User Menual

Hisense RB400N4BC3 Hisense Refrigerator

Hisense RB400N4BC3 Hisense Refrigerator

Before operating this unit, please read this manual thoroughly, and retain for future reference.

CE notice

This product has been determined to be in compliance with the Low Voltage Directive (2006/95/EC),the Electromagnetic Compatibility Directive(2004/108/EC)and the Eco-Design Directive (2009/125/EC) implemented by Regulation(EC) No 643/2009 of the European Union

 

Brief introduction

Thank you for your choosing our products. We are sure you will find your new appliance a pleasure to use. Before you use the appliance, we recommend that you read through these instructions carefully, which provides details about its usage and functions.

  • Please ensure that all people using this appliance are familiar with its operations and safety features. It is important that you install the appliance correctly and pay attention to the safety instructions carefully.
  • We recommend that you keep this user’s manual with the appliance for future reference and retain it to any future users.
  • This appliance is intended to be used in household and similar applications such as:   -Staff kitchen- areas in shops, offices and other working environments;                       -Farmhouses by clients in hotels, motels and other residential types of environment;          – Bed and breakfast type of environments.
  • If you feel that the appliance is not operating correctly, please check the Troubleshooting page for assistance. If still in doubt contact the customer service help line for assistance or to arrange a call out by an authorized service engineer.

 

Important safety instructions

General safety and daily use

Caution It is important to use your appliance safely. We recommend that you follow the guidelines below. Store any food in accordance with the storage instructions from the manufacturer. Don’t use mechanical devices or any other means to speed up the defrosting process, unless they are approved by the manufacturer.

  • Don’t try to repair the appliance yourself. It is dangerous to alter the specifications or modify this product in any way. Any damage to the cord may cause short circuit, fire or electric shock.
  • Pay attention not to damage the tubing of the refrigerant circuit.
  • Don’t place too much food directly against the air outlet on the rear wall of both the refrigerator and freezer compartment, as it affects sufficient air circulation.
  • Don’t place hot items near the plastic components of this appliance. Frozen food must not be refrozen once it has been thawed out.
  • Don’t store bottled or canned drinks (especially carbonated drinks) in the freezer compartment. Bottles and cans may explode.
  • Do not consume ice popsicles or ice cubes straight from the freezer as this can cause freezer burn to the mouth and lips.
  • To avoid items falling and causing injury or damage to the appliance, do not overload the door racks or put too much food in the crisper drawers.

Safety for children and infirm persons

Caution This appliance is not intended Z! for use by persons (including children) with reduced physical, sensory or mental capabilities, or a lack of experience and knowledge, unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.

  • Keep all packaging away from children to avoid risk of suffocation.
  • Protect children from being scalded by touching the very hot compressor at the rear bottom of appliance
  • Don’t place items on top of the appliance as this could cause injury should they fall off.
  • Never allow children to play with the appliance by hanging or standing over or on the doors, racks, shelves and drawers etc.

Safety about electricity

Caution To avoid the risks that are always present when using an electric appliance, we recommend that you pay more attention to the instructions about electricity below.

  • Unpack the appliance and check through the appliance. Should any damage be evident, don’t plug in the appliance but contact the shop immediately from which you purchased it. Keep all packing materials in this case.
  • We recommend that you wait for 4 hours before connecting the appliance to allow the refrigerant to flow back into the compressor.
  • The appliance must be applied with single phase alternating current of 220-240V/50Hz. If the voltage fluctuates exceeding the upper limit, A.C. automatic voltage regulator of more than 350W should be applied to the refrigerator for safety use.
  • The mains plug must be accessible when the appliance is installed.
  • This appliance must be earthed.                                                                                    -This appliance is fitted with a fused plug in accordance with local standard. The fused plug should be suitable for use in all houses fitted with sockets in accordance with current specifications.                                                                                                                     -If the fitted plug is not suitable for your socket outlets, it should be cut off and carefully disposed of. To avoid a possible shock hazard, do not insert the discarded plug into a socket. If in doubt contact a qualified, registered electrician.
  • Do not use extension cords or multiple sockets which could cause overloading of wiring circuits and could cause a fire.
  • Always plug your appliance into its own individual electrical socket which has a voltage rating that matched the rating plate.
  • Make sure that the plug is not squashed or damaged. Otherwise, it may cause short circuit, electric shock or overheat and even cause a fire.
  • Do not insert the mains plug if the socket is loose, there is a risk of electric shock or fire.
  • Switch off the appliance and disconnect it from the mains power before you clean or move it.
  • Never unplug the appliance by pulling on the electrical cord. Always grip the plug firmly and pull straight out from the socket to prevent damaging the power cord.
  • Do not operate the appliance without the light cover of interior lighting.
  • Any electrical component must be replaced or repaired by a qualified electrician or authorized service engineer. Only genuine spares should be used.
  • Do not use electrical appliances such as ice cream makers inside the food storage compartments of the appliance, unless they are approved by the manufacturer.
  • Do not look direct into the LED light located in the refrigerator compartment with optical instruments to avoid eye injuries. If it is not functioning correctly, consult a qualified, registered electrician or replace it in accordance with the “cleaning and care” chapter.

The refrigerant and risk of fire

Risk Fire icon The appliance contains a small quantity of refrigerant (R600a or R134a) in the refrigerant circuit. Check thecompressor label on the rear of the appliance to see which refrigerant is used for your appliance.

  • If the appliance contains iso-butane (R600a) refrigerant, which is environmentally friendly but flammable. ensure that tubing of the refrigerant circuit is not damaged during transportation and installation to avoid risk of fire caused by leaking refrigerant.
  • Keep burning candles, lamps and other items with naked flames and sources of ignition away from the appliance and ventilate the room thoroughly to avoid the risk of fire and eye injury should any leakage of refrigerant (R600a) exist.
  • Do not store products which contain flammable propellants (e.g. spray cans) or explosive substances in the appliance.
  • The room space must be at least 1m3 per 8g of refrigerant (R600a). The amount of refrigerant in your appliance is indicated on the rating plate inside.

 

Installing your new appliance

Before using the appliance for the first time, you should be informed of the following tips.

Ventilation of appliance

Caution In order to improve efficiency /!\ of the cooling system and save energy, it is necessary to maintain good ventilation around the appliance for the dissipation of heat. For this reason, sufficient clear space should be available around the refrigerator. Suggest :It is advisable for there to be at least 75mm of space from the back to the wall, at least 100mm from its top, at last 100mm from its side to the wall and a clear space in front to allow the doors to open 135o. As shown in following diagrams.

FIG 1 Installing your new appliance

Note:

  • This appliance performs well within the climate class showed in the table below.

It may not work properly if being left at a temperature above or below the indicated range for a long period.

FIG 3 Ambient temperature

  • Stand your appliance in a dry place to avoid high moisture.
  • Keep the appliance out of direct sunlight rain or frost. Stand the appliance away from heat sources such as stoves, fires or heaters.

Leveling of appliance

  • For sufficient leveling and air circulating in the lower rear section of the appliance, the bottom feet may need to be adjusted. You can adjust them manually by hand or by using a suitable spanner.
  • To allow the doors to self-close, tilt the top backwards by about 10mm.

FIG 2 Leveling of appliance

Installing the door handles

For the convenience of transportation, the door handles are separately provided in a plastic bag, you can install the door handles as follows.

  1. Lever screw covers on the left side of the door, and then put them back to the plastic bag.
  2. Match the handle on the left side of the door, keeping axes of screw holes in the handle and the door in a line, as the picture shows.                             FIG 4 Installing the door handles
  3. Fix the handle with the special screws provided in the plastic bag. And then install the handle covers.

Reversing the door

The side at which the door opens can be changed, from the right side (as supplied) to the left side, if the installation site requires.

Warning! When reversing the door, the appliance must not be connected to the mains. Ensure that the plug is removed from the mains socket..

Tools you will need

FIG 5 Tools you will need

Note: Before you start lay the refrigerator on its back in order to gain access to the base, you should rest it on soft foam packaging or similar material to avoid damaging the backboard of the refrigerator. To reverse the door, the following steps are generally recommended.

  1. Stand the refrigerator upright. Open the upper door to take out all door racks (to avoid racks damaged) and then close the door.                                          FIG 6 Reversing the door
  2. Open part (1) on top of the refrigerator body from right side and then take down part (3) and part (4) on the upper door in the same way. Take down part (2) and put it back to the plastic bag.                                                                              FIG 7 Reversing the door      FIG 8 Reversing the door
  3. Disconnect electrical connector (1) as well as electrical connector (2) and then take down part (3).                                                                             FIG 9 Reversing the door
  4. Remove the screws (1), loose wire (2), and remove par (3).           FIG 10 Reversing the door  Note: Please hold the upper door by hand during step 4 to prevent door dropping.
  5. Remove the upper door and place it on a smooth surface with its panel upwards. Lever part (1) and part (4), then loose screws (2), as shown in the picture. Change handle (3) to the right side, then install screws (2), part (1) and part (4) in turn. Loose screws (7), detach part (6) and part (5) then install part (5) and another part (6) in the plastic bag)to the left side with screws (7). Put part (6) just detached back to plastic bag. FIG 11 Reversing the door                                    FIG 12 Reversing the door
  6. Loose screws used to fix the middle hinge and remove middle hinge. Then remove the lower door.                                                                            FIG 13 Reversing the door
  7. Place the lower door on a smooth surface with its panel upwards. Change the handle to the right side according to step 5. Loose screws (7), detach part (6) and part (5). Turn part (5) by 180°and then install part (5) and part (6) to corresponding position on left side together with screws (7).                                                                     FIG 14 Reversing the door                                       FIG 15 Reversing the door
  8. Change screw hole covers on middle cover plate from left to right (as shown in figure below).                                                                                     FIG 16 Reversing the door
  9. Place refrigerator flat wise, remove part (3) and then loose screws (4). Remove part (2) and part (1).                                                                                   FIG 17 Reversing the door
  10. Screw out lower hinge, change it to the near hole site, and then screw up and mount washer.
  11. Just remount to the step 9, change part (1) to left and part (2) to right and then fix them with screws (4) . Finally install part (3).                                     FIG 18 Reversing the door
  12. Move the lower door and adjust its position to align lower hole site and upper hinge axis. Turn the middle hinge by 180, change the washer on the axis to the upper side, adjust the middle hinge to the appropriate position and then install it. FIG 19 Reversing the door
  13. Screw out The upper hinge axis, turn the upper hinge over and fix axis on it. Then place it at side for use.                                                                        FIG 20 Reversing the door
  14. Exchange wires both in the left and right slots of the refrigerator body. FIG 21 Reversing the door
  15. Move the upper door to appropriate position, adjust part (1) and upper door, Move the connecting wire (2) in the slot of upper door from right to left, and then fix part (1) and wire (2) by screws (3). (Please hold upper door by hand when installing) FIG 22 Reversing the door
  16. Connect electrical connector (1) in accordance with step 3 and then install part (2) (which is in the plastic bag).                                                                FIG 23 Reversing the door
  17. Reverse part (1) by 180°and install it onto the right corner of upper door, then mount part (2). (both of which are taken down in step 2)                       FIG 24 Reversing the door
  18. Take the reed switch out of the coping block(part (3) 6 in step 3)and mount it on another block for use (which is with mark “R” in the plastic bag). Put the coping block just removed back to the plastic bag.                                                        FIG 25 Reversing the door                                                                                                                                         Note: Be sure character side of reed switch fits well with coping block.
  19. Install part (1) , connect the wire connector (2), and then install part (3). FIG 26 Reversing the door
  20. Open the upper door, mount door racks and then close it.

 

Description of the appliance

FIG 27 Description of the appliance

  1. Cabinet
  2. LED light
  3. Flexible wine rack
  4. Glass shelf
  5. Crisper cover
  6. Fruit and vegetables crisper
  7. My fresh choice
  8. Twist ice maker
  9. Upper freezer drawer
  10. Upper freezer glass shelf
  11. Middle freezer drawer(huge box)
  12. Middle freezer glass shelf
  13. Lower freezer drawer
  14. Adjustable bottom feet
  15. Fridge door
  16. Covered dairy rack
  17. Egg tray
  18. Middle rack
  19. Bottle holder
  20. Bottle rack
  21. Fridge door seal
  22. Handle
  23. Freezer door seal
  24. Freezer door

Optional part list

FIG 28 Optional part list

Note: Due to unceasing modification of our products, your refrigerator may be slightly different from this instruction manual, but its functions and using methods remain the same. To get more space in the freezer, you can remove drawers (except lower freezer drawer), installation bracket and integrative ice maker/twistable ice tray.

FIG 29 Description of the appliance View 2

  1. Cabinet
  2. LED light
  3. Flexible wine rack
  4. Glass shelf
  5. Folded shelf
  6. Crisper cover
  7. Fruit and vegetables crisper
  8. My fresh choice
  9. Twist ice maker
  10. Upper freezer drawer
  11. Upper freezer glass shelf
  12. Middle freezer drawer(huge box)
  13. Middle freezer glass shelf
  14. Lower freezer drawer
  15. Adjustable bottom feet
  16. Fridge door
  17. Covered dairy rack
  18. Egg tray
  19. Middle rack
  20. Bottle holder
  21. Bottle rack
  22. Fridge door seal
  23. Handle
  24. Installation bracket
  25. Freezer door seal
  26. Freezer door

Optional part list

FIG 30 Optional part list

Note: Due to unceasing modification of our products, your refrigerator may be slightly struction manual, but its functions and using methods remain the same. To get more space in the freezer, you can remove drawers (except lower freezer drawer), installtion bracket and integrative ice maker/twistable ice tray.

 

Display controls

Use your appliance according to the following control regulations, your appliance has the corresponding functions and modes as the control panels showed in the pictures below. When the appliance is powered on for the first time, the backlighting of the icons on display panel starts working. If no buttons have been pressed and the doors are closed, the backlighting will turn off.

FIG 31 Display controls

Controlling the temperature

We recommend that when you start your refrigerator for the first time, the temperature for the refrigerator is set to 4°C and the freezer to -18°C. If you want to change the temperature, follow the instructions below.

Caution! When you set a temperature, you set an average temperature for the whole refrigerator cabinet. Temperatures inside each compartment may vary from the temperature values displayed on the panel, depending on how much food you store and where you place them. Ambient temperature may also affect the actual temperature inside the appliance.

1. Fridge

Press “Fridge” to set fridge temperature between 2°C and 8°C as needed, and control panel will display corresponding values according to the following sequence.

FIG 32 Controlling the temperature

FIG 33 Controlling the temperature

2. My fresh choice

There are three modes for my fresh choice function. You can select different modes according to your requirements by pressing the button “My fresh choice” on the control panel, and the corresponding icon will be illuminated.

FIG 34 My fresh choice

Vege.(Vega Symbol)

  • When vege. Mode is selected, the light will be illuminated and the My Fresh Choice compartment will be set at 3°C.

Zero zone. ( Zero zone symbol )

  • When Zero zone Mode is selected, the light will be illuminated and the My Fresh Choice compartment will be set at 0°C.

Meat (Meat symbol)

When meat Mode is selected, the light will be illuminated and the My Fresh Choice compartment will be set at -2°C.

3. Super Cool

Super Cool symbolSuper Cool can refrigerate your food much faster, Super Cool keeping food fresh for a

longer period.

  • Press” Super Cool” button to activate this function. The light will be illuminated.
  • Super cool automatically switches off after 6 hours and the refrigerator temperature setting displays 2°C. .
  • When super cool function is on you can switch it off by pressing “Super Cool” or “Refrigerator” button and the refrigerator temperature setting will revert back to the previous setting.

4. Freezer

Press “Freezer” to set freezer temperature between -14°C and -24°C as needed, and the control panel will display corresponding value according to the following sequence.

FIG 35 Freezer

5. Super Freeze

Super Freeze symbolSuper Freeze will quickly lower the temperature within the freezer so food will freeze vitamins and nutrients of fresh food and keep food fresh longer.

  • Press “Super Freeze” button to activate the super freeze function. The light will come on.
  • In case of the maximum amount of food to be frozen, please wait about 24 h.
  • Super freeze automatically switches off after 26 hours and the freezer temperature setting displays -24°C.
  • When super freeze function is on you can switch off super freeze function by pressing “Super Freeze” or “Freezer” button and the freezer temperature setting will revert back to the previous setting

6. Holiday

Holiday SymbolIf you are going to be away for a long period of time, you Holiday can activate this function by pressing “Holiday” button for 3 seconds until the light comes on.

  • When the holiday function is activated, the temperature of the refrigerator is automatically switched to 15°C to minimize the energy consumption.                                                       Important! Do not store any food in the fridge during this time.
  • When the holiday function is on, you can switch it off by pressing any button of “Holiday”, “Fridge” and “Super Cool” button. The fridge temperature setting will revert back to the previous setting.

7. Alarm

In case of alarm, “Alarm” icon will be on and there will be buzzing sound. Press “Alarm” key to clear alarm and then “Alarm” icon will turn off and stop buzzing.

Door Alarm

  • When the door of fridge or freezer is open for over 2 minutes, the door alarm will sound. In case of door alarm, buzzer will sound 3 times every 1 min and will stop alarming automatically after 10 minutes.
  • To save energy, please avoid keeping the door open for a long time when using the appliance. The door alarm can also be cleared by closing the fridge door. Temperature alarm
  • If freezer temperature is too high due to power failure or other reasons, there will be a temperature alarm and the freezer temperature setting displays “– ” or nothing.
  • In case of temperature alarm, buzzer will sound constantly for 10 times and then stop automatically.
  • In case of temperature alarm, press “Alarm” button for 3 seconds to check the highest freezer temperature. The temperature value and “Alarm” icon will according to the model. Caution! When power is restored, it is normal that the temperature alarm appears, this can be cleared by pressing “Alarm”.

 

Using your appliance

You appliance has the accessories as the “Description of the appliance”showed in general, with this part instruction you can have the right way to use them.

Door rack

  • It is suitable for the storage of eggs, canned liquid, bottled drinks and packed food, etc. Do not place too many heavy things in the racks
  • The middle door shelf can be placed at different heights according to your requirements. Please take food out of the shelf.

FIG 36 Door rack

Note: There are egg trays in the upper shelf and bottle holder in the lower shelf.

Shelf in Refrigerator chamber

  • There are shelves in refrigerator chamber, and they can be taken out to be cleaned.

FIG 37 Shelf in Refrigerator chamber

Folded shelf.

  • It is made up of fixed part and flexible part. .
  • It can be adjusted and folded to achieve different storage volume as you need. See the picture

FIG 38 Folded shelf.

Note: If you want to spread out  the folded shelf, please press the outer verge of the flexible part first.

Bottle rack

It is for storing bottled wine or drinks.

It can also slide along the shelf if required.

FIG 39 Bottle rack

Note: Please use gentle pressure on left or right side face to move the Bottle rack along the shelf.

  • Wine rack can be folded up to save space.

FIG 40 Bottle rack

  • If required, it can also be taken out with its hanger allowing you to adjust the shelf at different heights and save space.

Crisper cover

  • It is for controlling the temperature of the crisper and

Crisper of refrigerator chamber

  • It is suitable for the storage of fruits and vegetable.

My fresh choice

  • The temperature there can be set at -2°C ,0°C and 3°C to meet customers’ demand.
  • It can store various kinds of food including cheese, meat, fish, fruits, vegetables and other perishable food under proper temperature.

Note: Bottled or canned drinks are not allowed to be stored there.

Moisture 0 Cool

  • The temperature there is about 23°C lower than that in the refrigerator chamber.
  • It is used to store fish, meat and other erodible food.

Note: When selecting the Super Freeze function, ensure there is no bottled or canned liquid which could explode caused by volume expanding.

FIG 41 Moisture 0 Cool

Integrative ice maker

  • It is used for making ice.
  • It is a removable accessory which can be taken out to save space. There is an ice maker cover to keep the ice maker clean.

FIG 42 Integrative ice maker

Note: If the ice maker is used for the first time or has not been used for a long time, please clean it before using.

Ice-making process.

FIG 43 Ice-making process

  • Pour water into the ice tray and Pour water into the ice trays and the water level shall not exceed the top line as the follow picture shows.

FIG 44 Ice-making process

  • Place the ice maker in its original position. After the cubes are formed, gently twist the tray to separate the cubes and trays.

FIG 45 Ice-making process

Twistable ice tray

Note: If the ice tray is used for the first time or has not been used for a long time, please clean it before using.

The twist ice tray is used to make and deposit ice cubes. You should use it as follows.

  1. Pull out the twistable ice tray from the installation bracket.
  2. Pour water into the ice trays and the water level shall not exceed the maximum line. FIG 46 Twistable ice tray
  3. Place the filled ice tray back to the bracket.
  4. When ice cubes form, twist the knobs clockwise and the ice will drop into the ice box below.
  5. Ice cubes can be stored in the ice box, if you need them, you can pull out the ice box and take them out.

FIG 47 Twistable ice tray

 

Helpful hints and tips

Energy saving tips

We recommend that you follow the tips below to save energy.

  • Try to avoid keeping the door open for long periods in order to conserve energy.
  • Ensure the appliance is away from any sources of heat (Direct sunlight, electric oven or cooker etc).
  • Don’t set the temperature colder than necessary.
  • Don’t store warm food or evaporating liquid in the appliance.
  • Place the appliance in a well ventilated, humidity free, room. Please refer to Installing your new appliance chapter.
  • If the diagram shows the correct combination for the drawers, crisper and shelves, do not adjust the combination as this is designed to be the most energy efficient configuration.

Hints for fresh food refrigeration

  • Do not place hot food directly into the refrigerator or freezer, the internal temperature will increase resulting in the compressor having to work harder and will consume more energy.
  • Do cover or wrap the food, particularly if it has a strong flavor.
  • Place food properly so that air can circulate freely around it.

Hints for refrigeration

  • Meat (All Types) Wrap in polythene food: wrap and place on the glass shelf above the vegetable drawer. Always follow food storage times and use by dates suggested by manufacturers.
  • Cooked food, cold dishes, etc.: They should be covered and may be placed on any shelf. •
  • Fruit and vegetables: They should be stored in the special drawer provided.
  • Butter and cheese: Should be wrapped in airtight foil or plastic film wrap.

Film wrap.

  • Milk bottles: Should have a lid and be stored in the door racks.

Hints for freezing

  • When first starting-up or after a period out of use, let the appliance run at least 2 hours on the higher settings before putting food in the compartment.
  • Prepare food in small portions to enable it to be rapidly and completely frozen and to make it possible to subsequently thaw only the quantity required.
  • Wrap up the food in aluminum foil or polyethylene food wraps which are airtight,
  • Do not allow fresh, unfrozen food to touch the food which is already frozen to avoid temperature rise of the latter.
  • Iced products, if consumed immediately after removal from the freezer compartment, will probably cause frost burns to the skin.
  • It is recommended to label and date each frozen package in order to keep track of the storage time.

Hints for the storage of frozen food

  • Ensure that frozen food has been stored correctly by the food retailer.
  • Once defrosted, food will deteriorate rapidly and should not be re-frozen. Do not exceed the storage period indicated by the food manufacturer.

Switching off your appliance

If the appliance needs to be switched off for an extended period, the following steps should be taken prevent mould on the appliance.

  1. Remove all food.
  2. Remove the power plug from the mains socket.
  3. Clean and dry the interior thoroughly.
  4. Ensure that all the doors are wedged open slightly to allow air to circulate.

 

Cleaning and care

For hygienic reasons the appliance (including exterior and interior accessories) should be cleaned regularly at least every two months.

Caution! The appliance must not be connected to the mains during cleaning. Danger of electrical shock! Before cleaning switch the appliance off and remove the plug from the mains socket.

Exterior cleaning

To maintain good appearance of your appliance, you should clean it regularly.

  • Wipe the digital panel and display panel with a clean, soft cloth.
  • Spray water onto the cleaning cloth instead of spraying directly on the surface of the appliance. This helps ensure an even distribution of moisture to the surface.
  • Clean the doors, handles and cabinet surfaces with a mild detergent and then wiped dry with a soft cloth. Caution!
  • Don’t use sharp objects as they are likely to scratch the surface.
  • Don’t use Thinner, Car detergent, Clorox, ethereal oil, abrasive cleansers or organic solvent such as Benzene for cleaning. They may damage the surface of the appliance and may cause fire.

Interior cleaning

You should clean the appliance interior regularly. It will be easier to clean when food stocks are low. Wipe the inside of the fridge freezer with a weak solution of bicarbonate of soda, and then rinse with warm water using a wrung-out sponge or cloth. Wipe completely dry before replacing the shelves and baskets.

Thoroughly dry all surfaces and removable parts.

Although this appliance automatically defrosts, a layer of frost may occur on the freezer compartment’s interior walls if the freezer door is opened frequently or kept open too long. If the frost is too thick, choose a time when the supply of food stocks are low and proceed as follows:

  1. Remove existing food and accessories baskets, unplug the appliance from the mains power and leave the doors open. Ventilate the room thoroughly to accelerate the thawing process.
  2. When defrosting is completed, clean your freezer as described above.                              Caution! Don’t use sharp objects to remove frost from the freezer compartment. Only after the interior is completely dry should the appliance be switched back on and plugged back into the mains socket.

Door seals cleaning

Take care to keep door seals clean. Sticky food and drinks can cause seals to stick to the cabinet and tear when you open the door. Wash seal with a mild detergent and warm water. Rinse and dry it thoroughly after cleaning.

Caution! Only after the door seals are completely dry should the appliance be powered on.

Replacing the LED light:

Warning: The LED light must not be replaced by the user! If the LED light is damaged, contact the customer helpline for assistance. To replace the LED light, the below steps can be followed:

  1. Unplug your appliance.
  2. Remove light cover by pushing up and out.
  3. Hold the LED cover with one hand and pull it with the other hand while pressing the connector latch.
  4. Replace LED light and snap it correctly in place.

 

Troubleshooting

If you experience a problem with your appliance or are concerned that the appliance is not functioning correctly, you can carry out some easy checks before calling for service, please see below. You can carry out some easy checks according to this section before calling for service.

Warning! Don’t try to repair the appliance yourself. If the problem persists after you have made the checks mentioned below, contact a qualified electrician, authorized service engineer or the shop where you purchased the product.

FIG 48 Troubleshooting

FIG 49 Troubleshooting

 

Disposal of the appliance

It is prohibited to dispose of this appliance as household waste.

Packaging materials

Packaging materials with the recycle symbol are recyclable. Dispose of the packaging into a suitable waste collection container to recycle it.

Before disposal of the appliance

  1. Pull out the mains plug from the mains socket.
  2. Cut off the power cord and discard with the mains plug

Warning! Refrigerators contain refrigerant and gases in the insulation. Refrigerant and gases must be disposed of professionally as they may cause eye injuries or ignition. Ensure that tubing of the refrigerant circuit is not damage prior to proper disposal.

Correct Disposal of this product

Dustbin iconThis symbol on the product or in its packing indicates that this product may not be treated as household waste. Instead, it should be taken to the appropriate waste collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by the inappropriate waste handling of this product. For more detailed information about the recycling of this product, please contact your local council your household waste disposal service, or the shop where you purchased the product.

 

 

Read More About This Manual & Download PDF:

Hisense RB400N4BC3 Hisense Refrigerator User Menual – Download [optimized]
Hisense RB400N4BC3 Hisense Refrigerator User Menual – Download

Questions about your Manual? Post in the comments!

References

Leave a comment

Your email address will not be published. Required fields are marked *