EPSON LW-C610 Labelworks Lightweight Label Maker
Specifications
- Dimensions: Approx. 55mm (W) x 133mm (D) x 146mm (H)
- Weight: Not specified
- Supported tape width: Not specified
- Interface: Not specified
- Temperature: Not specified
- Power supply:
- Battery: 6 x AA alkaline battery
- AC adapter Type: AST1116Z2-1
- Manufacturer: Seiko Epson Corp.
- Input: AC100-240 V, 0.4 A, 50-60 Hz (dedicated adapter, power cable only)
- Output: DC11 V, 1.64 A
- Total output power: 18.04 W
- Method: Not specified
- Output Max. distance: About 10 m*2
- Frequency band: 2.4 GHz band (2.4000 to 2.4835 GHz)
- Profile: SPP
Product Usage Instructions
Powering On/Off the Printer
To power on the printer, press the power button once. To power off the printer, press and hold the power button for 2 seconds or longer.
Creating and Printing Labels
- Install the appropriate AC cable for your region based on the included Type C and Type G cables for LW-C610 model.
- For LW-C610PX model, ensure you have the optional AC adapter for power.
- Download and install the Epson Label Editor Mobile app from the App Store or Google Play.
- Open the app and follow the instructions to create and print labels.
FAQ
- Q: What should I do if my prints are unsuccessful?
- A: If your prints are unsuccessful, ensure you have installed the correct AC cable or adapter based on your printer model. Check the power source and try again.
- Q: How do I adjust the settings for label printing?
- A: You can adjust the label printing settings within the Epson Label Editor Mobile app. Explore the app’s settings to customize your label designs.
- Q: Can I use rechargeable batteries with the printer?
- A: It is recommended to use AA alkaline batteries with the printer for optimal performance. Rechargeable batteries may not provide sufficient power.
Information
Setup Guide
https://support.epson.net/p_doc/965
LW-C610PX
LW-C610
The printer model name varies by country or region where you purchase the printer. Please check the model name of your printer.
What In The Box
- Depending on the product model, [A] may not be included.
- For LW-C610: Two AC cables, Type C and Type G, are included. Use one of them for your region
Battery Installation
- Always use AA-size alkaline dry cell batteries.
- Do not unplug the AC adapter while the product is in operation, otherwise printing may not be successful.
For LW-C610PX: The AC adapter is not included with this product. The AC adapter is available as an option.
Installation Instructions
- Make sure to turn the printer off when installing a tape cartridge.
- For LW-C610: Make sure to use a dedicated LK Tape.
- For LW-C610PX: Make sure to use a dedicated PX Tape.
Connecting a Mobile Device
Connecting a Mobile Device
Creating and printing a label
Creating and printing a label
Power
- Press and hold the power button for 2 seconds or longer to turn off the power.
Specifications
Regulatory Compliance Information
Indication of the manufacturer and the importer in accordance with requirements of directive 2011/65/EU (RoHS)
Each location
- Manufacturer: SEIKO EPSON CORPORATION
- Address: 3-5, Owa 3-chome, Suwa-shi,
- Nagano-ken 392-8502 Japan
- https://www.epson.com
- Importer for the EU: EPSON EUROPE B.V.
- Address: Atlas Arena, Asia Building, Hoogoorddreef 5, 1101 BA
- Amsterdam Zuidoost The Netherlands
- https://www.epson.eu
- Model: MBH7BTZ42
- Bluetooth® Modules
- SEIKO EPSON CORPORATION
- EPSON
- FUJITSU COMPONENT LIMITED
- Model: LW-C610
- Label Printer
- SEIKO EPSON CORPORATION
- EPSON
Information on the LW-C610
This equipment contains the following Bluetooth® module.
- Manufacturer: Fujitsu Component Limited
- Type: MBH7BTZ42
For Users in Europe: Hereby, Seiko Epson Corporation declares that the radio equipment model LW-C610 is in compliance with Directive 2014/53/EU: The full text of the EU declaration of conformity is available at the following internet address:
For Users in the United Kingdom: Hereby, Seiko Epson Corporation declares that the radio equipment type LW-C610 is in compliance with the relevant statutory requirements.
The full text of the declaration of conformity is available at the following internet address:
Epson can not accept responsibility for any failure to satisfy the protection requirements resulting a non-recommended modification of the products
- Radiofrequency band 2400M-2483.5MHz
- Maximum radio-transmitted power 10dBm (EIRP)
FCC Statement
FCC Compliance Statement For United States Users
Supplier’s Declaration of Conformity
- According to 47CFR, Part 2 and 15
- Class B Personal Computers and Peripherals; and/or
- CPU Boards and Power Supplies used with Class B Personal Computers
- We: K-SUN Corporation
- Located at: 370 SMC Drive PO Box 309 Somerset WI 54025, USA
- Tel: 715-247-4440
Declare under sole responsibility that the product identified herein, complies with 47CFR Part 2 and 15 of the FCC rules as a Class B digital device. Each product marketed, is identical to the representative unit tested and found to be compliant with the standards. Records maintained continue to reflect the equipment being produced can be expected to be within the variation accepted, due to quantity production and testing on a statistical basis as required by 47CFR §2.906 Operation is subject to the following two conditions :
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
- Trade Name: EPSON
- Type of Product: Label Printer
- Model: LW-C610PX
This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency(RF) Exposure Guidelines. This equipment should be installed and operated keeping the radiator at least 20cm or more away from person’s body.
WARNING
The connection of a non-shielded equipment interface cable to this equipment will invalidate the FCC Certification or Declaration of this device and may cause interference levels which exceed the limits established by the FCC for this equipment. It is the responsibility of the user to obtain and use a shielded equipment interface cable with this device. If this equipment has more than one interface connector, do not leave cables connected to unused interfaces. Changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate this equipment.
Industry Canada Compliance Statement For Canadian Users
CAN ICES-3(B)/NMB-3(B)
This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions:
- this device may not cause interference, and
- this device must accept any interference, including interference that may cause undesired operation of the device.
For Users in the USA
WARNING: Handling the cord on this product or cords associated with accessories sold with this product, will expose you to lead, a chemical known to the State of California to cause birth defects or other reproductive harm. Wash hands after handling. (This notice is provided in accordance with Proposition 65 in Cal. Health & Safety Code § 25249.5 and following.)
Countries and regions where this product can be used
This product can be used only in the countries and regions listed below
- AT Austria
- BE Belgium
- CH Switzerland
- DE Germany
- DK Denmark
- ES Spain
- FI Finland
- FR France
- GB United Kingdom
- IE Ireland
- IS Iceland
- IT Italy
- LU Luxembourg
- NL Netherlands
- NO Norway
- PT Portugal
- SE Sweden
Documents / Resources
 |
EPSON LW-C610 Labelworks Lightweight Label Maker [pdf] User Guide LW-C610, LW-C610PX, LW-C610 Labelworks Lightweight Label Maker, LW-C610, Labelworks Lightweight Label Maker, Lightweight Label Maker, Label Maker, Maker |
