BEGA-logo

BEGA 23259.3 LED Wall Luminaire

BEGA-23259.3-LED-Wall-Luminaire-PRODUCT

Product Information

This is a luminaire that is subject to national safety regulations for installation and operation. It is recommended to have a qualified electrician carry out the installation and commissioning. The manufacturer does not accept liability for damage caused by improper use or installation. Any modifications made to the luminaire should be done by the responsible person, who will then be considered the manufacturer. The electronic components in the luminaire are protected against overvoltage according to DIN EN 61547. For additional protection against transients, it is recommended to use separate overvoltage protection components, which can be found on the manufacturer’s website at www.bega.com. The luminaire has a lamp module connected wattage of 19.2 W and a luminaire connected wattage of 22.4 W. The rated temperature is between 25°C and 35°C, and the ambient temperature should also be within this range. The module designation is 3x LED-0425/930. It has a colour temperature of 3000 K and a colour rendering index (CRI) of over 90. The module has a luminous flux of 3165 lm, while the luminaire has a luminous flux of 2170 lm. The luminaire’s luminous efficiency is 96.9 lm/W.

Product Usage Instructions

  1. For mounting and dismantling the luminaire, ensure there is a minimum distance of 450 mm between the removable cap and the wall.
  2. During installation or relamping, avoid touching the light output opening of the LED directly as they are high-quality electronic components.

Spare Parts

  • Spare Glass: Part Number 11 002 949 .1R
  • LED Power Supply Unit: Part Number G DEV-0352/1000
  • LED Module 3000 K: Part Number LED-0425/930
  • Gasket: Part Number 83 001 179

DIMENSIONSBEGA-23259.3-LED-Wall-Luminaire-FIG-1

Instructions for use

Application

  • Wall luminaire · indoor luminaire made of hand-blown opal glass and metal housing, for all lighting tasks in interior applications.
  • They are ideal for places where a soft and uniform lighting distribution is required. Luminaire with a high protection class.

Product Description

  • Luminaire made of Aluminium, finish Chrome
  • Hand-blown opal glass 2 elongated fixing holes
  • Width 6 mm · 450 mm spacing
  • Insulating housing with cable entry for  mains supply cable up to ø 10,5 mm, max. 3 x 1,5@
  • Connection terminal 2.5@
  • Earth conductor connection
  • LED power supply unit 220-240 V x 0/50-60 Hz DC 198-280 V
  • BEGA Thermal Switch®
  • Temporary thermal shutdown to protect temperature-sensitive components
  • Safety class I
  • Protection class IP 44
  • Protected against granular foreign bodies ≥ 1 mm and splash water
  • Impact strength IK02
  • Protection against mechanical impacts < 0.2 joule
  • BEGA-23259.3-LED-Wall-Luminaire-FIG-2– Safety mark
  • BEGA-23259.3-LED-Wall-Luminaire-FIG-3 – Conformity mark
  • Weight: 2.8 kg
  • This product contains light sources of energy efficiency class(es) D

Safety

  • The installation and operation of this luminaire are subject to national safety regulations. Installation and commissioning may only be carried out by a qualified electrician.
  • The manufacturer accepts no liability for damage caused by improper use or installation. If subsequent modifications are made to the luminaire, the person responsible for these modifications shall be considered the manufacturer.

Overvoltage protection

  • The electronic components installed in the luminaire are protected against overvoltage in accordance with DIN EN 61547.
  • To achieve an additional protection against e. g. transients, etc. we recommend separate overvoltage protection components.
  • You can find them on our website at www.bega.com.

Lamp

  • Module connected wattage 19.2 W
  • Luminaire connected wattage 22.4 W
  • Rated temperature ta = 25 °C
  • Ambient temperature ta max = 35 °C

23 259.3 K3

  • Module designation 3x LED-0425/930
  • Colour temperature 3000 K
  • Colour rendering index CRI > 90
  • Module luminous flux 3165 lm
  • Luminaire luminous flux 2170 lm
  • Luminaire luminous efficiency 96,9 lm / W

BEGA-23259.3-LED-Wall-Luminaire-FIG-4

Installation

  • For mounting and dismantling please keep a minimum distance of 450 mm between the removable cap and the wall.
  • LEDs are high-quality electronic components!Please avoid touching the light output opening of the LED directly during installation or relamping.

Open luminaire:

  • Loosen knob, remove cap and glass.
  • Drill mounting holes into the mounting surface – spacing 450 mm.
  • For the mains supply connecting open the insulation housing – pull open – strip mains supply cable max. 15 mm and lead it into the insulation housing – see sketch.
  • Make earth conductor connection and electrical connection.
  • Connect both parts of the insulation housing until they audibly engage.
  • The outer coating of the cable has to be fully enclosed by the compression nipple.
  • Fix luminaire with enclosed or any other suitable fixing material onto the mounting surface. Remove bubble wrap underneath LED module. Place glass into luminaire housing, close luminaire with the cap and screw in knob into the cap.

Cleaning · Maintenance

  • Clean luminaire regularly with solvent-free cleansers from dirt.
  • Defective glass must be replaced.

Replacement of the LED module

  • The designation of the LED module is noted on a label in the luminaire.
  • The light colour and light output of BEGA replacement modules correspond to those of the modules originally fitted. The module can be replaced by qualified persons using standard tools.
  • Disconnect the system.
  • Loosen lateral knob, remove cap and take out glass.
  • Please follow the installation instructions for the LED module.
  • Defective glass must be replaced.
  • Insert glass into luminaire housing, close luminaire with the cap and screw in knob into the cap.

Spares

  • Spare glass 11 002 949 .1R G
  • LED power supply unit DEV-0352/1000
  • LED module 3000 K LED-0425/930
  • Gasket 83 001 179

BEGA Gantenbrink-Leuchten KG · Postfach 31 60 · 58689 Menden · info@bega.com · www.bega.com

Documents / Resources

BEGA 23259.3 LED Wall Luminaire [pdf] Instruction Manual
23259.3, 23259.3K3, 23259.3 LED Wall Luminaire, LED Wall Luminaire, Wall Luminaire, Luminaire

References

Leave a comment

Your email address will not be published. Required fields are marked *