Battery Tender 022-0227-DL-WH 12V 75A Booster Battery Charger with Wi-Fi User Manual
Installation Instructions
- If you have not installed the ‘Deltran Connected’ app, go to the App Store, search for “Deltran Connected” and download the app.
- If you have the app already downloaded, then go to the App Store and make sure your app is up to date with the latest version.
- Open the Deltran Connected app to get started.
- Log in or Register
- If you have created an account with the Battery Tender® app then you can sign in with the same username and password. Any device that you added to the Battery Tender® app will sync and appear in the ‘Deltran Connected’ app.
- BatteryTender.com website accounts are not tied to the Battery Tender® app or the ‘Deltran Connected’ app. Please create a new account by tapping “New Account”.
- Once you are signed in, either tap on the + in the top right corner or on the center of the screen to begin connecting your Wireless Power Plus 75A Boost Charger.
- Plug in the Wireless Power Plus 75A Boost Charger if it isn’t already. If it is plugged in, unplug it for 10 seconds and plug it back in.
- Tap on “GO TO WI-FI SETTINGS” to start the configuration process.
- If it doesn’t already go to the Wi-Fi settings, tap on the Wi-Fi tab.
- You should see a network name that will look like BT_XXXXXX if it hasn’t already been configured in the Battery Tender app.
- The default password is “12345678” without quotation marks.
- If you are connecting to an already configured device, look for the network name it was configured with before.
- Once you have selected the Wireless Power Plus 75A Boost Charger and you see the checkmark to the left, go back to the Deltran Connected app.
- You have the option to change the Wireless Power Plus 75A Boost Charger’s name in this step.
- Tap on “SETUP WI-FI CONNECTION” to pair the Wireless Power Plus 75A Boost Charger to your router.
- If your wireless network wasn’t already selected, tap on “SELECT ANOTHER NETWORK” at the bottom of the page.
- Select a 2.4GHz network that the Wireless Power Plus 75A Boost Charger will connect to.
- Even if you see a 5GHz network signal, the Charger will not connect. A 2.4GHz network is required.
- You will not be able to connect to a dual band router that has the same SSID (network name) for 2.4 and 5 GHz.
- In this situation, the 5Ghz band must be disabled temporarily until set-up is complete.
- Connection strength will vary depending on the distance to your router and any obstructions through the path to the Wireless Power Plus 75A Boost Charger’s location.
- If your wireless network wasn’t already selected, tap on “SELECT ANOTHER NETWORK” at the bottom of the page.
- Now create or select an existing location for where the Wireless Power Plus 75A Boost Charger will be used.
- You should now see the Battery tender on the dashboard screen. This is to indicate a successful connection to the selected wireless network in the prior step.
- Very rarely will the device fail to pair but hit cancel and wait one hour and you should see the status of your battery.
- To remove the device, tap the three dots in the top-right corner of the Deltran Connected app and then tap.”
- Repeat steps 5 – 15.
- You should now see your Wireless Power Plus 75A Boost Charger on your Dashboard screen.
Documents / Resources
Battery Tender 022-0227-DL-WH 12V 75A Booster Battery Charger with Wi-Fi [pdf] User Manual 022-0227-DL-WH, 12V 75A Booster Battery Charger with Wi-Fi |