TOPDON TopScan Moto Diagnostic Tool
OVERVIEW
- Thank you for purchasing the TOPDON TopScan Moto.
- This quick user guide will walk you through the basic setup and operation of the TopScan Moto wireless diagnostic tool.
- For the best user experience, carefully read and follow all the instructions and warnings.
Download & Install the APP
- For iOS: Search for “TopGuru” in the App Store to download and install.
- For Android: Search for “TopScan” in Google Play to download and install.
Register & Log In
Open the app and log in to your TOPDON account. (If you do not have an account, please register with your email.)
Bind the VCI
- Tap Me > Device Management > Add VCI.
- To get the serial number and activation code, please scan the QR code on the product.
- (Alternatively, once the Bluetooth connection between the TopScan Moto and your phone is established, the serial number and activation code will be automatically recognized.) Then, tap Activate.
Select the Free Software
- You will need to select a motorcycle to download the free software.
- Tap Select Now. Then select a motorcycle make and confirm. (It cannot be changed once selected. Please select carefully.)
- Note: If you do not select the free software for a motorcycle make, you will be redirected to the free software selection page each time you select ‘Diagnostics’.
Download the Diagnostic Software
The system will start downloading the selected software.
Plug the TopScan Moto into the DLC of your motorcycle
- The Data Link Connector (DLC) of a motorcycle is typically located under the seat or near the engine (see the figure above).
- Note: If the DLC of your motorcycle is not an OBD-ll port, an adapter is required (not included) to connect the TopScan Moto to your motorcycle.
Turn the ignition to the “ON” position
The red LED light on the TopScan Moto indicates it is powered on.
Bluetooth Connection
- Tap Diagnostics on the home screen, then tap VCP at the top right of the screen to establish a Bluetooth connection with the unit.
- When a connection is established, the LED light on the unit will turn solid blue.
- Your TopScan Moto is now ready for use.
Update
- The installed diagnostic software can be seen on the software download page. When a new version is available, an Update button will display. Tap the button to update the software.
- For firmware updates, tap Me > Firmware Update to update the firmware if a new version is available.
FAQ
What should I do if a communication error occurs?
Follow the steps below to identify the problem Check if the ignition is ON. Check if the TopScan Moto is securely plugged into the motorcycle's DLC. Turn the ignition off. Then, turn it on after 10 seconds and continue the operation. Check if the motorcycle's control module is defective.
Why do I need to download the diagnostic software after installing the app?
Since there are various motorcycle manufacturers, different diagnostic software is required for different brands.
Do I need to update the firmware before using it for the first time?
Yes. Firmware will automatically update to the latest version once the TopScan Moto is connected to your phone via Bluetooth. You can also tap Me Firmware Update to update the firmware manually.
Can multiple devices be bound to one account?
Yes.
FCC
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference,
- this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
- TEL 86-755-21612590 1-833-629-4832 (North America)
- EMAIL SUPPORT@TOPDON.COM
- WEBSITE WWW.TOPDON.COM
- FACEBOOK @TOPDONOFFICIAL
- TWITTER @TOPDONOFFICIAL
Documents / Resources
 |
TOPDON TopScan Moto Diagnostic Tool [pdf] User Guide TopScan Moto Diagnostic Tool, TopScan Moto, TopScan Moto Diagnostic, Diagnostic, TopScan Diagnostic Tool, TopScan, Diagnostic Tool |
