Polk-Audio-logo

Polk Audio DB652 Coaxial Car Audio Speaker

Polk-Audio-DB652-Coaxial-Car-Audio-Speaker-Product

Getting Started

Please inspect your loudspeakers carefully. Notify your Polk dealer if you notice any damage or missing items. Keep the carton and packing material; this will do the best job of protecting your loudspeakers if they must be transported.

Safe Limits of Operation

Damage to loudspeakers can occur when an amplifier, regardless of its wattage, is made to play at higher listening levels than it can produce at low distortion levels. This is usually beyond the “noon or 1 o’clock” position on the volume control. Operation at this level can result in very high levels of audible distortion originating in the amplifier, which can add a harsh, gritty sound to your listening material. Contrary to popular belief, a loudspeaker is more likely to be damaged by trying to get too much volume from a low-powered amplifier or receiver than from a high-powered one

Technical Assistance or Service

If, after following the hookup directions, you experience difficulty, please double-check all wire connections. Should you isolate the problem to the loudspeaker, contact the authorized Polk dealer where you made your purchase, or contact Polk Customer Service at 800-377-7655 (M-F, 9-5:30 EST, US only) or via email at polkcs@polkaudio.com. Outside the US, call 410-358-3600. More detailed information—including audio how-to articles, FAQs, and online manuals—is available on our website www.polkaudio.com.

Product Disposal

Certain international, national, and/or local laws and/or regulations may apply regarding the disposal of this product. For further detailed information, please contact the retailer where you purchased this product or the Polk Importer/Distributor in your country. A listing of Polk Importer/ Distributors can be found on the Polk website www.polkaudio.com or by contacting Polk at 1 Viper Way, Vista, California 92081 USA—Phone: +1 800-638-7276.

Polk-Audio-DB652-Coaxial-Car-Audio-Speaker-FIG-1

Wiring Diagrams

Figure 1
Basic coaxial connection

Polk-Audio-DB652-Coaxial-Car-Audio-Speaker-FIG-2

Figure 2
Basic component connection installing DB 5252, DB 6502

Polk-Audio-DB652-Coaxial-Car-Audio-Speaker-FIG-3

Installation Guide

Figure 3: Installing DB 402, DB 522, DB 652, DB 5252 & DB 6502 round models

Polk-Audio-DB652-Coaxial-Car-Audio-Speaker-FIG-4

Figure 4: installing DB 402, DB 522, DB 652, DB 5252 & DB 6502 round models with grille

Polk-Audio-DB652-Coaxial-Car-Audio-Speaker-FIG-5

Figure 5: spacer/adapter bracket (for DB 652 / DB 6502 installation only)

Polk-Audio-DB652-Coaxial-Car-Audio-Speaker-FIG-6

Some applications may require using the additional spacer/adapter bracket.

Figure 6 Installing DB 462 & DB 572 oval models

Polk-Audio-DB652-Coaxial-Car-Audio-Speaker-FIG-7

Figure 7 Installing DB 692 oval model with grille

Polk-Audio-DB652-Coaxial-Car-Audio-Speaker-FIG-8

Figure 8 Crossover mounting allows for ventilation clearance.

Polk-Audio-DB652-Coaxial-Car-Audio-Speaker-FIG-9

Figure 9 (DB5252)

Polk-Audio-DB652-Coaxial-Car-Audio-Speaker-FIG-10

Tweeter attenuation switch a 3-position switch (0db, +3db, +6db) allows you to adjust the tweeter level for the tonal balance that’s right for your car and system.

Figure 10 DB 5252, DB 6502

Polk-Audio-DB652-Coaxial-Car-Audio-Speaker-FIG-11

Flush mount tweeter mounting

  1. Check for proper clearance: The flush mount kit is 1” (26mm) deep.
  2.  Mark the center of the spot and cut a 2” (50.8mm) diameter hole using a hole saw, drill bit, or razor knife.
  3. Assemble the cup, clamp, and machine screw loosely as shown.
  4. Route wires through the round opening in the bottom of the cup.
  5. Press the assembly into the 2” (50.8mm) diameter hole until the clamp edge is below the mounting surface, then tighten the screw. The legs of the clamp can be bent outward by inserting a screwdriver through the holes in the cup while still mounted.
  6. Connect wires from the tweeter terminals of the Crossover to the tweeter itself using the fast-on connectors. Connect the red wire from the (+) terminal of the Crossover tweeter output to the red (+) wire from the tweeter.
  7. Mount the tweeter by snapping it into the mounting cup.
Figure 11 DB 5252, DB 6502

Polk-Audio-DB652-Coaxial-Car-Audio-Speaker-FIG-12

Surface mount tweeter mounting

  1. Using the base of the surface mount cup as a template, mark the screw hole and drill them using a 1/8” (3mm) drill bit. Drill a second hole (for the speaker wire) using a 3/16” (5mm) drill bit.
  2. Screw the surface mount cup to the panel.
  3. Push the tweeter wires through the open area at the bottom of the cup and the 3/16” (5mm) hole in the panel.
  4. Connect wires from the tweeter terminals of the Crossover to the tweeter wires using fast-on connectors. Be sure to connect the red wire strand from the tweeter to the (+) terminal of the crossover tweeter output.
  5. Mount the tweeter by snapping it into the mounting cup.

DB Plus Series Specifications

DB Plus Series Coaxial and Component Systems

DB Model Type Driver Complement (inches & mm) Tweeter Complement (inches & mm) Mounting dimensions Mounting depth (top) Mounting depth (bottom) Peak Power Handling (W) Continuous Power Handling (W) Nominal Impedance (ohm) Frequency Response (Hz) Grille Height Sensitivity (dB)
DB 402 4″ coaxial 4″ 101.60 mm 0.75″ 20 mm 110.8 x 7 inches 7 inches 46 mm 90 45 4 107-20K 14.07 88
DB 522 5.25″ coaxial 5.25″ 133.35 mm 0.75″ 20 mm 139.8 x 7.7 inches 7.7 inches 45 mm 90 45 4 90-20K 17.55 91
DB 652 6.5″ coaxial 6″ 152.4 mm 0.75″ 20 mm 155.2 x 11.3 inches 11.3 inches 45.5 mm 120 60 4 75-20K 20 91
DB 462 4″ x 6″ coaxial 4″ x 6″ 101.6 mm x 152.4 mm 0.75″ 20 mm 78.4 x 4 inches 4 inches 46 mm 80 40 4 110-20K n/a 90
DB 572 5″ x 7″ coaxial 5″ x 7″ 127 mm x 177.8 mm 0.75″ 20 mm 107.5 x 8.4 inches 8.4 inches 57 mm 120 60 4 70-20K n/a 92
DB 692 6″ x 9″ coaxial 6″ x 9″ 152.4 mm x 228.6 mm 0.75” + 0.5″ 20 mm + 13 mm 120.1 x 16.8 inches 16.8 inches 82 mm 250 125 4 55-20K 22.94 91
DB 5252 5.25″ component 5.25″ 133.35 mm 0.75″ 20 mm 139.8 x 7 inches 7 inches 45 mm 200 100 4 85-20K 17.55 89
DB 6502 6.5″ component 6.5″ 152.4 mm 0.75″ 20 mm 155.2 x 10.8 inches 10.8 inches 45.5 mm 200 100 4 70-20K 20 90

Limited Warranty

Polk Audio, Inc. warrants the original purchaser only that this Polk DB Product (the Product) will be free from defects in materials and workmanship for a period of (1) one year from the date of original retail purchase from a Polk Authorized Dealer. However, this warranty will automatically terminate before the expiration of the (1) one-year period if the original retail purchaser sells or otherwise transfers the Product to any other party. The original retail purchaser shall hereinafter be referred to as “you.” To allow Polk to offer the best possible warranty service, please fill out the Product Registration Card(s) and send them to the Factory at the address provided in the Registration Card within (10) 10 days of the date of purchase.

Defective Products must be shipped, together with a proof of purchase, prepaid insured to the Authorized Polk Dealer from whom you purchased the Product, or to 1 Viper Way, Vista, California 92081. Products must be shipped in the original shipping container or its equivalent; in any case, the risk of loss or damage in transit is to be borne by you. If, upon examination at the Factory or Polk Authorized Dealer it is determined that the unit was defective in materials or workmanship at any time during the Warranty period, Polk or the Polk Dealer will, at its option, repair or replace this Product at no additional charge, except as set forth below. All replaced parts and Products become the property of Polk.

Products replaced or repaired under this Warranty will be returned to you, within a reasonable time, freight prepaid. This Warranty does not include service or parts to repair damage caused by accident, disaster, misuse, abuse, negligence, inadequate packing or shipping procedures, commercial use, voltage inputs over the rated maximum of the unit, cosmetic appearance of the cabinetry not directly attributable to defects in materials or workmanship, or service, repair, or modifications of the Product which has not been authorized or approved by Polk. This Warranty is instead of all other expressed Warranties.

If this Product is defective in materials and workmanship as warranted above, your sole remedy shall be repair or replacement as provided above. In no event will Polk Audio, Inc. be liable to you for any incidental or consequential damages arising out of the use or inability to use the Product, even if Polk Audio, Inc. or a Polk Dealer has been advised of the possibility of such damages, or any other claim by any other party. Some states do not allow the exclusion or limitation of consequential damages, so the above limitation and exclusion may not apply to you. This Warranty gives you specific legal rights which may vary from state to state.

This warranty applies only to Products purchased in the United States of America, its possessions, and U.S. and NATO armed forces exchanges and audio clubs. The Warranty terms and conditions applicable to Products purchased in other countries are available from the Polk Authorized Distributors in such countries. Viper Way Vista, CA 92081 800-638-7276 www.polkaudio.com

FAQs

What is the Polk Audio DB652 Coaxial Car Audio Speaker?

The Polk Audio DB652 is a coaxial car audio speaker designed to provide high-quality sound performance in a car audio system.

What is the speaker's size?

The DB652 speaker is typically 6.5 inches in diameter, making it a common size for car audio applications.

What is the power handling capability of the DB652 speaker?

The power handling capability can vary, but the DB652 speakers are often rated to handle up to 300 watts of peak power.

Do these speakers come as a pair or individually?

The DB652 speakers are commonly sold as a pair, providing you with two speakers for stereo sound.

Are these speakers easy to install in a car audio system?

Yes, the DB652 speakers are typically designed for straightforward installation and may come with installation hardware and instructions.

Do these speakers provide clear and balanced sound quality?

The DB652 speakers are often praised for providing clear and balanced sound with good audio quality.

Can I use these speakers as replacements for my car's factory speakers?

Yes, these speakers are commonly used as replacements for factory speakers, offering improved sound quality.

What is the impedance of the DB652 speakers?

The impedance of the DB652 speakers may vary, but they are often rated at 4 ohms, which is a standard impedance for car speakers.

Are these speakers suitable for use with an external amplifier?

Yes, the DB652 speakers can be used with an external amplifier to enhance their performance further.

Do these speakers come with grilles or covers?

Yes, the DB652 speakers typically come with grilles or covers to protect the speaker components and enhance their appearance.

What should I do if I encounter issues with the DB652 speakers?

If you experience any problems or have questions about the speakers, consult the user manual or contact Polk Audio customer support for assistance and troubleshooting.

Download this PDF Link: Polk Audio DB652 Coaxial Car Audio Speaker Owner’s Manual

References

Leave a comment

Your email address will not be published. Required fields are marked *