HAMPTON BAY KADPK337-JM Kitchen Island End Panel Installation Guide
Kitchen Island End Panel

ASSEMBLY & INSTALLATION INSTRUCTIONS

Kitchen Island End Panel Installation

  1. CUTTING PANEL TO SIZE
    Cutting Panel

    If a reduced depth is required, the panel can be cut to size. Measure and cut ¾” shorter than the desired depth to account for the thickness of the post.
  2. ATTACH LEG
    Leg Installation

    Set the leg into place and temporarily clamp it to the panel. Fasten at the top and bottom with the provided screws. Use finish nails to secure it on the back side.
  3. INSTALLING TO A CABINET
    Cabinet Installation

    Clamp the decorative island panel to the cabinet placing ¼” shims in between as shown. A small piece of toe kick (KATK) works well as a shim. Pre-drill through the cabinet and shims into the panel. Secure using #8 x 1½” screws.
  4. INSTALLING AS A PENINSULA END
    Peninsula End Installation
    1. A cleat is required that will fit under the panel. Fasten the cleat to the floor in the desired location using a fastening method appropriate for your floor type.
    2. Lower the panel over the cleat and fasten in place using appropriate fasteners and adhesive.

We have partnered with BILT™ to provide 3D interactive instructions for this product. Download the free BILT™ app to a mobile device and search “Woodmark”

Bilt App
QR Code
App Store
Google Play

Documents / Resources

HAMPTON BAY KADPK337-JM Kitchen Island End Panel [pdf] Installation Guide
KADPK337-JM, KADPK337-JM Kitchen Island End Panel, Kitchen Island End Panel, Island End Panel, End Panel, Panel

References

Leave a comment

Your email address will not be published. Required fields are marked *