AAMP P-BUA-PROMASTER Wiring Harness for Backup Alarm 2018-2021 RAM Promaster Instruction Manual

AAMP P-BUA-PROMASTER Wiring Harness for Backup Alarm 2018-2021 RAM Promaster

INTRODUCTION

Wiring Harness for Backup Alarm 2018-2021 RAM Promaster

Thank you for purchasing the P-BUA-PROMASTER 

WHAT’S INCLUDED

• Vehicle Specific Wire Harness (P-BUA-PROMASTER)

COMPATIBLE ACCESSORIES

• 97dB Backup Alarm (BUA-97C)

TOOLS REQUIRED

1. 10mm Nut-setter
2. #2 Phillips Bit
3. Impact Adapter
4. 17mm Socket
5. Impact Drill

HOW TO OPERATE

STEP 1: Remove the (7) #2 Phillips screws from the black plastic trim panel that covers the C-pillar cavity and tail lamp connector

STEP 2:

• Unplug the OEM tail lamp connector
• Remove the (2) 17mm fasteners that hold the tail lamp assembly in place
  

STEP 3:

Plug the OEM tail lamp connector into the male end of the P-BUA-PROMASTER harness

STEP 4:
Use an impact drill and 10mm nut-setter to install a compatible backup alarm behind the tail lamp assembly. The backup alarm should be mounted high, so that it clears the tail lamp assembly when it is re-installed.
Note: (2) 10mm TEK screws are provided with the compatible backup alarm
STEP 5:
Plug the backup alarm connector into the mating connector on the P-BUA-PROMASTER harness

STEP 6:

• Place any excess harness into the C-pillar cavity
• Re-install the tail lamp assembly
• Re-install the black plastic trim panel

STEP 7:
Test the backup alarm

Phone – 866-931-8021 (option 3)
E-Mail – support@aampglobal.com
AAMP Commercial is a Power Brand of AAMP Global
aampcommercial.com

Documents / Resources

AAMP P-BUA-PROMASTER Wiring Harness for Backup Alarm 2018-2021 RAM Promaster [pdf] Instruction Manual P-BUA-PROMASTER Wiring Harness for Backup Alarm 2018-2021 RAM Promaster, P-BUA-PROMASTER, Wiring Harness for Backup Alarm 2018-2021 RAM Promaster, Backup Alarm 2018-2021 RAM Promaster, Alarm 2018-2021 RAM Promaster, RAM Promaster, Promaster

References

• User Manual