lantern

References

Leave a comment

Your email address will not be published. Required fields are marked *