File:Fritz!.svg - WikipediaFRITZ!
Repeater
6000
Quick Start GuideFRITZ Repeater 6000 WiFi 6 Repeater with Three Radio Units - icon 2

Repeater 6000 WiFi 6 Repeater with Three Radio Units

The FRITZ!Repeater 6000
The FRITZ! Repeater 6000 extends the Wi-Fi network of a FRITZ!Box or any other wireless router. On its two LAN sockets, additional network devices can be connected to the FRITZ!Repeater, or it can be connected with a FRITZ!Box or another wireless router by cable.
Manual
This quick guide includes important information for launching operation of your FRITZ!Repeater 6000. All further information is presented in our PDF manual and in the Knowledge Base at en.avm.de/service.
Wireless Routers from Other Manufacturers
You can use the FRITZ!Repeater 6000 with routers from other manufacturers.
For the sake of simplicity, this quick guide will refer to the FRITZ!Box, unless a given function is only supported by a certain type of device.
Mesh FRITZ Repeater 6000 WiFi 6 Repeater with Three Radio Units - icon with FRITZ!
The FRITZ!Repeater 6000 supports Mesh FRITZ Repeater 6000 WiFi 6 Repeater with Three Radio Units - icon in combination with a FRITZ!Box with FRITZ!OS 7.0 (or higher).
In the Mesh of a FRITZ!Box, FRITZ! products with Wi-Fi functionality auto matically adoptvarious settings to build an especially powerful Wi-Fi network.
The Mesh Overview of the FRITZ!Box user interface presents information on the connections in the Mesh and allows you to update your FRITZ! products.

Security

  • Operate the FRITZ!Repeater 6000 in a dry place that is free of dust and protected from direct sunlight, and provide for sufficient ventilation.
  • The FRITZ!Repeater 6000 is intended for indoor use only. Never let liquids get inside the housing.
  • Connect the FRITZ!Repeater 6000 to an easily accessible outlet.
  • Do not open the FRITZ!Repeater 6000 housing. Opening and/or repairing the device can present a hazard.
  • Unplug the FRITZ!Repeater 6000 from the outlet before cleaning. Clean the device using a moist cloth.

Package Contents

Name Illustration
1 FRITZ!Repeater 6000 FRITZ Repeater 6000 WiFi 6 Repeater with Three Radio Units - Illustration
1 power adapter FRITZ Repeater 6000 WiFi 6 Repeater with Three Radio Units - adapter
1 LAN cables FRITZ Repeater 6000 WiFi 6 Repeater with Three Radio Units - LAN cables
1 quick guide no illustration

Device Features

Name Illustration  Function Action/Meaning
Connect button FRITZ Repeater 6000 WiFi 6 Repeater with Three Radio Units - Connect Establish connection Press and hold for 1 second
Connect with another access point Press and hold for 6 seconds
Load factory settings Press and hold for 15 seconds
Connection Quality
LED
FRITZ Repeater 6000 WiFi 6 Repeater with Three Radio Units - fig 1 on Connection established, good connection
FRITZ Repeater 6000 WiFi 6 Repeater with Three Radio Units - fig 2 on Weak connection
flashing Connection interrupted
FRITZ Repeater 6000 WiFi 6 Repeater with Three Radio Units - fig 3 off Wi-Fi not enabled; a schedule may be configured
Connect LED FRITZ Repeater 6000 WiFi 6 Repeater with Three Radio Units - fig 4 on Connection good
flashing slowly (2 second intervals): not connected with FRITZ!Box, no Wi-Fi connection configured fast (twice per second): WPS, restart or update in progress
off Schedule enabled (wireless bridge)
LAN ports FRITZ Repeater 6000 WiFi 6 Repeater with Three Radio Units - fig 5 Connect network devices by cable

Connection Possibilities

You can connect the FRITZ!Repeater 6000 with a FRITZ!Box via Wi-Fi or using a LAN cable.

Wi-Fi connection to the FRITZ!Box if LAN connection to the FRITZ!Box if
the FRITZ!Repeater is to be deployed within the Wi-Fi range of the FRITZ!Box the FRITZ!Repeater is to be deployed outside the Wi-Fi range of the
FRITZ!Box or another repeater in the home network
multiple network devices without Wi-Fi are to be integrated into the home network on the LAN ports of the repeater it is possible to establish a LAN connection (for example using the existing cabling in your home)
FRITZ Repeater 6000 WiFi 6 Repeater with Three Radio Units - Continue reading FRITZ Repeater 6000 WiFi 6 Repeater with Three Radio Units - Continue reading 1

Setting Up the Wi-Fi Connection

Action Illustration
1 Connect the FRITZ!Repeater to an outlet close to the FRITZ!Box. FRITZ Repeater 6000 WiFi 6 Repeater with Three Radio Units - outlet close
2 Wait until the Connect LED starts flashing slowly. FRITZ Repeater 6000 WiFi 6 Repeater with Three Radio Units - flashing slowly
3 Start the connection to the FRITZ!Repeater: Press the Connect button. The Connect LED flashes quickly. FRITZ Repeater 6000 WiFi 6 Repeater with Three Radio Units - Press the Connect
4 Start the connection to your FRITZ!Box:
• FRITZ!Box with Connect/WPS, Connect or WPS button:
Press button briefly. The WLAN or Connect LED flashes.
• On a FRITZ!Box with WLAN/WPS or WLAN button: Press the button for about 6 seconds until WLAN starts flashing.
• On another wireless router, press the button that starts WPS.
FRITZ Repeater 6000 WiFi 6 Repeater with Three Radio Units - WPS button
5 As soon as the Connect LED on the FRITZ!Repeater lights up permanently, the connection has been established.
If the Connect LED on the FRITZ!Repeater starts flashing slowly again, repeat steps 3 and 4 of these instructions.
FRITZ Repeater 6000 WiFi 6 Repeater with Three Radio Units - Repeater lights

When the wireless connection has been established, move the FRITZ!Repeater to the desired location. Continue reading on pageSeite 10.
If the Wi-Fi connection cannot be established at the touch of a button, alternativeinstructions are presented in the PDF manual at en.avm.de/service.

1 Plug the the FRITZ!Repeater into an electrical outlet.
2 Connect the FRITZ!Repeater to your computer using a LAN cable and wait until the Connect LED starts flashing slowly.
3 Enter http://fritz.repeater in a web browser. The user interface of the FRITZ!Repeater appears.
4 Follow the instructions of the wizard in the user interface until configuration is complete, selecting LAN bridge as the type of connection.
5 Connect the FRITZ!Repeater to your FRITZ!Box using a LAN cable.
As soon as the Connection Quality and Connect LEDs light up permanently, the FRITZ!Repeater is ready for operation.

On a FRITZ!Box with FRITZ!OS 7.0 or higher, enable Mesh FRITZ Repeater 6000 WiFi 6 Repeater with Three Radio Units - icon

1 Press the Connect button on the FRITZ!Repeater. The Connect LED flashes.
2 Within two minutes, confirm on your FRITZ!Box that Mesh has been enabled:
• FRITZ!Box with Connect/WPS, Connect or WPS button: Press button briefly
• FRITZ!Box with WLAN/WPS or WLAN button: Press button for at least 6 seconds

Positioning the FRITZ!Repeater

Once you have configured a Wi-Fi connection to the FRITZ!Box for the FRITZ!Repeater, move the repeater to the desired location. Connect the FRITZ!Repeater to an outlet located about halfway between the FRITZ!Box and the wireless devices for which the Wi-Fi network is to be extended. The FRITZ!Repeater and the FRITZ!Box reestablish the configured connection automatically.

Connection Quality Display on the FRITZ!Repeater
good connection FRITZ Repeater 6000 WiFi 6 Repeater with Three Radio Units - good connection
weak connection FRITZ Repeater 6000 WiFi 6 Repeater with Three Radio Units - weak connection
no connection FRITZ Repeater 6000 WiFi 6 Repeater with Three Radio Units - no connection

If connection quality is insufficient, select an outlet closer to the FRITZ!Box.
You can position the FRITZ!Repeater precisely using the FRITZ!App WLAN.

FRITZ!App WLAN

The FRITZ!App WLAN assists you in finding the ideal position for your FRITZ!Repeater. The FRITZ!App WLAN is available for your smartphone free of charge.

Google Play (Android) App Store (iOS)
FRITZ Repeater 6000 WiFi 6 Repeater with Three Radio Units -qr FRITZ Repeater 6000 WiFi 6 Repeater with Three Radio Units - qr1
https://play.google.com/store/apps/details?id=de.avm.android.wlanapp&hl=de https://apps.apple.com/de/app/fritz-app-wlan/id1351324738

FRITZ!App WLAN
Find the ideal location for the FRITZ!Repeater

FRITZ Repeater 6000 WiFi 6 Repeater with Three Radio Units - App WLANen.avm.de/products/fritzapps

Configuring the FRITZ!Repeater

FRITZ!Repeater on Settings and Information
FRITZ!Box with Mesh FRITZ Repeater 6000 WiFi 6 Repeater with Three Radio Units - icon
(FRITZ!OS 7.0 or higher)
The FRITZ!Repeater in the Mesh FRITZ Repeater 6000 WiFi 6 Repeater with Three Radio Units - icon automatically adopts all of the settings of the FRITZ!Box.
Information on your repeater is presented at http://fritz.box under Home Network / Mesh in the user interface of the FRITZ!Box.
FRITZ!Box
(FRITZ!OS 7.0 or earlier)
During WPS, the FRITZ!Repeater adopts the Wi-Fi network name and Wi-Fi password of the FRITZ!Box.
Further settings can be configured via the user interface of the FRITZ!Repeater: http://fritz.repeater.
Wireless router from another manufacturer During WPS, the FRITZ!Repeater adopts the Wi-Fi network name and Wi-Fi password of the wirless router.
Further settings can be configured via the IP address user interface of the FRITZ!Repeater.
1. Open the user interface of your wireless router.
2. Determine the IP address of the FRITZ!Repeater.
3. Enter the IP address of the FRITZ!Repeater in a web browser.
The user interface of the FRITZ!Repeater appears.

Technical Specifications

  • Support for Wi-Fi 6 (IEEE 802.11ax) and older Wi-Fi standards (IEEE 802.11ac/n/g/a)
  • Extended range on both frequency bands with tri-band 4 x 4 (2 x 5 GHz/1 x 2.4 GHz)
  • Ethernet (LAN): 1 x 2.5 GBit und 1 x 1 GBit
  • Antennas: 12

Radio Frequencies and Transmitter Power
2.4 GHz Wi-Fi: range 2.4 GHz – 2.483 GHz, maximum 100 mW
5 GHz Wi-Fi: range 5.15 GHz – 5.35 GHz, maximum 200 mW plus
5.47 GHz – 5.725 GHz, maximum 1000 mW
In the 5-GHz band for Wi-Fi, the range from 5.15 GHz to 5.35 GHz is intended
only for indoor use. This restriction or requirement is effective in the countries
AT, BE, BG, CY, CZ, DE, DK, EE, EL, ES, FI, FR, HR, HU, IE, IT, LT, LU, LV, MT, NL, PL, PT, RO, SE, SI, SK, UK.

Legal Notice

Declaration of CE Conformity
CE SYMBOL AVM declares herewith that the FRITZ!Repeater is compliant with the basic requirements and the relevant rules in directives 2014/53/EU, 2009/125/EC and 2011/65/EU.
The long version of the declaration of CE conformity is available at en.avm.de/ce.
Diagnostics Data
To improve the product and ensure safe operation on your connection, AVM uses error reports and diagnostic data where needed.
These settings can be changed by clicking on Contents below the menu, and on AVM Services in the footer.

Disposal
WEE-Disposal-icon.png In accordance with European directives, the FRITZ!Repeater and its cables may not be disposed with household waste. Please bring these to your local collection points for disposal.
Legal Notice
Legal information and licensing conditions are presented in the help of the user interface.

en.avm.de/service
Manuals
Guide
Downloads
SupportFRITZ Repeater 6000 WiFi 6 Repeater with Three Radio Units - icon 1Wi-Fi
en.avm.de
AVM GmbH, Alt-Moabit 95, 10559 Berlin
info@avm.deFRITZ Repeater 6000 WiFi 6 Repeater with Three Radio Units - icon 2

Documents / Resources

FRITZ Repeater 6000 WiFi 6 Repeater with Three Radio Units [pdf] User Guide
Repeater 6000 WiFi 6 Repeater with Three Radio Units, Repeater 6000, WiFi 6 Repeater with Three Radio Units, 6 Repeater with Three Radio Units, Three Radio Units, Repeater

References

Leave a comment

Your email address will not be published. Required fields are marked *