HAWKLEY-logo

HAWKLEY NJK01B107 2007 2018 Wrangler JK4 Door and 2Door

HAWKLEY-NJK01B107-2007-2018-Wrangler-JK4-Door-and-2Door-product

Specifications

  • Model: NJK01B107
  • Material: Q235A
  • Product Dimensions: 61.5 x 13 x 811.5 inch
  • Package Dimensions: 64.6 x 16.1 x 11.4 inch
  • Product Weight: 30.4lbs

Product Usage Instructions

Required Tools

  • Socket
  • Ratchet
  • Wrench
  • Safety Glasses

Frequently Asked Questions 

  • Q: Is this Rear Bumper compatible with both Wrangler JK 4 Door and 2 Door models?
    • A: Yes, this Rear Bumper is compatible with both Wrangler JK 4 Door and 2 Door models from 2007 to 2018.

Specifications

Model: NJK01B107
Material: Q235A
Product Dimensions: 61.5 x 13 x 811.5 inch
Package Dimensions: 64.6 x 16.1 x 11.4 inch
Product Weight: 30.4lbs

Thank you for purchasing the REAR BUMPER. Please read this manual carefully and keep it properly if you need to refer to it afterward. If you need any support or assistance, please contact us with your product model number and order number, and our support team will help you solve problems.

Warning

This product is designed primarily to enhance the appearance of the vehicle. Do not rely in any way on the components of this product to protect against injury or death in the event of an accident. To reduce the risk of serious injury or property damage, please read all safety messages and understand all instructions and procedure notices before attempting to install or use this product.

Caution

  • Properly torque and recheck fasteners and security of step tread after 250 miles and inspect frequently. Do not use if damaged.
  • Rear Bumper is heavy, and we strongly suggest the assistance of an able-bodied assistant during the lifting and installation of your Rear Bumper.

REQUIRED TOOLSHAWKLEY-NJK01B107-2007-2018-Wrangler-JK4-Door-and-2Door-fig (1)

Parts InformationHAWKLEY-NJK01B107-2007-2018-Wrangler-JK4-Door-and-2Door-fig (2)

Note: spare parts such as W28、W29、N24、B41、B45 are provided with 2PCS each (included in the number of parts details).

Installation Instructions

  • Step 1: Open the carton and take out the parts. Check whether the number of components is complete.
  • Step 2: Clean the rear of the car to ensure it is free of dust, dirt, and debris.
  • Step 3: Take out the vehicle’s original bolts before installationHAWKLEY-NJK01B107-2007-2018-Wrangler-JK4-Door-and-2Door-fig (3)
  • Step 4: Install the Rear BumperHAWKLEY-NJK01B107-2007-2018-Wrangler-JK4-Door-and-2Door-fig (4) HAWKLEY-NJK01B107-2007-2018-Wrangler-JK4-Door-and-2Door-fig (5)
  • NOTICE: Do not tighten the bolts in this step.
  • Step 5: Adjust the balance of the Rear Bumper and the car side and tighten the bolts.
  • Step 6: Install the Tow Trailer Hitch Receiver and tighten the bolts.HAWKLEY-NJK01B107-2007-2018-Wrangler-JK4-Door-and-2Door-fig (6) HAWKLEY-NJK01B107-2007-2018-Wrangler-JK4-Door-and-2Door-fig (7) HAWKLEY-NJK01B107-2007-2018-Wrangler-JK4-Door-and-2Door-fig (8) HAWKLEY-NJK01B107-2007-2018-Wrangler-JK4-Door-and-2Door-fig (9)
  • Step 7: Install the Shackles.HAWKLEY-NJK01B107-2007-2018-Wrangler-JK4-Door-and-2Door-fig (10)
  • Step 8: Connect the bumper brake light wiring.HAWKLEY-NJK01B107-2007-2018-Wrangler-JK4-Door-and-2Door-fig (11) HAWKLEY-NJK01B107-2007-2018-Wrangler-JK4-Door-and-2Door-fig (12)
  • Step 9: Bundling wires.
  • Step 10: Installation of the Rear Bumper is complete. Please do periodic inspections of the Rear Bumper to make sure that all hardware is secure and tight.

Documents / Resources

HAWKLEY NJK01B107 2007 2018 Wrangler JK4 Door and 2Door [pdf] User Guide
NJK01B107 2007 2018 Wrangler JK4 Door and 2Door, NJK01B107, 2007 2018 Wrangler JK4 Door and 2Door, Wrangler JK4 Door and 2Door, JK4 Door and 2Door, Door and 2Door

References

Leave a comment

Your email address will not be published. Required fields are marked *