VIVO-LOGO

VIVO DESK-DR15C-B Black Flush Clamp On Desk Drawer

VIVO-DESK-DR15C-B-Black-Flush-Clamp-On-Desk-Drawer-PRODUCT

Product Information

Specifications:

  • Product: Black Flush Clamp-on Desk Drawer
  • SKU: DESK-DR15C-B
  • Weight Capacity: 11lbs (5kg)

Product Usage Instructions

Package Contents:

  • A (x1) Drawer
  • B (x1) Clamp Set
  • C (x2) Threaded Plate
  • D (x2) Spacer
  • E (x2) Pad

Included Hardware & Tools:

  • S-A (x4) M5x8mm Screw
  • Tools Needed: Phillips Screwdriver

Assembly Steps:

  1. STEP 1: Assemble Clamps (B) to Drawer (A) using Threaded Plates (C), Spacers (D), and M5x8mm Screws (S-A).Tighten the screws using a Phillips screwdriver.
  2. STEP 2: Loosen the knobs on Clamps (B).
  3. STEP 3: Loosen the single screws on the front of Clamps (B) using a Phillips screwdriver. Adjust the clamp so that the screw is close to the bottom of the slot.
  4. STEP 4: Place Pads (E) on the desk surface and slide the assembled Drawer onto the desktop. Ensure Pads (E) are below the top of the clamp and tighten the knobs on Clamps (B).

To adjust the resistance of the drawer’s sliding motion, loosen or tighten the M5x8mm Screws (S-A) using a Phillips screwdriver.

FAQ

Q: What is the weight capacity of the Black Flush Clamp-on Desk Drawer?
A: The weight capacity is 11lbs (5kg).

Q: How do I contact customer support for assistance?
A: You can reach our dedicated support team by phone at 309-278-5303, chat with us on our website at www.vivo-us.com, or email us at help@vivo-us.com. Our average resolution times are within office hours: 5 minutes 4 seconds for phone calls, less than 15 minutes for live chat, and within 1 hour 8 minutes for emails.

Assembly Video & Product Info
www.vivo-us.com/products/desk-dr15c-b

CAUTION

If you do not understand these directions, or if you have any doubts about the safety of the installation, please contact our product support team at 309-278-5303 or help@vivo-us.com for further assistance. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or inappropriate use.

WARNING: CHOKING HAZARD
SMALL PARTS – NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.

DO NOT EXCEED WEIGHT CAPACITY
FAILURE TO DO SO MAY RESULT IN SERIOUS INJURY.

We’re Here for You
Open Monday – Friday 7:00am – 7:00pm CST,our dedicated support team can offer immediate assistance with rapid response times. If any parts are received damaged or defective, please contact us. We are happy to replace parts to ensure you have a fully functioning product.

Give us a Call:
309-278-5303

AVG. RESOLUTION TIME (within office hrs): 5M 4S

Chat Us:
www.vivo-us.com
AVG. RESOLUTION TIME (within office hrs): < 15 M

Email Us:
help@vivo-us.com

AVG. RESPONSE TIME (within office hrs): 1HR 8M

  • 23% within < 15m
  • 38% within < 30m
  • 61% within < 1hr
  • 83% within < 2hr
  • 92% within < 3hr

Package Contents

VIVO-DESK-DR15C-B-Black-Flush-Clamp-On-Desk-Drawer-FIG- (1)

Included Hardware & Tools

VIVO-DESK-DR15C-B-Black-Flush-Clamp-On-Desk-Drawer-FIG- (2)

VIVO-DESK-DR15C-B-Black-Flush-Clamp-On-Desk-Drawer-FIG- (3)

ASSEMBLY STEPS

STEP 1
Assemble Clamps (B) to Drawer (A) using Threaded Plates (C), Spacers (D), and M5x8mm Screws (S-A). Tighten the screws using a Phillips screwdriver.

NOTE: The embossed cylinders on Spacers (D) should be installed where they are sitting in the slots of Drawer (A).

VIVO-DESK-DR15C-B-Black-Flush-Clamp-On-Desk-Drawer-FIG- (4)

STEP 2
Loosen the knobs on Clamps (B).

VIVO-DESK-DR15C-B-Black-Flush-Clamp-On-Desk-Drawer-FIG- (5)

STEP 3
Loosen the single screws on the front of Clamps (B) using a Phillips screwdriver. Adjust the clamp so that the screw is close to the bottom of the slot.

VIVO-DESK-DR15C-B-Black-Flush-Clamp-On-Desk-Drawer-FIG- (6)

STEP 4
Place Pads (E) on the desk surface and slide the assembled Drawer onto the desktop. Ensure Pads (E) are below the top of the clamp and tighten the knobs on Clamps (B).

VIVO-DESK-DR15C-B-Black-Flush-Clamp-On-Desk-Drawer-FIG- (7)

To adjust the resistance of the drawers sliding motion. Loosen or tighten the M5x8mm Screws (S-A) using a Phillips screwdriver.

VIVO-DESK-DR15C-B-Black-Flush-Clamp-On-Desk-Drawer-FIG- (8)

Need Help? Get In Touch
Monday-Friday from 7:00am-7:00pm CST

help@vivo-us.com

www.vivo-us.com
Chat live with an agent!

309-278-5303

FOR MORE GREAT VIVO PRODUCTS,
CHECK OUT OUR WEBSITE AT: WWW.VIVO-US.COM

Documents / Resources

VIVO DESK-DR15C-B Black Flush Clamp On Desk Drawer [pdf] Instruction Manual
DESK-DR15C-B Black Flush Clamp On Desk Drawer, DESK-DR15C-B, Black Flush Clamp On Desk Drawer, Flush Clamp On Desk Drawer, Clamp On Desk Drawer, Desk Drawer, Drawer

References

Leave a comment

Your email address will not be published. Required fields are marked *