MONSTER MOW7-1005-ICM Smart RGB Plus IC Flow Flexible Neon Light Strip
GETTING STARTED
Thank you for choosing this Smart RGB+IC Flow Neon Light Strip This Quick Start Guide will help you with setup and installation of your device.
WHAT’S IN THE BOX
- 16.4ft/5m Neon Flow LED Strip
- 1 set – Mounting Clips and Screws
- 24V 1A Power Adapter
- Quick Start Guide
WHAT DO YOU NEED?
- WI-Fi router with 2.4GHz 802.11 network
- Mobile device running Android 9.0 Pie or higher / IOS 12 or higher, with Bluetooth and location-enabled
- Monster Smart Lighting app on your mobile device
TIP: Do you know your Wi-Fi network name and password? Write it down now if It’s hard to remember.
ANYTHING ELSE?
This light strip is IP65 water-resistant and is suitable for both indoor and outdoor use. The controller is rated IP44 water resistant and the power adapter is not water resistant.
To ensure maximum water protection:
- The power adapter must be connected to a GFCI-protected hooded flush-type cover plate receptacle marked “Wet Location” while in use outdoors.
- Ensure that the power adapter connection is tightly sealed.
TIP: Save these instructions for future reference.
SETUP
Remove all components from the box. It is recommended to first pair your device in a location close to your router BEFORE installation.
NOTE: If desired, you can operate the device with the controller and without pairing to Wi-Fi and without the app. Advanced features like colour customization, scheduling, and voice control will not be available. (See “How To Use” on page 6)
STEP 1
Download the free Monster Smart Lighting app from the App Store (for iPhone) or Google Play Store (for Android phones). Open the Monster Smart Lighting app and create an account by following the on-screen instructions.
STEP 2
Before you start, we need to set up a few things for a smooth pairing process:
- Make sure your phone or tablet is successfully connected to the 2.4GHz WI-FI network that your device will be placed on.
- Enable Bluetooth and location – To find pairable devices and successfully connect them with your home network, you must allow access to location services when prompted
NOTE
Most Smart devices only set up on a 2.4GHz Wi-Fi network for longer ranges and transmission through walls. Many newer home Wi-Fi networks are mixed networks that are set to 5GHz by default (ex: AT&T, Verizon) and you may need to access your router settings and/or call your Internet Service Provider to create a separate 2.4GHz network.
NOTE: To prevent overheating, uncoll the light strip before use. Do not operate the Neon light strip while it is coiled up as it was in the packaging as this may cause damage to the product.
STEP 3
Connect and plug in the included power adapter and the light should turn on. Your device will power on into a dynamic lighting mode and can be controlled by pressing the button on the controller. To enter pairing mode or reset the device at any time, press and hold the button for 8 seconds.
STEP 4
In the Monster Smart Lighting app, select the “+” and then “device” to add a new device. Allow permissions when prompted. Follow the on-screen instructions to add your device.
STEP 5
Once the pairing process is complete, your device will receive any available updates from the network. Please Note: Installing the newest and best features may take up to 5 minutes.
CONGRATULATIONS!
Your device is now connected and ready to use. You can use the app to adjust settings, create custom lighting effects, set schedules, set up voice control, and more!
Note: Now that the setup is complete, your mobile device no longer needs Bluetooth enabled or to stay on your 2.4GHz network to operate your lighting device. Using the Monster Smart Lighting app, you can control your device from anywhere!
DESIGN
CREATE LINES AND CURVES
The Neon Flow’s water-resistant housing makes it perfect for edge-lighting large outdoor spaces like decks, patios, and walkways, or for illuminating large indoor spaces with the look of premium, diffused lighting.
CREATE CUSTOM DESIGNS
The Neon Flow is exceptionally flexible and can also be used to write cursive messages or create artistic, neon-style lighting designs to enhance any decor.
DESIGN TIP: Before installing, try out different designs with your Neon Flow on the floor or a table to decide what you would like to create! Shape your design and use tape to hold it in place. Make sure that you have enough mounting clips for each piece of tape, this will ensure your design looks the same when installed.
NOTE: To avoid damage, do not tightly fold the Neon light strip.
INSTALLATION
STEP 1
Determine where you will install the Neon Flow. Make sure the location is still within the range of your Wi-Fi network and that it is close enough to a power source for the cord to reach without becoming a tripping hazard
STEP 2
Using the included mounting clips and screws, and a Phillips head screwdriver (not included), mount the Neon in the desired location. For best results place one clip approximately every 18 inches to secure the entire light strip evenly.
TIP: Place more mounting clips closer to curves or corners to better secure the strip around turns and use fewer on straight areas.
STEP 3
Once installed, connect the power adapter to the port on the cable and screw on the water-tight locking cap until secure.
Connect the other end of the adapter to a powered wall outlet (outdoors this must be a GFCI-protected, hooded outlet.) The Neon Flow will automatically reconnect to the paired Wi-Fi network once powered on and will now be ready to use!
HOW TO USE
BUTTON CONTROL
Use the built-in button controller to select from many pre-programmed colours and lighting effects.
When powered off and on again, the device will resume the last used lighting mode.
APP CONTROL
In the Monster Smart Lighting app you can customize your experience by exploring color, modes, scenes & music syncing.
PC DESKTOP CONTROL
This Monster Smart Lighting product can also be controlled from your Windows PC desktop computer using the Monster Smart Lighting Desktop app and Razer Synapse. To simply control your Monster Smart Lighting devices from your desktop computer, only complete steps 4 and 5 below. To enable full Razer Chroma integrations, follow all steps.
- Step 1: Download and install Razer Synapse from https://www.razer.com/synapse-3
- Step 2: Create an account and follow all activation steps.
- Step 3: Install the Chroma Module from within Razer Synapse.
- Step 4: Download and install the Monster Smart Lighting Desktop App from the Microsoft app store or by visiting www.monsterilluminessence.com/smartlighting
- Step 5: Login using the same user information you use in the Monster Smart Lighting app on your mobile device.
- Step 6: Click the “Enable Razer Chroma” toggle. Any Monster Smart Lighting devices connected to your home network that are Chroma enabled will now be controlled through the Chroma Studio and compatible games!
NOTE: for Razer Chroma RGB™ compatibility, BOTH Razer Synapse with the Chroma Module installed and the Monster Smart Lighting Desktop App must be open and running on your 64-bit Windows 8 or higher PC.
NOTE: If you access the device using the mobile app it will automatically disable an active Chroma connection.
VOICE CONTROL
This Monster Smart Lighting product can be controlled by your choice of convenient voice assistant devices.
ALEXA
To set up Amazon Alexa voice control, go to the Integrations option in the Monster Smart Lighting app and click the “works with Alexa” button, then follow the on-screen instructions to connect using the Amazon Alexa app.
GOOGLE
To set up Hey Google voice control, go to your Google Home app, click Set Up Device, Works with Google, and then select “Monster Smart Lighting”. Follow the on-screen instructions and sign in using your Monster Smart Lighting user information.
SIRI SHORTCUTS
Siri Shortcuts are enabled by default on iOS devices. You can edit or create new shortcuts from the Shortcuts app.
TROUBLESHOOTING
Having trouble with setup?
Don’t return this product to the retailer, we’re here to help. Please call/write us for customer support: 866-246-2008 customerservice@monsterIlluminessence.com
Q: Will this Monster Smart Lighting product work with my Monster Illuminessence devices?
- A1: Not at this time. Monster Smart Lighting and Monster Illuminessence are two different device platforms and are controlled by separate apps.
- A2: Both platforms can be controlled through the use of third third-party integrations like Hey Google, Amazon Alexa, Siri Shortcuts, and Razer Chroma RGB
Q: Why is my device unresponsive after pairing?
A1: Your device may have installed a necessary update and needs to reboot. Please unplug the power and reconnect to resume operation.
Q: Why is my device failing to connect to my Wi-Fi network?
- A1: Make sure your phone or tablet is successfully connected to the 2.4GHz WI-FI network that your device will be placed on.
- A2: Make sure you enable Bluetooth and location on your phone or tablet to find nearby devices.
- А3: Make sure your phone, your Wi-Fi router, and your device are all close to each other during the pairing process (within 10ft is ideal).
- A4: If your Wi-Fi network is a mixed 2.4GHz/5GHz network, you may need to access your router settings and/or call your Internet Service Provider to create a separate 2.4GHz network.
Q: Can I cut this LED Light Strip?
A1: Yes. If desired, you can cut the light strip to shorter lengths by cutting on the copper area towards the end of the strip.
Note: Once cut,
- you cannot reconnect the light strip or attach additional light strips to this product.
- the strip will no longer be water resistant or covered under warranty.
- Be sure to remove the end cap and replace it on the new end of your light strip using waterproof glue.
Q: Can I attach additional LED Light Strips to this one?
A1: Due to the water-resistant design, this strip is not equipped with an expansion plug. Please group your devices in the app.
Smart RGB+IC Flow Neon Light Strip | Model: MOW7-1005-ICM | Input: 24V 1A The illustrated products and specifications may differ slightly from those supplied The M Monster logo and luminescence are trademarks or registered trademarks of Monster, Inc or its subsidiaries in the U.S, and other countries and are used under license. Apple and the Apple logo are trademarks of Apple Inc. registered in the U.S. and other countries. App Store is a service mark of Apple Inc. Google, Android and Google Play are trademarks of Google LLC. Pre-set-up required. Amazon, Alexa, and all related logos are trademarks of Amazon.com, inc. or its affiliates. All other brand names are trademarks of their respective owners. Neither Jem Accessories, Inc. nor Monster, Inc. Is affiliated with the respective owners of their trademarks, Licensed and Manufactured by Jem Accessories, Inc. Edison. NJ 08817. Made in China
NOTES WARRANTY
1-Year Limited Warranty – Please read and understand all instructions before using this product. If damage is caused by failure to follow the instructions, this warranty is null and void.
SAFETY
WARNING: When using outdoor use products, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and personal injury, including the following:
- Keep these instructions
- Uncoil the light strip before use
- Do not drop, puncture, or disassemble this product
- Do not install this product in any way other than what is outlined in this guide
- Do not submerge the strip or the power supply unit in the water
- The power adapter must be connected to a GFCI-protected hooded flush-type cover plate receptacle marked “Wet Location” while in use outdoors
- Avoid long exposure to direct sunlight, which may cause damage
- Do not use this product in small, enclosed locations that could limit the flow of air or trap excess heat
- Do not expose this product to open flames or use near fire
- Do not use the product in a strong magnetic field
- Do not use this product for emergency lighting/exits
- Do not allow small children to operate, modify, or install this device unsupervised
- Use a clean, soft cloth to clean – do not use any corrosive cleaners/oils to clean
- The external flexible cable or cord of these luminaries cannot be replaced; if the cord is damaged, the luminaries shall be destroyed
- The light source contained in these luminaries shall only be replaced by the manufacturer or his service agent or a similarly qualified person.
FCC Compliance
This device complies with Part 15 of the FCC. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, inducing interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used per the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF Exposure Statement
To satisfy FCCs RF exposure requirements, a separation distance of 20 cm or more should be maintained between the antenna of this device and persons during device operation. To ensure compliance, operations at closer than this distance is not recommended.
1-YEAR LIMITED WARRANTY
Jem Accessories, Inc. Limited Warranty Policy for Monster Smart Products Last Updated: March 27, 2020, This limited warranty contains important information about your rights and obligations, as well as limitations and exclusions that may apply to you.
- WHAT THIS LIMITED WARRANTY COVERS; PERIOD OF COVERAGE Jem Accessories, Inc. (Jem Accessories”), 32 Brunswick Ave, Edison, New Jersey, USA, warrants to the owner of the enclosed Monster Smart-branded product containing ting the region is or tea a retire outine ero, rene ear. installed by a professional. If the Product fails to conform to this Limited Warranty during the Warranty Period, Jem Accessories will, at its sole discretion, either (a) repair or replace any defective Product or component; with proof of purchase using original documentation. Repair or replacement may be made with a new or refurbished product or components, at Jem Accessories’s sole discretion. If the Product or a component incorporated within it is no longer available, Jem Accessories may, at Jem Accessories’s sole discretion, replace the Product with a similar product of a similar function. This is your sole and exclusive remedy for breach of this Limited Warranty. Any Product that has either been repaired or replaced under this Limited Warranty will be covered by the terms of this Limited Warranty for the longer of (a) ninety 90) days from the date of delivery of the repaired Product or replacement Product, or (b) the remaining Warranty Period. This Limited Warranty is not transferable from the original purchaser to subsequent owners.
- TOTAL SATISFACTION RETURN POLICY If you are the original purchaser of the Product and you are not satisfied with this Product for any reason, you may return it in its original condition to the retailer in compliance with the retailer’s return policy.
- WARRANTY CONDITIONS; HOWTO GET SERVICE IF YOU WANT TO CLAIM UNDER THIS LIMITED WARRANTY Before making a daim under this Limited Warranty, the owner of the Product must (a) visit monsterilluminessence.com/support during the Warranty Period to provide notice of your warranty daim and describe the alleged failure, and (b) comply with Jem Accessories (or its authorized distributor’s) return shipping instructions. Jemn Accessories will have no warranty obligations concerning a returned Product if it determines, at its reasonable discretion after examination of the returned Product, that the Product is an Ineligible Product (defined below).
- WHAT THIS LIMITED WARRANTY DOES NOT COVER This Limited Warranty does not cover the following (collectively” negligible Products”: i) Products marked as “sample” or”Not for Sale”, or sold “AS IS”; Products that have been subject to (a) modifications, alterations, tampering, or improper maintenance or repairs;
- handling, storage, installation, testing, or use not by any quick start guide, manual or other instructions provided by Jem Accessories; (c) abuse or misuse of the Product; (d) breakdowns, fluctuations, or interruptions in electric power or the telecommunications network; or (e) Acts of God, including but not limited to lightning, flood, tornado, earthquake, or hurricane; or fi) any non-Jem Accessories branded hardware products, even if packaged or sold with Jem Accessories hardware. This Limited Warranty does not cover consumable parts, including batteries, unless damage is due to defects in materials or workmanship of the Product, or software (even if packaged or sold with the product). Jem Accessories recommends that you use only authorized service providers for maintenance or repair. Unauthorized use of the Product or software can impair the Product’s performance and may invalidate this Limited Warranty.
- DISCLAIMER OF WARRANTIES Except as stated above in this limited warranty, and to the maximum extent permitted by applicable law, Jem Accessories disclaims all express, implied, and statutory warranties and conditions concerning the product, including the implied warranties of merchantability and fitness for a particular purpose. To the maximum extent permitted by applicable law, Jem Accessories also limits the duration of any applicable implied warranties or conditions to the duration of this limited warranty.
- LIMITATION OF DAMAGES In addition to the above warranty disclaimers, in no event will Jem Accessories be liable for any consequential, incidental, exemplary, or special damages, including any damages for lost data or lost profits, arising from or relating to this limited warranty or the product, and Jem Accessories’ total cumulative liability arising from or related to this limited warranty or the product will not exceed the amount paid for the product by the original purchaser.
- LIMITATION OF LIABILITY The Jem Accessories online services at monsterilluminessence.com (“services”) provide you information (“product information” regarding your Jem Accessories products or other peripherals connected to your products (“product peripherals”). The type of product peripherals that may be connected to your product may change from time to time. Without limiting the generality of the disclaimers above, all product information is provided for your convenience, “as is”, and “as available”. Jem Accessories does not represent, warrant, or guarantee that product information will be available, accurate, or reliable or that product information or use of the services or product will provide safety in your home. You use all product information, the services, and the product at your discretion and risk. You will be solely responsible for (and Jem Accessories disclaims) any loss, liability, or damages, including to your wining, fixtures, electricity, home, product, product peripherals, computer, mobile device, and all other items and pets in your home, resulting from your use of the product information, services, or product. Product information provided by the services is not intended as a substitute for direct means of obtaining the information. For example, a notification provided through the service is not intended as a substitute for audible and visible indications in the home and on the product, nor for a third-party monitoring service that monitors alarm state.
- YOUR RIGHTS AND THIS LIMITED WARRANTY This Limited Warranty gives you specific legal rights. You may also have other legal rights that vary by state, province, or jurisdiction. Likewise, some of the limitations in this Limited Warranty may not apply in certain states, provinces or jurisdictions. The terms of this Limited Warranty will apply to the extent permitted by applicable law. For a full description of your legal rights, you should refer to the laws applicable in your jurisdiction and you may wish to contact a relevant consumer advisory service. If you need to start a warranty daim for your Monster Smart device, please reach out to Customer Support by emailing customerservice@monsterilluminessence.com or calling our support number 866-246-2008. Please allow 7-10 business days to process warranty claims Customers located outside of the U.S. will be responsible for all shipping costs.
Documents / Resources
 |
MONSTER MOW7-1005-ICM Smart RGB Plus IC Flow Flexible Neon Light Strip [pdf] User Guide MOW7-1005-ICM Smart RGB Plus IC Flow Flexible Neon Light Strip, MOW7-1005-ICM, Smart RGB Plus IC Flow Flexible Neon Light Strip, Plus IC Flow Flexible Neon Light Strip, Flexible Neon Light Strip, Neon Light Strip, Light Strip, Strip |
