SUPERATV IN-FSP-H-PIO700 Honda Pioneer 700 Full Skid Plate Installation Guide
SUPERATV IN-FSP-H-PIO700 Honda Pioneer 700 Full Skid Plate

INSTALLATION INSTRUCTIONS

Full Skid Plate: for Honda Pioneer™ 700

  • Drill pilot holes before installing self-tapping screws.
  • Keep hardware snug when securing components.
  • Do not discard packaging until product has been successfully installed.
  • Discard any remaining hardware.

Liability Statement

SuperATV’s® products are designed to best fit user’s ATV/UTV under stock conditions. Adding, modifying, or fabricating any factory or aftermarket parts will void any warranty provided by SuperATV® and is not recommended. SuperATV’s® products could interfere with other aftermarket accessories. If user has aftermarket products on machine, contact SuperATV® to verify that they will work together.

Although SuperATV® has thousands of satisfied customers, user should be aware that installing lift kits, long travel, or suspension kits, tires, etc. will change the ride of machine and may increase maintenance and part wear. Operating any off-road machine while, or after, consuming alcohol and/or drugs increases risk of bodily harm or death. No warranty or representation is made as to this product’s ability to protect user from severe injury or death. SuperATV® urges operators and occupants to wear a helmet and appropriate riding gear at all times.

By purchasing and installing SuperATV® products, user agrees that should damages occur, SuperATV® will not be held responsible for loss of time, use, labor fees, replacement parts, or freight charges. SuperATV®, nor any 3rd party, will not be held responsible for any direct, indirect, incidental, special, or consequential damages that result from any product purchased from SuperATV®. The total liability of seller to user for all damages, losses, and causes of action, if any, shall not exceed the total purchase price paid for the product that gave rise to the claim.

SuperATV® will warranty only parts provided by SuperATV®. Any damage or problems with OEM housings, bearings, seals, or other manufacturers’ products will not be covered by SuperATV®. SuperATV® parts and products are not warrantied if item was not installed properly, misused, or modified.

Installing, adding, modifying, or fabricating any factory or aftermarket product to your ATV/UTV may violate certain local, state, and federal laws. Be advised that laws vary depending on town, city, county, state, etc. Use of certain products on public streets, roads, or highways may be in violation law. The Buyer is solely and exclusively legally and personally responsible for any violation of the law by the installation or use of the product. You must abide by all local, state, and federal laws, including but not limited to vehicle safety, traffic laws, and ordinances. It is your responsibility to know the laws and how they apply to you.

The Buyer is responsible to fully understand the capability and limitations of his/her vehicle according to manufacturer specifications, warnings and instructions and agrees to hold SuperATV® harmless from any damage resulting from failure to adhere to such specifications, warnings and/ or instructions. The Buyer is also responsible to obey allapplicable federal, state, and local laws and ordinances when operating his/her vehicle while using this product, and the Buyer agrees to hold SuperATV® harmless from any violation thereof.

Read instructions and view illustrations before beginning.

Parts Description

Item Description
A Front
B Middle
C Rear
D Right
E Left
F Front Bracket x 4
G Rear Bracket x 4
H Rear Splash Plate – L
J Rear Splash Plate – R
K Front Splash Plate – L
L Front Splash Plate – R
M Right Bracket

Vehicle Flip: Super ATV’s recommended installation method; use caution.

  • To prevent scratching Cage, place a rag or other suitable material on Jack Stand.
  • With helpers, slowly flip machine onto its side; have helpers on opposite side to guide machine onto Jack Stand.
    Installation

Hardware Usage:

Holes = Installer must drill pilot hole. Use provided self tapping hardware.
Slots = Stock mounting locations. Use provided threaded hardware.
Hardware Usage

  • Install Front Brackets (F) and Front Splash Plates (K)(L) to Right (D) and Left (E) with hardware shown; do not tighten.
    Hardware Usage
  • Install Rear Brackets (G) and Rear Splash Plates (J)(H) to Right (D) and Left (E) with hardware shown; do not tighten.
  • Install Right Bracket (M) to Rear Splash Plate – R (J) with hardware shown; do not tighten.
    Hardware Usage
  • Install Rear (C) with hardware shown; do not completely tighten.
    Installation
  • Install Middle (B) with hardware shown; do not completely tighten.
  • Install Front (A) with hardware shown; do not completely tighten.
    Installation
  • Install Left (E) with hardware shown; do not completely tighten.
  • Install Right (D) with hardware shown; do not completely tighten.
    Installation
    Installation
  • Align components to each other and tighen all hardware.
  • Install self-tapping hardware into remaining holes; tighten.
    Installation

Need help with your installation?

Emile Icon www.superatv.com
Laptop Icon sales@superatv.com

Phone Icon 1-855-743-3427

Watch Icon 8:00am – 8:00pm EST M-Th
8:00am – 7:00pm EST Friday
9:00am – 2:00pm EST Saturday
Company logo

Documents / Resources

SUPERATV IN-FSP-H-PIO700 Honda Pioneer 700 Full Skid Plate [pdf] Installation Guide
IN-FSP-H-PIO700 Honda Pioneer 700 Full Skid Plate, IN-FSP-H-PIO700, Honda Pioneer 700 Full Skid Plate, Pioneer 700 Full Skid Plate, Full Skid Plate, Skid Plate, Plate

References

Leave a comment

Your email address will not be published. Required fields are marked *