GMC 2007-2013 Sierra 1500 Tail Light
Installation Informaion
- Unplug the tail light connector at the junction box under the truck.
- Pull all the clips out by removal tool.
- Locate two screws held the tail light.
- Take out the screw by Phillips Head Screwdriver.
- Grab the light and pull it out.
- Identify the light components:
- Braking / Running / Turn Signal Light
- Side Marker Light
- Reverse Light
- Twist out all the sockets and pull out the bulbs.
- Pull out the tail lamp wiring harness.
- Install all original bulbs in the new light wire, twist the sockets back on the light.
- Drop the connector down the hole.
- Line up the installation pins and install new light on.
- Reinstall the two screws.
- Sort out the harness and hold it by the clips.
- Plug the tail light connector at the junction box.
FAQ
- What models are compatible with this tail light assembly?
- 2007-2013 GMC Sierra 1500, 2007-2010 GMC Sierra 2500 HD, and 2007-2010 GMC Sierra 3500 HD.
- What tools are necessary for the installation?
- The specific tools needed are not listed in the images provided. Typically, a Phillips Head Screwdriver and a removal tool for the clips would be required.
- Are the original bulbs reused in the new tail light assembly?
- Yes, the original bulbs are to be installed in the new light wire and secured by twisting the sockets back on the light.
- How is the new tail light secured to the vehicle?
- The new tail light is lined up with the installation pins and then secured by reinstalling the two screws.
TOOLS NEEDED
Installation Instructions
Documents / Resources
GMC 2007-2013 Sierra 1500 Tail Light [pdf] User Manual 2007-2013 Sierra 1500, 2007-2013 Sierra 1500 Tail Light, Tail Light, Light |