NETGEAR WFS709TP ProSafe Smart Wireless Switch
Description
Reliable, Secure, Scalable Wireless Controller for Small and Mid-sized Businesses
The NETGEAR ProSafe Smart Wireless Switch is a full-featured wireless controller that centrally manages 16 access points, delivering integrated wireless mobility, security and converged services for both wired and wireless users. Supporting up to 256 users per ProSafe Smart Wireless Switch, the WFS709TP has built-in PoE support on all eight 10/100 interfaces.
With a Gigabit Ethernet port typically used to connect the Wireless Switch to the network backbone, WFS709TP supports advanced security features such as 802.1x, EAP-PEAP, EAP-TLS, EAP-TTLS, 802.11i, MAC address, SSID and location-based authentication. With identity-based security features such as support for RADIUS, LDAP and AAA server support, NETGEAR ProSafe Smart Wireless Switch truly unifies wired and wireless access without compromising on security.
Deployment
Deployed as an overlay on the existing network infrastructure, WFS709TP centrally manages, deploys, monitors and controls your wireless infrastructure. Supporting multiple deployment architectures including standalone switch deployments to hierarchical setups in master/local configurations, the NETGEAR ProSafe Smart Wireless Switch can be configured in “master” mode where all the configuration and security parameters are managed for the entire wireless network.
In addition, WFS709TP can be configured in “local” mode, acting as policy enforcement points for the “master” controller as part of a hierarchical setup. The overall Smart Wireless Switch Solution supports up to 32 access points with the Smart Wireless Switches configured in redundant master/local mode and up to 48 access points with the Smart Wireless Switches configured in non-redundant master/local configuration. A standalone Smart Wireless Switch supports up to 16 access points.
IntelliFi RF Management
Targeted towards the growing business NETGEAR ProSafe Smart Wireless Switch provides continuous wireless coverage with features such as IntelliFi radio management. IntelliFi radio management provides automatic self-configuration of all radio parameters including transmit power level, channel, load balancing, and interference avoidance. For low-latency applications such as VoIP, NETGEAR ProSafe Wireless Switch delivers VoIP over wireless by providing support for call admission control, voice-aware fast-roaming, and strict over-the-air QoS to deliver mobile voice capabilities.
Access Points
Wireless users on the network can now experience seamless roaming as moving between multiple access points is made simple with the ProSafe Smart Wireless Switch centralized architecture. All user states, including security and mobility information, are maintained in the centralized Smart Wireless Switch. Access points (AP’s) act as logical extensions to the WFS709TP, accepting wireless traffic and sending it to the Wireless Switch over IP tunnels.
Access points supported include NETGEAR ProSafe 802.11a/g Dual Band Light Wireless Access Point (WAGL102) and NETGEAR ProSafe 802.11g Light Wireless Access Point (WGL102). WFS709TP can also manage existing NETGEAR WG102 and WAG102 Wireless Access Point deployment by a one-time image download available on http://support.netgear.com that allows the existing wireless access point to be managed by the Wireless Controller.
RF Planning Tool
With integrated RF planning tools, administrators can input floor plan images, the number of floors, building dimensions, desired coverage and an overlap factor for fault tolerance. The planning tools compute the predicted RF characteristics of the building, plot the optimal location of the access points and display predicted coverage.
Guest Access and Redundancy
Guest access, provided by a built-in captive portal, allows guest users connecting over the wireless network to restrict guest-level access to the network, prohibiting them any access to the sensitive data on the corporate network. For mission-critical applications requiring network resiliency, WFS709TP supports fault-tolerant hardware with industry-standard N+1 wireless controller redundancy and access point interleaving for access point redundancy. These features make it possible to provide a wireless network with no single point of failure, guaranteeing the highest possible availability.
Connection
Technical Specifications
Physical Specifications
- Dimensions (h x w x d): 4.45 x 44.2 x 33 cm, (1.75 x 17.4 x 13 in)
- Weight: 4.5 kg (10 lb)
Hardware
- External power consumption: 200W
- Max. AC Input Voltage: 90-132V AC, 180-246V AC, AC
- Input frequency: 47-63Hz
- Memory: Flash/RAM – 256M, CompactFlash – 256M RAM
CPU
- LAN port 10/100: Eight, 10/100Base-T PoE ports and one, 10/100/1000Base-T uplink port
- Auto-MDIX-MDI-X
- Serial port: For serial console access only
- MTBF 5 years/43,800 hours
- LEDs to indicate power, port configuration, and activity
- Operating temperature: 0˚- 40˚ C
- Operating humidity: 10% – 70%
- Storage temperature: 0˚- 50˚ C
- Storage humidity: 5% – 95% RH
Wireless Switch Performance and Capacity
- Controlled access points: 16, supports 16 users each on average~
- NETGEAR ProSafe WGL102
- NETGEAR ProSafe WAGL102
- Users: 256
- MAC Addresses: 4096
- VLAN IP Interfaces: 128
- Fast Ethernet ports: 8
- Gigabit Ethernet ports: One 10/100/1000Base-T
- Total throughput: 1 Gbps
- Encrypted throughput (3DES & AES-CCM): 200 Mbps
Wireless LAN Security and Control Features
- 802.11i security (WFA certified WPA2 and WPA)
- 802.1x user and machine authentication
- EAP-PEAP, EAP-TLS, and EAP-TTLS support
- 802.11i PMK caching for fast-roaming applications
- EAP offload for AAA server scalability and survivability
- Stateful 802.1x authentication for standalone APs
- MAC address, SSID, and location-based authentication
- Multi-SSID support for operation of multiple WLANs
- SSID-based RADIUS server selection
- Secure AP control and management over IPSEC or GRE
- Simultaneous centralized and distributed WLAN support
Identity-Based Security Features
- Wired and wireless user authentication
- Captive portal; 802.1x and MAC address authentication
- Username, IP Address, MAC address, and encryption key binding for strong network identity creation
- Per-packet identity verification to prevent impersonation
- RADIUS and LDAP based AAA server support
- Internal user DB for AAA server failover protection
- Per-user session accounting for usage auditing
- Configurable acceptable use policies for guest access
Convergence Features
- Voice and data on a single SSID for convergence devices
- Flow-based QoS using Voice Flow Classification (VFC)
- SIP, Spectralink SVP, Cisco SCCP, and Vocera ALG
- Strict priority queuing for over-the-air QoS
- DiffServ marking and 802.1p support for network QoS
- On-hook and off-hook VoIP client detection
- VoIP call admission control (CAC) using VFC
Call reservation thresholds for mobile VoIP calls - Voice-aware RF management for ensuring voice quality
- Fast-roaming support for ensuring voice quality
- SIP early media and ring tone generation (RFC 3960)
- Per-user and per-role rate limits (Bandwidth contracts)
IntelliFi Radio Management Features
- Automatic channel and power settings for controlled APs
- Simultaneous air monitoring and end-user services
- Self-healing coverage based on dynamic RF conditions
- Dense deployment options for capacity optimizations
- AP load balancing based on the number of users
- Coverage hole and RF interference detection
- 802.11h support for radar detection and avoidance
Wireless Intrusion Protection Features
- Integration with wireless infrastructure
- Simultaneous or dedicated monitoring capabilities
- Rogue AP detection and built-in location visualization
Networking Features and Advanced Services
- L2 and L3 switching over the air and over the wire
- VLAN pooling for easy, scalable network designs
- VLAN mobility for seamless L2 roaming
- Proxy Mobile IP and proxy DHCP for L3 roaming
- Built-in DHCP server and DHCP relay
- VRRP-based N+I controller redundancy (L2)
- AP provisioning-based N+I controller redundancy (L3)
- 802.1d Spanning Tree Protocol
Wireless Switch Management Features
- RF planning and AP deployment toolkit
- Centralized AP provisioning and image management
- Live coverage and visualization heat maps
- Detailed statistics visualization for monitoring
- Remote packet capture for RF troubleshooting
- Interoperable with Ethereal®, Airopeek, and AirMagnet© analyzers
- Multi-controller configuration and management
- Location visualization and device tracking
- System-wide event collection and reporting
Wireless Switch Administration Feature
- Web-based user interface access over HTTP and HTTPS
- Quickstart screens for easy controller configuration
- Restricted CLI access using console, disabled by default CLI access, SSH, and telnet console
- Role-based access control for restricted admin access
- Authentication access via RADIUS, LDAP, or internal DB
- SNMPv3 and SNMPv2 for controller monitoring
- Standard MIBS and private enterprise MIBS
- Detailed message logs with syslog event notification
Regulatory and Safety Compliance
- CE mark (external AC/DC power supplies)
- PSE Mark (external AC/DC power supplies)
- Underwriters Laboratories (UL) 60950
- Canadian Standards Association (CAN/CSA) C22.2 No. 60950
- EN 60950 / IEC 60950 CB Scheme
- FCC Part 15 Class A
- VCCI Class A
- AS/NZS CISPR 22 Class A
- AS/NZS4771 (C-Tick)
Warranty
- NETGEAR Lifetime Warranty†
ProSupport™ Service Packs Available
- On Call 24 x 7
- PMB0331-100 (US)
- PMB0331 (non-US)
- Xpress HW
- PRR0331
Package Contents
ProSafe Smart Wireless Switch (WFS709TP)
- Brown box packing
- Power cord
- Resource CD
- Serial console cable
- Rack-mount kit
- Ethernet RJ-45 Cat 5 cable – DB9 – RJ45 adapter
- Support information card
- Warranty card
Ordering Information
WFS709TP
- North America: WFS709TP – 100NAS
- Europe: WFS709TP – 100EUS
- Asia/Pacific: WFS709TP – 100AUS
WAGL102
- North America: WAGL102-100NAS
- Europe: WAGL102-100EUS
- Asia/Pacific: WAGL102-100AUS
WGL102
- North America: WGL102-100NAS
- Europe: WGL102-100EUS
- Asia/Pacific: WGL102-100AUS
FAQs
What is the NETGEAR WFS709TP ProSafe Smart Wireless Switch?
The NETGEAR WFS709TP is a ProSafe Smart Wireless Switch designed to provide centralized control and management of wireless access points (APs) in a network. It offers features for enhanced security and efficient management of wireless networks.
What are the key features of the NETGEAR WFS709TP wireless switch?
Key features of the NETGEAR WFS709TP include centralized management of wireless APs, support for multiple SSIDs, VLAN support, enhanced security features, and easy-to-use web-based management.
How many wireless access points (APs) can the WFS709TP manage?
The NETGEAR WFS709TP can typically manage up to a specified number of wireless access points, which may vary depending on the model and firmware version. Be sure to check the product documentation for the exact number of supported APs.
Is the WFS709TP suitable for small businesses or large enterprises?
The NETGEAR WFS709TP is designed to cater to the needs of small and medium-sized businesses, making it suitable for managing wireless networks in such environments. For larger enterprises, NETGEAR offers more advanced solutions.
Does it support Power over Ethernet (PoE) for APs?
Yes, the WFS709TP typically supports Power over Ethernet (PoE) to provide power to connected APs over the Ethernet cables, simplifying installation and reducing the need for additional power sources.
What is the maximum number of Virtual LANs (VLANs) it can handle?
The NETGEAR WFS709TP typically supports a specified number of VLANs to segment and manage network traffic. Refer to the product specifications for the exact number of supported VLANs.
Is there support for guest networks and captive portals?
Yes, the WFS709TP often supports the creation of guest networks and captive portals, allowing you to provide controlled internet access for guests and visitors while maintaining security.
Can I manage the WFS709TP remotely?
Yes, the NETGEAR WFS709TP typically supports remote management, enabling you to monitor and configure the wireless switch and connected APs from a remote location using web-based management tools.
What security features does the WFS709TP offer?
The WFS709TP typically offers a range of security features, including WPA and WPA2 encryption, MAC address filtering, rogue AP detection, and wireless intrusion detection, to help secure your wireless network.
Is it compatible with third-party wireless access points?
The NETGEAR WFS709TP is designed to work seamlessly with NETGEAR wireless access points. While it may work with third-party APs, full compatibility and feature support are best ensured with NETGEAR APs.
What is the warranty coverage for the WFS709TP wireless switch?
The NETGEAR WFS709TP ProSafe Smart Wireless Switch typically comes with a warranty of Limited Lifetime from the date of purchase.
Does it support Quality of Service (QoS) for traffic prioritization?
Yes, the NETGEAR WFS709TP often includes Quality of Service (QoS) features to prioritize and manage network traffic based on application and service requirements.
Is the setup and configuration of the WFS709TP user-friendly?
Yes, the WFS709TP is typically designed with user-friendly setup and configuration tools, including a web-based management interface, to simplify the deployment and management of wireless networks.
References: NETGEAR WFS709TP ProSafe Smart Wireless Switch – Device.report
