L Shaped Computer Desk
Instruction Manual
D-L02-49IN HJ-Customer-Service@outlook.com
(909)637-7665 | (909)637-7593
EST 9:00AM–17:00PM
Component List
Supplied Parts and Hardware
ATTENTION:
- Please do not wipe the desk with corrosive liquids.
- Please keep the parts properly to avoid contact and accidental ingestion by children.
- Please do not place overheated kitchenware and cutlery to avoid damage to the table.
Step 1
Use the Wrench ⑥ and Screws ① * 4 to connect the Crossbeam G * 2 and Legs E * 1 and F * 1 respectively.
NOTE: Note the Orientation of Crossbeam G holes.
Step 2
Connect the Crossbeam I * 1 to the Legs F * 1 and D * 1 using the Wrench ⑥ and Screws ① * 2.
NOTE:
- The orientation of hole I on the crossbeam.
- The hole orientation for legs F and D.
Step 3
First, connect Bar L*1 and Leg F*1 and D*1 respectively with Wrench ⑥ and Screw ②*4, and then tighten the center screw of Bar L*1 by 100%.
Step 4
Use Wrench ⑥ and Screw ①*2 to connect Crossbeam H*1 and Crossbeam I*1 and Leg E*1 respectively.
NOTE:
- The screws are only tightened by 50%.
- Pay attention to the orientation of the H-hole on the crossbeam.
Step 5
First, connect Bar K*1 and legs E*1 and F*1 respectively with Wrench ⑥ and Screw ②*4, and then tighten the center screw of Bar K*1 by 100%.
Step 6
Use the Wrench ⑥ and Screws ① * 5 to connect Table A * 1 and Legs F * 1 and D * 1 respectively.
NOTE:
- The screws are only tightened by 50%.
- Ensure that the frame structure is flush when installing the desktop board.
Step 7
Use Wooden Pins ④*2 as well as Wrench ⑥ and Screws ①*5 to connect Table Board B*1 and legs E*1 and F*1 respectively, using Hole Stickers ⑦*2 to cover the exposed screw holes in the plate.
NOTE:
- The screws are only tightened by 50%.
- Ensure that the frame structure is flush when installing the desktop board.
Step 8
First, use Wrench ⑥ to unscrew the screws attached to the top of Leg E and Crossbeam H. Then use Wrench ⑥ and Screw ①*2 and Nut ③*1 to attach the Felt Bag M*1 to Leg E. Use Wrench ⑥ and Screw ①*2 to connect the Tabletop C*1 and Leg J*2. Finally, use Wrench ⑥ and Screw ⑤*2 again to attach Tabletop C*1 to either side of either of the two legs (E and F).
Step 9
Tighten all screws in steps 4, 6, and 7 from 50% to 100% and fully lock them.
NOTE:
Make sure all Bolts are 100% tightened before use.
You can choose another installation method customize the placement as your habit.
Step 1
Use the Wrench ⑥ and Screws ① * 4 to connect the Crossbeam G * 2 and Legs E * 1 and F * 1 respectively.
NOTE: Note the Orientation of Crossbeam G holes.
Step 2
Connect the Crossbeam I * 1 to the Legs F * 1 and D * 1 using the Wrench ⑥ and Screws ① * 2.
NOTE:
- The orientation of hole I on the crossbeam.
- The hole orientation for legs F and D.
Step 3
First, connect Bar L*1 and Leg F*1 and D*1 respectively with Wrench ⑥ and Screw ②*4, and then tighten the center screw of Bar L*1 by 100%.
Step 4
Use Wrench ⑥ and Screw ①*2 to connect Crossbeam H*1 and Crossbeam I*1 and Leg E*1 respectively.
NOTE:
- The screws are only tightened by 50%.
- Pay attention to the orientation of the H-hole on the crossbeam.
Step 5
First, connect Bar K*1 and legs E*1 and F*1 respectively with Wrench ⑥ and Screw ②*4, and then tighten the center screw of Bar K*1 by 100%.
Step 6
Use the Wrench ⑥ and Screws ① * 5 to connect Table A * 1 and Legs F * 1 and D * 1 respectively.
NOTE:
- The screws are only tightened by 50%.
- Ensure that the frame structure is flush when installing the desktop board.
Step 7
Use Wooden Pins ④*2 as well as Wrench ⑥ and Screws ①*5 to connect Table Board B*1 and legs E*1 and F*1 respectively, using Hole Stickers ⑦*2 to cover the exposed screw holes in the plate.
NOTE:
- The screws are only tightened by 50%.
- Ensure that the frame structure is flush when installing the desktop board.
Step 8
First, use Wrench ⑥ to unscrew the screws attached to the top of Leg E and Crossbeam H. Then use Wrench ⑥ and Screw ①*2 and Nut ③*1 to attach the Felt Bag M*1 to Leg E. Use Wrench ⑥ and Screw ①*2 to connect the Tabletop C*1 and Leg J*2. Finally, use Wrench ⑥ and Screw ⑤*2 again to attach Tabletop C*1 to either side of either of the two legs (E and F).
Step 9
Tighten all screws in steps 4, 6, and 7 from 50% to 100% and fully lock them.
NOTE: Make sure all Bolts are 100% tightened before use.
Technical Support
(909)637-7665 | (909)637-7593
Other Info
HJ-Customer-Service@outlook.com
Thank you for choosing this product. We strive to provide you with the best quality products and services in the industry. Should you have any issues, please don’t hesitate to contact us.
Documents / Resources
DUMOS D-L02-49IN Shaped Computer Desk Wood Corner PC Gaming Table [pdf] Instruction Manual D-L02-49IN Shaped Computer Desk Wood Corner PC Gaming Table, D-L02-49IN, Shaped Computer Desk Wood Corner PC Gaming Table, Computer Desk Wood Corner PC Gaming Table, Wood Corner PC Gaming Table, PC Gaming Table, Gaming Table |