NETGEAR AXM761 ProSafe 10 Gigabit Ethernet SFP+ Module
Install Your Optical Module
The 10 Gigabit small form-factor pluggable (SFP+) module provides a full-duplex 10G bps in each direction for Ethernet operation on NETGEAR-managed switches. The switch will automatically detect the AXM761, so you can simply plug it into an available module slot. The module can be inserted or removed while the switch is operational.
Installing an AXM761 Module
Insert the module firmly into the slot that supports the SFP+ interface. Make sure the optical cable you use is a multi-mode LC to LC duplex cable.
Removing an AXM761 Module
Release the module latch by pulling down the handle bar across the module, and pulling the module out of the module slot.
Specifications
| Technical Specifications | |
| Standards | IEEE 802.3ae 10GBase-SR |
| Wavelength | 850nm |
| Dimensions (HxWxD) | 0.46” x 0.53” x 2.19”
(11.9 mm x 13.7 mm x 55.7 mm) |
| Weight | 17.1g |
| Operating Temperature | 32 -158º F (0 – 70ºC) |
| Storage Temperature | 32 -185 ºF (0 – 85ºC) |
| Operative relative humidity | 85% @ (25ºC) |
| Operating Distance | 2 – 300 m for 50/125 um MMF 2 – 33 m for 62.5/125 um MMF |
| Connectors | LC |
| Power Consumption | <1.0w |
| MTBF | 4,986,536 hr (569 years) |
| Safety Certification | UL 1950 CSA 22.2 No. 950 |
| Environmental Compliance | -RoHS |
Technical Support
Thank you for selecting NETGEAR products. After installing your device, locate the serial number on the label of your product and use it to register your product at http://www.NETGEAR.com/register. Registration is required before you can use our telephone support service. Registration via our website is strongly recommended. Go to http://kbserver.netgear.com for product updates and Web support. For Warranty and Regional Customer Support information, see the Warranty Card that came with your product.
Regulatory Compliance
Statement of Conditions
In the interest of improving internal design, operational function, and/or reliability, NETGEAR reserves the right to change the product described in this document without notice. NETGEAR does not assume any liability that may accrue due to the use or application of the product(s) or circuit layout(s) described herein.
Certificate of Manufacture/Importer
It is hereby certified the NETGEAR model AXM761 has been suppressed in accordance with the condition set out in MBPT-Amtsb|Vfg 243/1991 and vfg 46/1992. The operation of some equipment (for example, test transmitters) in accordance with regulation may, however, be subject to certain restrictions. Please refer to the note in the operating instructions. Federal Office for Telecommunications Approvals has been notified of the placing of this equipment on the market and has been granted the right to test the series for compliance with the regulation.
Note: This device has been tested and found to comply with limits for a Class B digital device, pursuant to part 15 of FCC rules. These limits are designed to provide reasonable protection against harmful interference in a commercial installation.
Laser Safety Warning
This is a Class 1 laser product.
Warning: Because invisible laser radiation may be emitted from the aperture of the port when no fiber cable is connected, avoid exposure to laser radiation and do not stare into the open aperture.
This symbol was placed in accordance with the European Union Directive 2002/96 on the Waste Electrical and Electronic Equipment (the WEEE Directive). If disposed of within the European Union, this product should be treated and recycled in accordance with the laws of your jurisdiction implementing the WEEE Directive.
Trademarks
© 2009 by NETGEAR, Inc. All rights reserved. NETGEAR and the NETGEAR logo are registered trademarks of NETGEAR, Inc. in the United States and/or other countries. Other brand and product names are trademarks or registered trademarks of their respective holders. Information is subject to change without notice.
FAQs
What is the NETGEAR AXM761 ProSafe 10 Gigabit Ethernet SFP+ Module?
The NETGEAR AXM761 is a 10 Gigabit Ethernet SFP+ (Small Form-Factor Pluggable) module that can be used with compatible NETGEAR networking equipment to provide high-speed network connectivity.
What is the purpose of the SFP+ module in a network setup?
SFP+ modules are used to expand the network connectivity options of compatible networking devices. The AXM761 module enables high-speed data transfer and is often used to connect network switches, routers, and other equipment.
Is the AXM761 module compatible with specific NETGEAR devices?
Yes, the AXM761 module is typically compatible with a range of NETGEAR devices that support SFP+ modules. It's important to check the compatibility list provided by NETGEAR to ensure it works with your equipment.
What is the data transfer speed supported by the AXM761 module?
The AXM761 module supports 10 Gigabit Ethernet speeds, making it ideal for high-performance data transfer and demanding network applications.
Does the AXM761 module support hot-swapping?
Yes, the AXM761 module typically supports hot-swapping, allowing you to replace or install it without shutting down your network equipment, as long as the device itself supports this feature.
Is it easy to install the AXM761 module into compatible networking equipment?
Installing the AXM761 module is generally straightforward. It's designed to be easily inserted into the SFP+ slot on compatible networking devices, and it often requires no additional configuration.
What are the advantages of using the AXM761 module in a network setup?
The AXM761 module provides high-speed data transfer and low latency, making it suitable for bandwidth-intensive applications, such as data centers, high-performance computing, and large-scale networks.
Is the AXM761 module suitable for long-distance network connections?
The AXM761 module is often designed for short-range connections within data centers or local networks. For longer-distance connections, you may need different modules or fiber optic solutions.
Does the module require any special configuration or driver installation?
In most cases, the AXM761 module requires no special configuration or driver installation. It should work seamlessly with compatible NETGEAR devices.
Is there a warranty for the AXM761 module?
The NETGEAR AXM761 ProSafe 10 Gigabit Ethernet SFP+ Module typically comes with a warranty of Limited Lifetime from the date of purchase.
Can I use multiple AXM761 modules in the same network setup?
Yes, you can often use multiple AXM761 modules in the same network setup to expand the number of 10 Gigabit connections available, providing scalability for your network.
Is the AXM761 module compatible with both single-mode and multi-mode fiber?
The compatibility of the AXM761 module with single-mode or multi-mode fiber may vary depending on the specific model. It's essential to check the product documentation to determine its fiber compatibility.
References: NETGEAR AXM761 ProSafe 10 Gigabit Ethernet SFP+ Module – Device.report
