One For All URC1810 Samsung TV Replacement Remote
REMOTE CONTROL
- POWER
Power Key - HDMI
Direct access to your attached HDMI Devices - SOURCE
AV Input - CH LIST
Channel List - LAST
Previous Channel - CC
Closed Captions - SMART HUB
Smart Hub - TOOLS
Tools, Options - RETURN
Return, Back - S. MODE
Sound Mode - P. MODE
Picture Mode - DUAL
I- II - P. SIZE
Picture Size - ANT
Antenna
BATTERIES
PRODUCT USAGE
STEP 1: SET UP YOUR TELEVISION
THE MAJORITY OF NEWER SAMSUNGS TVS SHOULD WORK DIRECTLY.
After putting batteries in, just test some of the keys, and if they work, your remote is ready. If not, follow the next steps:
- Make sure your TV is on (not on standby). Hold down RED + BLUE until the LED behind the Power Key blinks twice
- Point towards the TV and hold down the POWER KEY until the TV turns off . The remote will send a different Power signal every 3 seconds As soon as the TV turns off, let go of the POWER KEY. The LED will blink twice. Now test the rest of the keys on the remote, if they work as your original did, your remote is ready to use.
If you find some keys still do not work as expected (or at all), proceed to the next step.
STEP 2: IF STEP 1 DOES NOT WORK AS EXPECTED
ARE SOME KEYS NOT WORKING AS EXPECTED?
If you find some keys do not work as expected (or at all), proceed to the next step.
- Make sure your TV is on (not on standby). Hold down RED + BLUE until the LED behind the Power, Key blinks twice
- Point towards the TV and hold one of the keys that are not working correctly (for example MENU). The remote will send a signal every 3 seconds. When the correct function is shown on the screen (in this case the MENU), let go of the key. The LED will blink twice – your remote is ready to use
FUNCTIONS
START: LEARN A NEW FUNCTION FOR YOUR REMOTE
Your One For All remote can learn any function from your original (working) remote.
- Place the original remote facing the One For All remote on a flat surface.
- To learn: Hold down GREEN + YELLOW until the LED blinks twice
- Press 975 The LED will blink twice.
- Press the key on the One For All remote you want to learn on, for example, the VOL + key
- Press the key on the Original remote you want to learn, for example, the VOL + key of your AUDIO Device
- Two blinks: ok. Repeat step 4 for any more keys to learn.
Long blink: try again from step 4.
- When you have learned all the keys you need, press and hold the OK KEY for 3 seconds. The LED will blink twice
HOW TO DELETE A LEARNED FUNCTION
- Hold down GREEN + YELLOW until the LED blinks twice.
- PRESS 976.
- Press the key to reset twice.
The LED flashes twice and the key will get back the original function
WARRANTY / GUARANTEE INFORMATION
Terms and Conditions for the “100% Guaranteed To Work” policy, and the seperate 1 Year Limited Warranty against defects in material and workmanship can be found at www.oneforall.com/remoteguarantee, or you may request hard copies by calling 855-716-2573, or via mail to UEI Technical Support Service, Suite 301, 26250 Euclid Ave., Euclid, OH 44132. Please include your full name, product information, and contact information in your request communication.
LEGAL NOTICES
FCC STATEMENT:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Customer Support: 855-716-2573 (toll free) OFA warranty/terms & conditions: 855-569-6595 (toll free) www.oneforall.com
Imported into the US by Universal Electronics Inc. UEI Technical Support Services, Suite 301 26250 Euclid Ave. Euclid, OH 44132
One For All is a registered trademark of UEI Made in China, Hecho en China
FREQUENTLY ASKED QUESTIONS
What is the One For All URC1810 Samsung TV Replacement Remote?
The One For All URC1810 is a universal remote control designed specifically as a replacement for Samsung TVs.
What is the purpose of the URC1810 remote?
The URC1810 remote is designed to control various functions of a Samsung TV, such as power, volume, channel selection, and menu navigation.
Is the URC1810 compatible with all Samsung TV models?
The URC1810 remote is designed to be compatible with a wide range of Samsung TV models, but it's always recommended to check the compatibility list provided by the manufacturer.
Does the URC1810 require programming?
Yes, the URC1810 remote needs to be programmed to work with your specific Samsung TV. The programming process typically involves entering specific codes or using a code search function.
Can the URC1810 control other devices besides Samsung TVs?
The URC1810 is primarily designed for Samsung TVs, but it may have limited compatibility with other audio/video devices. It's best to consult the product documentation or manufacturer for specific details.
Does the URC1810 support all TV functions?
The URC1810 remote is designed to replicate the basic functions of the original Samsung TV remote, including power, volume, channel selection, and menu navigation. Advanced functions may not be supported.
Does the URC1810 require line-of-sight to operate?
Yes, the URC1810 remote generally requires line-of-sight with the Samsung TV's infrared receiver for proper operation.
Can the URC1810 control multiple Samsung TVs?
Yes, the URC1810 remote can be programmed to control multiple Samsung TVs if needed.
Does the URC1810 have a backlight for use in low-light conditions?
No, the URC1810 remote does not typically have a backlight feature.
Is the URC1810 powered by batteries?
Yes, the URC1810 remote is powered by batteries. The specific battery type and quantity required may vary. Usually, AA or AAA batteries are used.
Can the URC1810 learn commands from the original Samsung remote?
The URC1810 remote does not typically have learning capabilities. It relies on pre-programmed codes or a code search function to control the Samsung TV.
Does the URC1810 have a numeric keypad for direct channel entry?
Yes, the URC1810 remote usually has a numeric keypad to allow direct channel entry on the Samsung TV.
Can the URC1810 control the TV's input/source selection?
Yes, the URC1810 remote typically has buttons to control the TV's input/source selection, allowing you to switch between different connected devices.
Does the URC1810 have a dedicated button for accessing the TV's menu?
Yes, the URC1810 remote usually has a button to access the TV's menu, allowing you to navigate and adjust settings.
Does the URC1810 come with a user manual?
Yes, the URC1810 remote typically comes with a user manual that provides instructions on programming, setup, and usage.
DOWNLOAD THE PDF LINK: One For All URC1810 Samsung TV Replacement Remote User Manual
