The Home Decorators Collection Vanity Installation Guide for Bathroom Vanities is a comprehensive manual designed to assist users in installing their Home Decorators Collection bathroom vanities with ease. The guide contains important safety information that must be read and understood before starting the installation process to avoid serious injury. It also provides detailed instructions on the tools required and the hardware included in the plastic bag within the vanity. The guide covers the leg assembly, leveling the cabinet, vanity installation, drawer removal and installation, hinge/door adjustment, mirror installation, and care and cleaning. Additionally, it includes important health notices for Minnesota residents and California customers only. The guide concludes with a limited lifetime warranty applicable to the USA and Canada. For questions, problems, or missing parts, customers are encouraged to contact Customer Service before returning to the store. With this guide, users can confidently install their Home Decorators Collection bathroom vanities and enjoy their new addition to their home.

HOME-DEPOT-Product

HOME DEPOT 552168 Home Decorators Collection Bathroom Vanities

HOME-DEPOT-552168-Home-Decorators-Collection-Bathroom-Vanities-Product

SAFETY INFORMATION

To ensure that your installation goes smoothly, please read these instructions thoroughly prior to starting.
DANGER: Failure to follow warnings and cautions could result in serious injury. Do not exceed the maximum load capacity. Do not stand on the cabinet. Use cabinet on level ground.
WARNING: The base cabinet supports a maximum weight of 200 lbs. Exceeding the maximum weight limit will compromise the integrity of the cabinet structure and could cause the cabinet to fail
CAUTION: Do not hang from the cabinet.

TOOLS REQUIREDHOME-DEPOT-552168-Home-Decorators-Collection-Bathroom-Vanities-fig-1

HARDWARE INCLUDED

All decorative hardware is included in a plastic bag within the vanity.

HOME-DEPOT-552168-Home-Decorators-Collection-Bathroom-Vanities-fig-2

Installation

Leg Assembly 

STOP: Screw-on legs come packed in a separate box and MUST be installed.

Step 1 

  • Remove the 4 screws’ legs from the box. HOME-DEPOT-552168-Home-Decorators-Collection-Bathroom-Vanities-fig-3

Step 2  

  • Lay vanity with legs facing up.HOME-DEPOT-552168-Home-Decorators-Collection-Bathroom-Vanities-fig-4

For cabinet 60” or wide ONLY

Step 1 

  • Remove the 5 screws legs from the box.

Step 2 

  • Lay vanity with legs facing up.

HOME-DEPOT-552168-Home-Decorators-Collection-Bathroom-Vanities-fig-5

Continue to step 3 and with the rest of the installation

Step 3

  • Align the corresponding letter on the screw-on leg to vanity leg. Letters are located on the back side of each vanity leg. HOME-DEPOT-552168-Home-Decorators-Collection-Bathroom-Vanities-fig-6

Step 4 

  • Screw leg clockwise until aligned and tight. Letters should be facing rear of the cabinet when tight. HOME-DEPOT-552168-Home-Decorators-Collection-Bathroom-Vanities-fig-7

Step 5  

  • Screw levelers (included in the plastic bag) onto the bottom of each screw-on leg. Once screw-on legs and levelers are installed, raise the vanity to a vertical position. HOME-DEPOT-552168-Home-Decorators-Collection-Bathroom-Vanities-fig-8

Leveling the Cabinet

  • Make sure the base of the vanity is leveled by laying a level (not included) across the top. If adjustment is needed use base levelers located under each leg.
  • To lower the cabinet turn levelers clockwise or to rise the cabinet turn levelers counterclockwise.
  • Adjust until leveled. HOME-DEPOT-552168-Home-Decorators-Collection-Bathroom-Vanities-fig-9

Vanity Installation

  • Fasten the vanity cabinet to the wall with 2 screws (not included) into wall studs through the back top rail or use toggle bolts if necessary.
  • Decorative hardware is included in a plastic bag within vanity. Attach so the decorative hardware is visible from the outside of the doors. HOME-DEPOT-552168-Home-Decorators-Collection-Bathroom-Vanities-fig-10

Drawer Removal (If Needed)

In order to install vanity top it may require the removal of vanity drawers. If so, follow these steps.

  • Open the drawer as far as possible.
  • Identify the plastic spring clips located in both slides.
  • At the same time, press the right slide spring clip downward and the left slide spring clip upward. (Fig.#1 & Fig.#2).
  • Once both spring clips are held in the indicated position, pull the drawer straight out. HOME-DEPOT-552168-Home-Decorators-Collection-Bathroom-Vanities-fig-11
    HOME-DEPOT-552168-Home-Decorators-Collection-Bathroom-Vanities-fig-12

Vanity Top Installation (If Applicable)

  • Set the vanity top on top of the vanity base, checking the location of the p-trap and drain.
  • Remove the top and install the faucet per the manufacturer’s installation instructions.
  • Hand tightens the pop-up drain with a wrench. Be careful not to over-tighten the pop-up drain. Over tightening may cause cracks on the marble top.
  • Apply a thin bead of silicone compound around the vanity base and set the vanity top carefully in place. Remove any excess silicone compound with a wet rag.
  • Install the faucet, water lines, and P-trap according to the manufacturer’s installation instructions. HOME-DEPOT-552168-Home-Decorators-Collection-Bathroom-Vanities-fig-13

Drawer Installation (If Needed)

If removal of vanity drawers was necessary then follow these steps to reinstall. 

  • Maintaining both slides completely closed, move the component of slides with ball bearings to the front of the slides.
  • Carefully line up the slides of the drawer box with the slides in the vanity and close the drawer all the way back.
  • Open the drawer completely to ensure it is properly installed.

Hinge/Door Adjustment (If Applicable)

The door alignment was set in the factory, but it could have shifted during transit. If adjustment is needed, follow the instructions provided in the adjacent chart. HOME-DEPOT-552168-Home-Decorators-Collection-Bathroom-Vanities-fig-14

 

Drawer Installation (If Needed)

  • Remove decorative hardware from the drawer front.
  • Hold drawer front in place and slightly loosen both alignment screws.
  • Move the drawer front left, right, up or down to desired position for alignment.
  • While holding the drawer front in place, tighten the alignment screws securely.
  • Install the decorative hardware to the outside of the drawer front. HOME-DEPOT-552168-Home-Decorators-Collection-Bathroom-Vanities-fig-15
    HOME-DEPOT-552168-Home-Decorators-Collection-Bathroom-Vanities-fig-16

Mirror Installation (If Included)

Determine the desired location of the mirror. Use appropriate screws or wall anchors (not included) to hang mirror. Be sure the hanging hardware is rated to handle the weight of the mirror. The mirror weight is approximately 20 lbs

Care and Cleaning 

Vanity
To clean the surface of doors or cabinets, use non-abrasive cleaners and or cleaning agents that do not contain solvents.
Vanity Top
Your vanity top will remain in its original state if you maintain and clean it properly. Clean the surface with a glass cleaner or other household cleansers that are non-abrasive. Using abrasive cleansers will damage the surface.
Mirror
Use non-abrasive cleansers only.

For California Customers Only

Warning: This product can expose you to chemicals including wood dust which is known to State of California to cause cancer. For more information, go to www.P65warnings.ca.gov

Important Health Notice For Minnesota Residents Only:
Some of the building materials used in this home (or these building materials) emit formaldehyde, eye, nose, and throat irritation, headache, nausea and a variety of asthma-like symptoms, including shortness of breath, have been reported as a result of formaldehyde exposure. Elderly persons and young children, as well as anyone with a history of asthma, allergies, or lung problems, may be at greater risk. Research is continuing on the possible long-term effects of exposure to formaldehyde. Reduced ventilation may allow formaldehyde and other contaminants to accumulate in the indoor air high indoor temperatures and humidity raise formaldehyde levels. When a home is to be located in areas subject to extreme summer temperatures, an air-conditioning system can be used to control indoor temperature levels. Other means of controlled mechanical ventilation can be used to reduce levels of formaldehyde and other indoor air contaminants. If you have any questions regarding the health effects of formaldehyde, consult your doctor or local health department.

Warranty

LIMITED LIFETIME WARRANTY APPLICABLE TO USA & CANADA

The product has been manufactured by WoodCrafters Home Products, LLC and is warranted under normal use and service, to be free from defects in material and workmanship for the life of the product from the date purchased. During this warranty period, WoodCrafters Home Products, LLC will repair or replace at WoodCrafters Home Products, LLC sole option, free of charge. Proof of purchase, photo and the nature of the problem is required. Our warranty does not cover damage or failure caused by abuse, misuse, abnormal usage, faulty installation, improper maintenance or any repair other than those by WoodCrafters Home Products, LLC. There are no obligations or liabilities on the part of WoodCrafters Home Products, LLC for consequential damage arising out of or in connection with the use or performance of the product or any indirect damages included, but not limited to labor charges for installation or removal. This warranty gives you specific legal rights, and you may also have other rights that may vary from state to state. Further information regarding this warranty may be obtained without charge by contacting Customer Service. If any parts are missing or damaged, please call 1-800-235-7747.

QUESTIONS
Questions, problems, missing parts?
Before returning to the store, please call Customer Service
(USA) 1-800-235-7747
HOMEDEPOT.COM/HOMEDECORATORS

SPECIFICATION

Product Specifications

Description

Product Name

Home Decorators Collection Vanity

Model Number

552168

Product Type

Bathroom Vanity

Weight Capacity

200 lbs

Tools Required

Not specified

Hardware Included

All decorative hardware is included in a plastic bag within the vanity.

Installation

Leg Assembly, Leveling the Cabinet, Vanity Installation, Drawer Removal and Installation, Hinge/Door Adjustment, Mirror Installation, and Care and Cleaning

Warranty

Limited Lifetime Warranty applicable to USA and Canada

Health Notices

Important Health Notice for Minnesota Residents and California Customers Only

Customer Service

For questions, problems, or missing parts, customers are encouraged to contact Customer Service before returning to the store. Call 1-800-235-7747 (USA)

FAQS

What is the warranty for the Home Decorators Collection Vanity?

The product has a limited lifetime warranty applicable to the USA and Canada. The product is warranted under normal use and service, to be free from defects in material and workmanship for the life of the product from the date purchased. During this warranty period, WoodCrafters Home Products, LLC will repair or replace at WoodCrafters Home Products, LLC sole option, free of charge. Proof of purchase, photo and the nature of the problem is required.

How do I clean the vanity top?

Clean the surface with a glass cleaner or other household cleansers that are non-abrasive. Using abrasive cleansers will damage the surface.

How do I adjust the hinge/door alignment?

Remove decorative hardware from the drawer front. Hold drawer front in place and slightly loosen both alignment screws. Move the drawer front left, right, up or down to desired position for alignment. While holding the drawer front in place, tighten the alignment screws securely. Install the decorative hardware to the outside of the drawer front.

How do I remove a drawer from the vanity?

Open the drawer as far as possible. Identify the plastic spring clips located in both slides. At the same time, press the right slide spring clip downward and the left slide spring clip upward. Once both spring clips are held in the indicated position, pull the drawer straight out.

How do I install the vanity top?

Set the vanity top on top of the vanity base, checking the location of the p-trap and drain. Remove the top and install the faucet per the manufacturer’s installation instructions. Hand tightens the pop-up drain with a wrench. Be careful not to over-tighten the pop-up drain. Over tightening may cause cracks on the marble top. Apply a thin bead of silicone compound around the vanity base and set the vanity top carefully in place. Remove any excess silicone compound with a wet rag. Install the faucet, water lines, and P-trap according to the manufacturer’s installation instructions.

How do I level the cabinet?

Make sure the base of the vanity is leveled by laying a level (not included) across the top. If adjustment is needed use base levelers located under each leg. To lower the cabinet turn levelers clockwise or to rise the cabinet turn levelers counterclockwise. Adjust until leveled.

Is the decorative hardware included in the vanity?

Yes, all decorative hardware is included in a plastic bag within the vanity.

What tools are required for installation?

The tools required for installation are not specified in the guide.

What is the weight limit for the Home Decorators Collection Vanity?

The base cabinet supports a maximum weight of 200 lbs. Exceeding the maximum weight limit will compromise the integrity of the cabinet structure and could cause the cabinet to fail.

Documents / Resources

HOME DEPOT 552168 Home Decorators Collection Bathroom Vanities [pdf] User Guide
552168, Bathroom Vanities, Vanities, Home Decorators

References

Leave a comment

Your email address will not be published. Required fields are marked *