Gaoxun-LOGO

Gaoxun RO3MW-3 3M Neon Rope Light

Gaoxun-RO3MW-3-3M-Neon-Rope-Light-FIG-1

Package Contents

Gaoxun-RO3MW-3-3M-Neon-Rope-Light-FIG-2

Specifications

  • Model R03MW-3
  • Power Supply AC100-240V DC24V-1.5A
  • Dlmenslons 9.84ft
  • Water Resistance IP20
  • Control Method PC/Mobile App.Control Box
  • Luminou1 power 28W
  • WiFi IEEE 802.11 b/g/n
  • Operating Frequency 2.412-2.484GHz
  • Suppart System
    • Android 5.5 or iOS 9.0 and above
    • Wndows 10(x64) and above

lnstalllng Staps

Gaoxun-RO3MW-3-3M-Neon-Rope-Light-FIG-3

  1. Wipe the surface to make sure It’s clean and dry.

    Gaoxun-RO3MW-3-3M-Neon-Rope-Light-FIG-4

  2. Paste the adhesive tape to the dips. and tear off the film. You can stick the c6p to the place you want and press it firmly (if necassm-y, you c:an reinforce the c:lip with a scn,w), and then put the rope light into the clip.
    Notes:
    The adhesive tape can be paste to the bottom !!Ind side of fixing clips according to appllcatlon.

    Gaoxun-RO3MW-3-3M-Neon-Rope-Light-FIG-5
    Tips

    • Meke sure the surface of installation is dry and clean, especially oil free for glass.
    • Firmly and carefully press the strip after sticking.
    • It is suggested to stick one clip every 15cm.
    • For better stability, achesive tape can only be used once.
  3. Adhesive tape ls avallable for the control box, you could use It to stick control box and attach It ta the desk.

    Gaoxun-RO3MW-3-3M-Neon-Rope-Light-FIG-6

  4. Power on the rope Dght and start using.

    Gaoxun-RO3MW-3-3M-Neon-Rope-Light-FIG-7

Tips for cutting Rope Light:

  • Compare the rope light to the desk edges and determine the final length you want.
  • Carefully cut along the indicator spot that does not surpass the end with scissors.
  • Put the end cap onto the end of the rope li!trt. Power on and check if it lights up.

    Gaoxun-RO3MW-3-3M-Neon-Rope-Light-FIG-8
    Gaoxun-RO3MW-3-3M-Neon-Rope-Light-FIG-9
    Notes:

    • Please calibrate the length of the light when connecting to the ,pp.
    • Can be cut on any of 30 specific cutting points and resized to ensure a perfect fit for most desks, with a usable length between 1.Sm-3m.
    • Support 10mm minimum width.

Operation description on the PC

  1. Please download the “‘LINKLITE” app from https://www.linklile-iot.com/products_detail/4.html

    Gaoxun-RO3MW-3-3M-Neon-Rope-Light-FIG-10

  2. Register an account and login in.
  3. Tap + to add device after log in.

    Gaoxun-RO3MW-3-3M-Neon-Rope-Light-FIG-11

  4. Comectto 2.4GHz:Wi-Fi network and folow steps to add devices.
  5. EnterWi-Fi SSID name and password.

    Gaoxun-RO3MW-3-3M-Neon-Rope-Light-FIG-12

  6. Search device and connect.
  7. Device added.

    Gaoxun-RO3MW-3-3M-Neon-Rope-Light-FIG-13

Download Rino Smart App
Rino Smart App allows you to control and customize your controls for Rope Light via your smart device, Search for the latest version on Apple App store or Google Play.

Gaoxun-RO3MW-3-3M-Neon-Rope-Light-FIG-14

Pairing Your Device with the Rina Smart App What You Need

  • Device supports the 2.4GHz and 802.11 b/g/n bands only. 5GHz is not supported.
  • A smart phone or tablet running Android 5.5 or iOS 9.0 and above.

Pairing Instructions

  1. Download the “Rino Smart” app from the APP Store or Google Play.
  2. Register an accounl and log in, allow the app to use Bluetooth.
  3. Connect to 2.4GHz Wi-Fi network and tum Bluetooth on from your mobile phcne.
  4. Olllrge and pres& Power Button to tum on the control box, and then long press Power Button for 5 seconds until the light flashing and going into pairing made.
  5. After completing the above operation instructions, tap the”+” icon at the top right corner of Smart Home homepage., then click “Add Device”.
  6. Click the device iccn when it show up, then click again “+”  next to the icon.

    Gaoxun-RO3MW-3-3M-Neon-Rope-Light-FIG-15

  7. Then enter2.4GHz Wi-Fi SSID Name and password as requied, and press “next” to complete the process.

    Gaoxun-RO3MW-3-3M-Neon-Rope-Light-FIG-16
    Tips
    If you have ah3ady downloaded the “RinoSmert” App and registered the account. you can skip step1 and step 2.

Troubleshooting

  1. Cannot connect to Bluetooth.
    • Ensure Bluetooth on your smart phone has been turned an.
    • Your smart phone may be incompatible with the Rino Sm•t app. Try using l!I different smart phone then reconnect.
    • Power the Rope Light and your smart phone Bluetooth off then on, then try again.
    • Ensure that your smart phone is within 1m/3.28ft of the control box when connecting.
  2. The Rope Light does not display the full selected color/some LED beads do not light up.
    Please contact the support team for rapid product replacement.
  3. Cannot connect to Wi-Fi.
    • Do not skip the Wi-Fi connecting steps in the app.
    • 5GHz network is not supported. Please set the router to 2.4GHz and then reset it.
    • Connect your phone to Wi-Fi and check whether the network works well.
    • Make sure you have entered the correct Wi-Fi name and password.
    • Change your Wi-Fi password to a brief one. 8 numbers and letters are suggested.

Customer Service

FCC Radiation Exposure Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. this devicc may not causc harmful interference, and
  2. this device must accept any interference received, including interference that may cause undesired operation. changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rulcs. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This quipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarante that interference will not occur in a particular installation.If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the cquipment off and on, the user isencouraged to try to correct the interference by one or more of the following mcasures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the cquipment and receiver,
  • Connect the quipment into an outlet on a circuit different from that to which the receiver is connected
  • Consult the dealer or an experienced radio/TV technician for help.

NOTE: This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter The device has been evaluated to meet general RF exposure requirement, This equipment should be installed and operated with a minumum distance of 20 cm between the radiator and your body.

ABOUT COMPANY

  • Manufacturer: Shenzhen Linklite Smart Lighting Co., Ltd.
  • Address: 302, Building 4, Rongcheng Scientific Research Town, Xinfeng Road, Sunshine Community, Xili Street, Nanshan District, Shenzhen, Guangdong Province, China

Documents / Resources

Gaoxun RO3MW-3 3M Neon Rope Light [pdf] Instruction Manual
RO3MW-3 3M Neon Rope Light, RO3MW-3, 3M Neon Rope Light, Neon Rope Light, Rope Light

References

Leave a comment

Your email address will not be published. Required fields are marked *