PROGRESS LIGHTING logo2

P500439
1-LT LARGE PENDANT

P500438
1-LT SMALL PENDANT

PACKAGE CONTENTS

PART

DESCRIPTION QUANTITY
P500438

P500439

A

Fixture 1 1
B Glass Shade 1

1

C

Socket Ring 1 1
D Glass shade 1

1

E

Cap 1 1
F Coupling 1

1

G

Canopy 1

1

PROGRESS LIGHTING P500439 Carillon Collection One Light A1        PROGRESS LIGHTING P500439 Carillon Collection One Light A2
P500438                P500439

PROGRESS LIGHTING P500439 Carillon Collection One Light A3

HARDWARE CONTENTS (not actual size)

AA

PROGRESS LIGHTING Parts-A-1

BB

PROGRESS LIGHTING P400374 6LT Linear Island - b1

CC

PROGRESS LIGHTING Parts-A-2

DD

PROGRESS LIGHTING Parts-A-3

Screw (#8-32) Qty:2 Wire Nut Qty:3 Round Mounting Plate Qty:1

Hex Nut (#8-32) Qty:2

EE

PROGRESS LIGHTING P400374 6LT Linear Island - b3

FF

PROGRESS LIGHTING P400374 6LT Linear Island - b4

GG

PROGRESS LIGHTING P400374 6LT Linear Island - b5

HH

PROGRESS LIGHTING P400374 6LT Linear Island - b6

Cylinder Nut (#8-32) Qty:2 12″ Pipe (1/8IP) Qty:4 6″ Pipe (1/8IP) Qty:1

Nipple (1/81P) Qty:5

THANK YOU for selecting Progress Lighting

PROGRESS LIGHTING - Q&A We can assist you with questions regarding product information, assembly or missing parts

PROGRESS LIGHTING - Telephone800-447-0573
8am-8pm (Eastern), Monday-Friday

PROGRESS LIGHTING - Mail customerservice@progresslighting.com

PROGRESS LIGHTING - Caution Safety Information

Please read and understand this entire manual before attempting to assemble, operate or install the product.

CAUTION: Read instructions carefully and turn electricity off at main circuit breaker panel before beginning installation.

CAUTION: Risk of fire. Min. 90°C supply conductors. Consult a qualified electrician to ensure correct branch circuit conductor.

WARNING: If any Special Control Devices are used with this fixture, follow instructions carefully to assure full compliance with N.E.C. requirements. If there are any questions, contact a qualified electrical contractor.

CAUTION: All glass is fragile. Use care when handling glass shades and bulbs.

Preparation
  1. Before beginning installation, make sure all parts are included using the contents diagrams from page 1. If any part is missing or damaged, do not attempt to assemble, install or operate the product.
  2. Estimated assembly time: 30 minutes.
  3. Tools required for assembly (not included): Phillips screwdriver, pliers, wire stripper, safety glasses, electrical tape, ladder.
Care and Maintenance

Shut off main power supply before cleaning product or changing light bulbs. To clean, wipe with damp cloth. Do not use abrasive cleaners or cleaners that contain alcohol.

Assembly Instructions

PROGRESS LIGHTING P500439 Carillon Collection One Light B1
1. Loosely thread the screws (AA) and the hex nuts (DD) onto the round mounting plate (CC) as shown. You now need to adjust the screw length according to the fixture canopy depth.

2. Attach this assembly to the outlet box using the mounting screws supplied with the outlet box (not provided). Tighten securely.

Lift up the fixture and pass the screws (AA) through the two mounting hole in the fixture canopy. While holding the fixture with one hand, thread the screws (AA) in or out of the round mounting plate (CC) until 3/16″ of threads are showing. That should be enough to mount the fixture as instructed in step 6.

Next, take the fixture down and go back and tighten the hex nuts (DD) up against the round mounting plate (CC). You now should have the correct length of threads for mounting the fixture.

PROGRESS LIGHTING P500439 Carillon Collection One Light B2 PROGRESS LIGHTING P500439 Carillon Collection One Light B3

  1. INCORRECT
  2. CORRECT
  3. 3/16″ [5mm]

Thread both screws up & down for adjustment

PROGRESS LIGHTING P500439 Carillon Collection One Light B4
3. Pass the wire through the glass shade (D) and cap (E) out of the coupling (F).
Attach the glass shade (D) and the cap (E) onto the nipple of fixture (A), use the coupling (F) to secure tightly.

PROGRESS LIGHTING P500439 Carillon Collection One Light B5
NOTE: During this step, determine the hanging length of your fixture by adding or removing .The electrical and ground wire may also optionally be cut to length.

Do NOT cut electrical or ground wires until this length is determined. Leave AT LEAST 6 inches MINIMUM of wire past the canopy to allow for easy connections in step 5.

4. Once hanging length is determined, pass the wires through pipe(FF), pipe (GG) and nipples (HH) to achieve overall desired length, tightening pipe assembly to fixture (A) securely. Pass the wires up through the canopy (G) and tighten canopy (G) to pipe assembly (FF).

WARRANTY AND EXCLUSIVE REMEDY: Progress products, when properly installed and under normal conditions of use, are warranted to our customers only to be free from defects in material and workmanship at time of shipment. All warranty claims must be asserted within one year from date of purchase of the subject items; thereafter, warranty claims will not be honored. Customers’ sole remedy for a warranty claim or otherwise shall be limited to repair or replacement of the subject product if it is shown to have been defective in material or workmanship at time of shipment. Progress’s sole and maximum liability for a defective product shall never exceed the cost of the subject product. EXCEPT FOR SUCH A WARRANTY AND EXCLUSIVE REMEDY AS STATED (AND THE EXPRESS WARRANTY OF TITLE), WE DISCLAIM ALL OTHER WARRANTIES, WHETHER EXPRESS OR IMPLIED, AND SPECIFICALLY DISCLAIM THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL WE BE LIABLE TO CUSTOMER IN WARRANTY, CONTRACT, NEGLIGENCE, STRICT LIABILITY OR OTHERWISE, FOR ANY DAMAGES, WHETHER INCIDENTAL OR CONSEQUENTIAL, WHICH ARE ALLEGED TO BE CAUSED BY ONE OR MORE OF OUR PRODUCTS, BEYOND THE COST TO THE CUSTOMER OF THE SUBJECT PRODUCT OR PRODUCTS. Therefore, the customer’s sole and exclusive remedy against us for breach of the warranty, breach of contract or negligence or strict liability or otherwise shall be limited to repair or replacement of the subject product at our option (excluding installation and removal charges which shall not be our liability) or, if we choose, refund of the purchase price. In no case does our warranty and exclusive remedy extend to anybody other than our customers. Our customers are not authorized to extend warranties or remedies on our behalf to anyone. Such unauthorized extensions of warranties or remedies by the customer shall remain customer’s responsibility. Customer is responsible for determining the suitability of our products for customer’s use or resale, or for incorporating them into objects or for applications which customer designs, assembles, constructs or manufactures.

PROGRESS LIGHTING P500439 Carillon Collection One Light B6

  1. Ribbed
  2. Smooth

5. Strip 3/8″ of insulation from the electrical wire ends. Using wire nuts (BB), connect RIBBED fixture wire to the WHITE supply wire from the outlet box; connect the SMOOTH fixture wire to the BLACK supply wire.

Connect the fixture ground wire and supply ground wire using a wire nut or by fastening to the ground screw on the round mounting plate. Push all wire connections into the outlet box.

PROGRESS LIGHTING P500439 Carillon Collection One Light B7
6. Pass the screws through the two holes in the canopy. Secure the fixture (A) to the screws (AA) using the two cylinder nuts (EE) provided. Tighten securely in place.

PROGRESS LIGHTING P500439 Carillon Collection One Light B8
7. Attach the glass shade (B) to the fixture (A) using the socket ring (C) to secure it tightly.

Thread the lamp (not included) into the fixture socket. Use 100-watt MAX incandescent medium base lamp, SBCFL or SBLED.

93165788

Documents / Resources

PROGRESS LIGHTING P500439 Carillon Collection One Light Brushed Gold Large Contemporary Pendant [pdf] Instruction Manual
P500439 Carillon Collection One Light Brushed Gold Large Contemporary Pendant, P500439, Carillon Collection One Light Brushed Gold Large Contemporary Pendant, Collection One Light Brushed Gold Large Contemporary Pendant, One Light Brushed Gold Large Contemporary Pendant, Brushed Gold Large Contemporary Pendant, Large Contemporary Pendant, Contemporary Pendant, Pendant

References

Leave a comment

Your email address will not be published. Required fields are marked *