GARMIN Dash Cam 45/ 55/ 65W Owner’s Manual

GARMIN

GARMIN DASH CAM™ 45/55/65W Owner’s Manual

© 2017 Garmin Ltd. or its subsidiaries
All rights reserved. Under the copyright laws, this manual may not be copied, in whole or in part, without the written consent of Garmin. Garmin reserves the right to change or improve its products and to make changes in the content of this manual without obligation to notify any person or organization of such changes or improvements. Go to www.garmin.com for current updates and supplemental information concerning the use of this product.

Garmin® the Garmin logo, and VIRB® are trademarks of Garmin Ltd. or its subsidiaries, registered in the USA and other countries. Garmin Dash Cam™, Garmin Express™, and Travelapse™ are trademarks of Garmin Ltd. or its subsidiaries. These trademarks may not be used without the express permission of Garmin.
microSD™ and the microSD logo are trademarks of SD-3C, LLC. Wi‑Fi® is a registered mark of Wi-Fi Alliance Corporation.
M/N: A03110, AA3110

Getting Started

WARNING 

See the Important Safety and Product Information guide in the product box for product warnings and other important information.

Installing the Memory Card

The camera requires a microSD™ or microSDHC memory card of up to 64GB with a speed rating of class 10 or higher. You can use the included memory card, or you can purchase a  compatible replacement memory card from an electronics supplier.

1 Insert the memory card 1 into the slot 2
2 Press it in until it clicks.
Removing the Memory Card

NOTICE
Removing the memory card while the device is turned on can result in a loss of data or damage to the device.

1 Turn off the device.
2 Press the card in until it clicks.
3 Release the card.
The card ejects from the slot.

Device Overview

1		Press to turn the device on. Hold for 3 seconds to turn the device off. Select to return to the previous page.
2		Select to scroll through menus or pages.
3		Select to scroll through menus or pages.
4		From the viewfinder, select to save a photo. Hold to save a video clip. Select to choose an option in a menu.

Installing the Mount onto Your Windshield 

NOTICE
The adhesive mount is extremely difficult to remove after it is installed. You should carefully consider the mounting location before you install the mount.

Before you can install the adhesive mount onto your windshield,  the ambient temperature must be from 21° to 38°C (from 70° to  100°F).

TIP: You can connect the device to power and hold the device in the preferred mounting location to check the camera’s field of view at that location.

1. Clean the windshield using water or alcohol, and a lint-free cloth.
   The windshield must be free of dust, wax, oils, or coatings.
2. Remove the protective film from the mount adhesive.
   
3. Position the mount over the mounting location. TIP: The adhesive is extremely sticky. Do not touch the adhesive to the windshield until the mount is properly positioned and aligned. 
4. Press the mount firmly onto the windshield, and maintain pressure for 30 seconds.
   
5. Pull the camera and mount away from the windshield. The metal disc remains attached to the windshield.
6.  Using your finger, press firmly on the disc for 30 seconds. This helps to ensure the disc adhesive has proper contact with the windshield.
7. Wait 24 hours before installing the Garmin Dash Cam. It takes 24 hours for the adhesive to bond properly to the windshield. 

Installing and Setting Up the Garmin Dash  Cam

NOTICE 

Before installing the Garmin Dash Cam, you must install the mount and allow the adhesive to bond to the windshield for 24  hours. Failure to allow adequate bonding time may cause the mount to detach from the windshield, which could result in damage to the product or mount.

1. Place the camera and mount it onto the metal disc.
2.  Plug the vehicle power cable into the USB port on the device.
   
3. Route the power cable to your vehicle power outlet. The included vehicle power cable is designed to be routed out of sight. It is long enough to route around the windshield in most vehicles, and you can hide the thin cable along or behind the trim or headliner.
4. Plug the other end of the vehicle power cable into a power outlet in your vehicle.
5. If necessary, turn on the vehicle ignition switch to provide power to the power outlet in your vehicle.
   The device turns on.
6. Follow the on-screen instructions to complete the initial device setup.
   The camera view appears.
7. Adjust the position of the camera to capture the desired field of view.

Setting the Camera Placement

You can mount the device in the left, center, or right of your windshield. For the best performance, you should set the  Camera Placement option to indicate the location of your device in the vehicle.

1. Select Settings > Driver Assistance > Camera Placement.
2. Select Horizontal Placement, and select the horizontal placement of your camera.
3. Select Vehicle Height.
4. Select an option:
   • If you are driving a large vehicle, like a full-size van or truck, select Tall.
   • If you are driving a car, select Normal.

Turning On the Device Manually

NOTE: When the device is connected to an ignition-switched power outlet, it turns on automatically when you turn on the vehicle.

Select.
The device turns on.

Turning Off the Device Manually

NOTE: When the device is connected to an ignition-switched power outlet, it turns off automatically when you turn off the vehicle.

Hold for 3 seconds.
The device turns off.

Dash Cam Recording

NOTICE
Some jurisdictions regulate or prohibit use of this device. It is your responsibility to know and comply with applicable laws and rights to privacy in jurisdictions where you plan to use this device.
Before you can record video, you must install a camera memory card (Installing the Memory Card, page 1).
By default, the device immediately starts recording video when it turns on. It continues recording, overwriting the oldest, non-saved video until it turns off.

Saving a Video Recording

By default, the device uses a sensor to detect a possible incident and saves video footage automatically before, during,  and after the detected event. You can also save video files manually at any time.

Hold.
The device saves the video footage before, during, and after you select.
The memory card has limited storage. After you save a video recording, you should transfer the recording to your computer or other external storage location for permanent storage (Videos and Photos on Your Computer, page 3).

Taking a Picture

You can take a picture with this device.
From the viewfinder, select.
The device saves the picture to the memory card.

Event Detection

By default, the device uses a sensor to detect possible incidents and saves video footage automatically before, during, and after the detected event. The video footage is stamped with the time,  date, and location of the event.

Viewing Videos and Pictures

NOTE: The device stops recording and alerts are disabled while viewing videos or pictures.

1. Select > Gallery.
   
2. Select an option:
   • To view videos you saved, select Saved Videos.
   • To view parked videos you saved, select Parked Videos.
   • To view saved photos, select Pictures.
   • To view Travelapse™ video footage, select Travelapse.
   • To view recent video footage that has not been saved,  select Unsaved Videos.
3. Select a video or photo.
   

Connecting the Device to Your Computer 

You can view videos and photos on your computer using a  micro-USB cable.

1. Plug the small end of the micro-USB cable into the port on the device.
2. Plug the larger end of the micro-USB cable into a port on your computer.
   Depending on your computer operating system, the device appears as either a removable drive or a removable volume.

Connecting the Device to Garmin® VIRB® App 

You can save pictures and video recordings by connecting your smartphone or tablet to the free Garmin VIRB App. To download the Garmin VIRB app, or for more information, go to garmin.com /VIRBapp.

1. From the application store on your mobile device, install the  Garmin VIRB app.
2. From the main menu on the Dash Cam, select Gallery >  Share Gallery.
   The Garmin Dash Cam displays the network name and network password.
3. From your mobile device, select the Dash Cam Wi‑Fi® network.
4. Enter the network password.
   Your Dash Cam shares saved photos and video to your mobile device.
5. On your mobile device, launch the Garmin VIRB app.

Updating the Camera Using the Garmin VIRB App 
You can update the camera software using the Garmin VIRB  mobile app. After you pair the app with your camera, the app checks for updates automatically and displays a message when an update is available.

1. From the Garmin VIRB app, when an update is available,  select Download.
2. Follow the on-screen instructions to complete the update process.

Deleting a Video or Photo

• While viewing a video, select > Delete > Yes.
• While viewing a photo, select > Yes.

Videos and Photos on Your Computer

NOTE: Some media players might not support high-resolution playback.

Videos and photos are stored in the DCIM directory on the camera memory card. Videos are stored in MP4 file format, and photos are stored in JPG format. You can view and transfer photos and videos by connecting the memory card or the device to your computer (Connecting the Device to Your Computer,  page 2).
The videos and photos are sorted into several folders.
100EVENT: Contains videos saved automatically when the device detects an incident.
101PHOTO: Contains photos.
102SAVED: Contains videos saved manually by the user. 103PARKM: Contains videos saved while parked. 104TLPSE: Contains Travelapse videos.
105UNSVD: Contains unsaved video footage. The device overwrites the oldest unsaved video when the storage space for unsaved videos is full.

Video Resolution Settings

You can change the video resolution on your camera.  Resolution is the height of the video in pixels. Higher resolution video settings require more memory card space than lower resolution settings.

Select Settings > Camera > Resolution.
1440p, 30fps: Records video in 1440p resolution at 30 frames  per second.
NOTE: 1440p resolution at 30 frames per second is not available for the Garmin Dash Cam 45 product model.
1080p, 60fps: Records video in 1080p resolution at 60 frames  per second.
NOTE: 1080p resolution at 60 frames per second is not available for the Garmin Dash Cam 45 product model.
1080p, 30fps, HDR: Records video in 1080p resolution at 30  frames per second using high dynamic range (HDR) imaging.  HDR imaging records multiple exposure levels for each frame and can improve video clarity in high contrast or low-light conditions.
NOTE: 1080p resolution at 30 frames per second using high dynamic range (HDR) imaging is not available for the Garmin  Dash Cam 45 product model.
1080p, 30fps: Records video in 1080p resolution at 30 frames  per second.
720p, 30fps: Records video in 720p resolution at 30 frames per  second.

Travelapse

The Travelapse feature captures a fast-motion video of your trip,  which allows you to share a short video of all the places you traveled.
NOTE: Recording Travelapse does not stop dashcam recording.

Voice Control

NOTE: The voice control feature is not available for the Garmin  Dash Cam 45 product model.
The voice control feature allows you to control your camera by saying words and commands.
NOTE: The voice control feature is not available for all languages. You can use this feature while the interface is set to an unsupported language, but you must speak the commands in  English.

Controlling the Camera Using Voice  Commands

NOTE: The voice control feature is not available for the Garmin  Dash Cam 45 product model.

1. Say OK, Garmin to activate the voice control feature. The camera plays a tone and starts listening for a command. 2 Say a command:
   • To save a video, say Save Video.
   • To take a picture, say Take a Picture.
   • To record audio with the video, say Record Audio.
   • To record video without audio, say Stop Audio.
   • To start Travelapse, say Start Travelapse.
   • To stop Travelapse, say Stop Travelapse.

The camera plays a tone when it recognizes your command.

Turning Voice Control On or Off

Select > Voice Control > Settings > Disable.

Voice Control Tips

• Speak in a normal voice directed at the device. 
• Reduce background noise to increase the accuracy of the voice recognition.
• Before each command, say OK, Garmin.
• Listen for a tone to confirm that the camera successfully recognized a command.

Red Light and Speed Cameras

NOTICE
Garmin is not responsible for the accuracy of or the consequences of using a red light or speed camera database.
NOTE: This feature is not available for all regions or product models.
Information about red light and speed camera locations is available in some areas for some product models. The device alerts you when you approach a reported speed or red light camera.

• To maintain an updated database of red light and speed camera locations, you must purchase a subscription to download and store safety camera data on your device. Go to garmin.com/speedcameras to check availability and compatibility, or to purchase a subscription or one-time update. You can purchase a new region or extend an existing subscription at any time.
• In some regions, some product bundles include pre-loaded red light and speed camera data with lifetime updates.
• You can use the Garmin Express™ software (garmin.com /express) to update the camera database stored on your device. You should update your device frequently to receive the most up-to-date camera information.

Forward Collision Warning System

WARNING 

The forward-collision warning system (FCWS) feature is for information only and does not replace your responsibility to observe all road and driving conditions, abide by all traffic regulations, and use safe driving judgment at all times. The  FCWS relies on the camera to provide a warning of upcoming vehicles and, as a result, may have limited functionality in low visibility conditions. For more information, go to garmin.com/warnings.
NOTE: This feature is not available in all areas or for all product models.

The FCWS feature alerts you when the device detects that you are not maintaining a safe distance between your vehicle and the vehicle in front of you. The device determines your vehicle speed using GPS, and it calculates an estimated safe following distance based on your speed. The FCWS activates automatically when your vehicle speed exceeds 48 km/hr  (30 mph).

When the device detects that you are too close to the vehicle ahead of you, the device plays an audible alert, and a warning appears on the screen.

Forward Collision Warning System  Performance Tips

Several factors affect the performance of the forward collision warning system (FCWS). Some conditions may prevent the  FCWS feature from detecting a vehicle ahead of you.

• The FCWS feature activates only when your vehicle speed exceeds 50 km/h (30 mph).
• The FCWS feature may not detect a vehicle ahead of you when the camera’s view of the vehicle is obscured by rain,  fog, snow, sun or headlight glare, or darkness.
• The FCWS feature may not function properly if the camera is incorrectly aligned (Setting the Camera Placement, page 2). • The FCWS feature may not detect vehicles greater than 40 m  (130 ft.) away or closer than 5 m (16 ft.).
• The FCWS feature may not function properly if the camera placement settings do not correctly indicate your vehicle height or the placement of your device in the vehicle (Setting the Camera Placement, page 2).

Lane Departure Warning System

WARNING
The lane departure warning system (LDWS) feature is for information only and does not replace your responsibility to observe all road and driving conditions, abide by all traffic regulations, and use safe driving judgment at all times. The  LDWS relies on the camera to provide warnings for lane markers and, as a result, may have limited functionality in low visibility conditions. For more information, go to garmin.com/warnings.

The LDWS feature alerts you when the device detects you may be crossing a lane boundary unintentionally. For example, the device alerts you if you cross some solid painted lane boundaries or cross into an oncoming traffic lane. The LDWS  feature provides alerts only when your vehicle speed exceeds  64 km/h (40 mph). The alert appears on the left or right side of the screen to indicate which lane boundary you crossed.

NOTE: For the best LDWS performance, you should set the  Camera Placement option to indicate the location of your device in the vehicle.

Lane Departure Warning Performance Tips

Several factors affect the performance of the lane departure warning system (LDWS). Some conditions may prevent the  LDWS feature from detecting lane departures.

• The LDWS feature provides alerts only when your vehicle speed exceeds 65 km/h (40 mph).
• The LDWS feature does not provide alerts on certain types of roads, such as highway ramps or merging lanes.
• The LDWS feature may not function properly if the camera is incorrectly aligned.
• The LDWS feature may not function properly if the camera placement settings do not correctly indicate your vehicle height or the placement of your device in the vehicle (Setting the Camera Placement, page 2).
• The LDWS feature requires a clear, continuous view of the lane divider lines.
  • Lane departures may not be detected when divider lines are obscured by rain, fog, snow, extreme shadows, sun or headlight glare, road construction, or any other visual obstruction.
  • Lane departures may not be detected if lane divider lines are misaligned, missing, or heavily worn.
• The LDWS feature may not detect lane departures on extremely wide, narrow, or winding roads.

Go Alert

The go alert plays a tone and displays an alert when stopped traffic ahead of your vehicle starts moving again. This alert appears only after the vehicle ahead has moved a substantial distance and your vehicle has remained stopped. This can be useful at stoplights or in traffic delays. This feature uses the dash camera to detect the stopped or moving vehicle and requires a clear view of the road.

Garmin Dash Cam Settings

Camera Settings

Select > Settings > Camera.
Resolution: Adjusts the video resolution.
Event Detection: Turns on and off event detection (Event  Detection, page 2).
Record Audio: Turns on and off audio recording. This feature is not available in all areas or for all product models. Data Overlay: Adjusts the type of data displayed on videos and pictures.
Record After Power Loss: Sets the amount of time that the device continues to record video after power is turned off. Record While Parked: Allows the camera to record video while the vehicle is parked and turned off and sets the amount of time the camera remains active while parked. This feature is only available when the Dash Cam parking mode cable accessory is connected to the camera (Parked Video  Recording, page 6).

Format Card: Formats the memory card and deletes all videos,  photos, and data on the card.

Driver Assistance Settings

Select > Settings > Driver Assistance.
Camera Placement: Allows you to indicate the placement of your device in the vehicle (Setting the Camera Placement,  page 2).
Forward Collision: Adjusts the sensitivity of the FCWS feature. Go Alert: Turns on or off the go alert display and audible alerts when traffic starts moving (Go Alert, page 5).
Lane Departure: Adjusts the lane boundary settings (Lane  Departure Warning System, page 4).
Proximity Alerts: Adjusts the audible proximity alerts.

System Settings

Select > Settings > System.
Volume: Adjusts the volume of the camera alerts and video playback.
Brightness: Adjusts the viewfinder display brightness.
Color Mode: Allows you to select day or night color mode. If you select the Auto option, the device automatically switches to  day or night colors based on the time of day.
Display Timeout: Allows you to set the screen to stay on while the camera is receiving power or turn off after one minute of idle time.
Setup: Allows you to set the units of measure, time, and language, and restore them to their default values. About: Displays the software version number, the unit ID  number, and information about several other software features.
Regulatory: Displays regulatory and compliance information.

Device Setup

NOTICE
Deleted or overwritten files cannot be restored.
Select > Settings > System > Setup.
Units: Sets the unit of measure used for distances.
Time: Sets the time, date, and format for the time stamp.
Language: Sets all on-screen text to the selected language.
Restore: Restores all settings to the factory default values

Device Information

Support and Updates

Garmin Express (garmin.com/express) provides easy access to  these services for Garmin devices.

• Product registration
• Product manuals
• Software updates

Setting Up Garmin Express

1. Connect the device to your computer using a USB cable.
2. Go to www.garmin.com/express.
3. Follow the on-screen instructions.

Viewing Regulatory and Compliance  Information

From the system settings, select Regulatory.

Resetting the Device

You can reset your device if it stops functioning. Hold the power key for 12 seconds.

Specifications

Operating temperature  range	From -20° to 55°C (from -4° to 131°F)
Charging temperature  range	From 0° to 45°C (from 32° to 113°F)
Memory card	Class 10 or higher microSDHC up to 64 GB

Appendix

Changing the Fuse in the Vehicle Power  Cable

NOTICE
When replacing the fuse, do not lose any of the small pieces and make sure they are put back in the proper position. The vehicle power cable does not work unless it is assembled correctly.
If your device does not charge in your vehicle, you may need to replace the fuse located at the tip of the vehicle adapter.

1. Rotate the end piece À counter clockwise to unlock it
   
   TIP: You may need to use a coin to remove the end piece.
2.  Remove the end piece, the silvertip2, and the fuse 3.
3.  Insert a new fast-blow fuse that has the same current, such as 1 A or 2 A.
4. Place the silver tip in the end piece.
5. Push in the end piece and rotate it clockwise to lock it back into the vehicle power cable 4.

Parked Video Recording

The parked video recording feature enables automatic video recording when the vehicle ignition switch is turned off. The camera starts recording when the camera sensor detects motion.
NOTE: The parked video recording feature is only accessible when the camera is connected to the Dash Cam parking mode cable accessory. Go to buy.garmin.com to purchase accessories.

Turning Parked Recording On or Off
Before you can record parked videos, you must connect your camera to the Dash Cam parking mode cable accessory  (Parking Mode Cable Wiring Diagram, page 6).
Select > Settings > Camera > Record While Parked.

Recording Parked Videos
Before you can record parked videos, you must connect your camera to the Dash Cam parking mode cable accessory  (Parking Mode Cable Wiring Diagram, page 6).
Turn off your vehicle.
The camera enters parked recording mode and automatically records parked videos when the camera sensor detects motion.

Parking Mode Cable Wiring Diagram

Item	Wire Color	Wire Function
1	Black	Ground
2	Yellow	Battery 12 V
3	Red	Accessory 12 V

Connecting the Parking Mode Cable Accessory to Power

CAUTION
Garmin strongly recommends having an experienced installer with the proper knowledge of electrical systems install the device. Incorrectly wiring the power cable can result in damage to the vehicle or the battery and can cause bodily injury.

1. Route the parking mode cable accessory to a location in the vehicle with constant power, switched power, and a ground connection.
2. Connect the BATT wire to a constant power source.
3. Connect the ACC wire to a switched power source.
4. Connect the GND wire to the bare metal of the vehicle’s chassis using an existing bolt or screw.
5. Plug the parking mode cable accessory into the USB port on  the camera

Troubleshooting

My camera feels warm while it is operating 

It is normal for the camera to feel warm during typical use,  especially while it is recording high-resolution video or  transmitting a Wi‑Fi signal

support.garmin.com

GARMIN Dash Cam 45/ 55/ 65W Owner’s Manual – Download

References

• User Manual