GoPro Protective Housing for HERO9 Black User Manual
Inserting the Camera
Tethering the Housing
Heads Up: Tether sold separately.
1. With the camera powered on, hold down the Mode button 
and press the Shutter button 
.
2. Use the Mode button to cycle through the presets.
3. Press the Shutter button to select a preset.
4. To exit, press and hold the Shutter button, or cycle to Done in the menu.
Cleaning Your Housing
CLEANING THE LENS
Keep the lens clean by wiping it with a soft, damp cloth if it comes in contact with food, lotion, ink, or anything that could cause a stain. Do not use window cleaners, household cleaners, solvents, alcohol, or anything abrasive.
CLEANING THE RUBBER SEAL
A single hair or grain of sand on the housing’s seal can cause a leak that may impact image and sound quality. Clean the seal by removing it from the housing, rinsing it in fresh water, and shaking it dry (drying it with a cloth may cause lint to damage the seal). After using the housing in salt water, rinse it with fresh water to prevent corrosion.
Using the Skeleton Backdoor
Switch to the Skeleton Backdoor when you want to access the touch screen and record better audio.
The Skeleton Backdoor is not recommended for underwater use
DOWNLOAD
GoPro Protective Housing for HERO9 Black User Manual – [Download PDF]
