GR3
Technical Description
Editor : X. Gong
Department : SDYE-A-SH
Tel. : 86 21 58973302- 9412
Fax. :
Email : Xun.gong@marquardt.com
Original version : 07.25.2023
Revision : 07.25.2023
Version : 1.0
Functional description
The GR3 (NFC reader) is a component of a driving authorisation system of a car.
When the authorized digital key is close to GR3, it sends authorization data to the control unit to execute the access request like Door lock/unlock.
NFC Reader PCB is fixed on decoration board through four location holes by hot melting plastic pins on the decoration board. The decoration board is then installed at driver side window frame in car.
This device is not freely available on the market and is installed only by trained specialized personnel from the car manufacturer.
To avoid risk of fire, please just connect the product to a power supply of which output capability is less than 15W.
Technical Data:
Operating Voltage: 9 ~ 16v DC
Operating temperature: -40 ~ +85 degree
PCB dimension: 76.2*145.5*2 mm
Frequency: 13.56MHz
FCC Regulations:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Caution:
- Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
ISED Notice
(1) This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:
1) this device may not cause interference, and
2) this device must accept any interference, including interference that may cause undesired operation of the device.
(2) This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter, except tested built-in radios.
(3) The County Code Selection feature is disabled for products marketed in the US/ Canada.
Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an uncontrolled Technical Description GR1
environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
Documents / Resources
 |
MARQUARDT GR3 Driving Authorisation System [pdf] User Manual GR3 Driving Authorisation System, GR3, Driving Authorisation System, Authorisation System |
