Aesfee AF-8077 7D Electric Rotary Shaver User Manual

Aesfee AF-8077 7D Electric Rotary Shaver

IMPORTANT SAFETY INSTRUCTIONS

Please read the following instructions before using your new Aesfee electric shaver, especially close supervision is necessary when this shaver is used by children or invalids.
Give it the care that a fine precision-build instrument deserves, and it will give you years of service.

DANGER
To reduce the risk of electric shock

1. ALWAYS unplug this shaver from the electrical outlet immediately after using(expect when charging the shaver).
2. Do not reach for a shaver that has fallen into the water while plugging, unplug immediately.
3. Unplug this shaver before cleaning, removing, or assembling parts.

WARNING
To reduce the risk of burns, fire, or injury to persons:

1. Never leave a plugged-in shaver unattended.
2. This shaver is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities or lack of experience and knowledge unless they are under the supervision or instruction concerning the use of the shaver by a person responsible for their safety. Children should be supervised to ensure that they do not play with the shaver.
3. Use this shaver only for its intended use as described in this manual. DO NOT use the attachments not recommended by Aesfee.
4. DO NOT pull, twist or wrap the cable around the shaver. Keep the cable away from heated surfaces.
5. Never drop or insert any object into any opening on the shaver.
6. DO NOT use this shaver with a damaged or broken head or cutter, as injury to the skin may occur.
7. Always attach a plug to the shaver first, then to the outlet, To disconnect, turn all controls to OFF, then remove the plug from the outlet.
8. DO NOT crush or heat over 212 “F (100 ‘C) or incinerate the shaver due to the risk of fire, explosion, or burns.

What’s in the package?

• 1 x Electric shaver
• 1 x Type-C charging cable
• 1 x Cleaning brush
• 1 x User manual

Specifications

• Product name: Electric shaver
• Model No.: AF-8077
• Input: DC 5V 1 A Type-C
• Lithium battery capacity: 800mA
• Charging time: 1.5 Hour
• Runing time: 90 Minutes
  WARNING
  Changes or modification to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC rules.Operation is subject to the following two conditions: (1) This device may not cause harmful interface, and (2) this device must accept any interference received, including interference that may cause undesired operation.

BASIC INSTRUCTIONS FOR USE

Charging
The bottom of the LED display shows the battery level:

1. Red and flashes, LED display shows empty: Power Exhausted
2. Red and flashes, LED display shows lower than “10%”: Low Battery
3. Light on, battery level flashes: Charging
4. LED display shows “100%”, the shaver is Fully Charged.

The shaver is charged through the Type-C interface, You can use the DC 5V mobile phone charger, car charger, or a USB interface of computer/laptop for charging.
NOTE: If the charging cable is damaged, replace it with a new one to avoid danger.

1. When the LED display shows lower than 10%, theindicator light will flash, indicating that the battery is running low and needs to recharge .
2. Connect the shaver to the wall charger or other DC 5V USB ports with the included USB Type-C cable to charge.
3. The LED display will light up, with scrolling numbers which will increase as the charging time extends, indicating that it’s charging.
4. Full charging takes about 1.5 hour on a continuous basis. “100%” will be displayed indicating the shaver has beenfull charged and can be used for about 100 minutes .

Failure to Charge?

1. Make sure voltage is present at the USB port ( confirm with an appliance you know is working).
2. Make sure the USB Type-C cable is working ( confirm with an appliance you know is working).
3. Checking to make sure the USB Type-C cable is plugged firmly into the shaver, Twist the Type-C cable connector slightly to ensure a good electrical connection. If failure to charge still exists while the shaver is under warranty please contact Aesfee customer support for examination and/or replacement.

Use the Shaver
This professional shaver supports two speeds (7000/7500RPM) to meet different needs.

1. Press the On/Off button to turn on the shaver. If you want to switch to another speed, please press the button again within 5 seconds of turning on the shaver. Pressing the button for the third time will turn off the shaver. If the button is pressed again after turning on the shaver for more than 5 seconds, it will turn off the shaver.
2. Move the shaver head against the growth direction of your beard or hair on your skin and make straight and reciprocated movements.
   Hair on your neck can also be shaved.
3. Before shaving head, wash the hair with warm water and keep it dry.
4. Clean the shaver and cover the shaver head protection cover after use to avoid damage to the shaver head.
   Please DO NOT use any damaged shaving head to avoid injury to your skin; instead, repalce it immediately with Aesfee original spare shaving head which can be bought where you buy your shaver.
   Note:
   1. The head shaver is intended to maintain a shaved look, please do not attempt to shave head hair that is longer than 2.0mm.
   2. The shaver can be used dry shaving or with shaving cream or gel in the shower.
   3. Choose a higher speed to avoid hair tugging and enhance shaving efficiency.
   4. Do not press the shaver head too hard on the skin to avoid irritation.

USER MAINTENANCE INSTRYCTIONS

If the shaver is to remain unused for a long period of time, store it in a safe, cool, and dry place. DO NOT hang the shaver by the charging cable.
Important: For best shaver performance and results, it is recommended that you replace your shaver head assembly every six months. Please pay attention to the following items when maintaining the shaver

1. DO NOT remove the shaver head assembly while the shaver is switched on. ALWAYS switch the shaver off.
2. Do not touch the shaver head with hard objects as this can cause irreparable damage to the shaver or parts, leading to skin damage.
3. When cleaning, do not use any abrasive or sharp objects. They can cause irreparable damage to the shaver or parts, leading to skin damage.

Cleaning
Clean your shaver with the included cleaning brush after each use, or rinse the heads under the tap for optimal shaving performance

1. Always disconnect the shaver from the USB cable and switch off the shaver before cleaning.
2. The shaver head is designed with a magnetic suction for easy removal and cleaning. Pull the blade assembly outward to remove it.
3. The shaver can be washed directly under running tap. but please do not soak it in water for a long time.
4. After washing, drain any excessive water, put it horizontally and air-dry it. do not wipe the shaving head part with tissue or cloth, which may cause damage.
5. First air-dry the shaver, then cover it with the protective cover to prevent damage to the head and avoid accumulation of dust.

Replace Shaver Head
The shaving head should be replaced at least once every six months for a good experience, if there is no damaged caused by human factors, the shaver can have a long service life. Any damaged shaving head can only be replaced with Aesfee original double-ring 7 blades shaving head. The detachable shaver head assembly is very convenient for replacement. Gently pull up the entire shaver head assembly to remove it, and then align the new shaver head assembly with the fuselage slot and press down to complete the installation. After replacement, first open the switch to confirm whether the shaver head assembly is reliably installed and then use it.

ENVIRONMENTAL PROTECTION

1. To discard the product, please don’t put it together with general domestic rubbish heaps but hand it to the officially designated recycle center for the environmental protection.
2. The build-in rechargeable battery contains substances which may pollute the environment, so it must be unloaded from the product or sent to the officially designated recycle center to be disposed before it is discarded.

The battery should not be unloaded unless it has been used up.

1. Unplug the charger and also pull out the USB C cable from the shaver.
2. Unload the battery.
   Do not plug in the shaver again after unloading the battery.

WARRANTY & CUSTOMER SUPPORT

• 15 months warranty and lifetime technical support from the date of order.
• For questions, assistance, technical support, or warranty claims please contact us at the below email address, please  include your Amazon order ID, region and product modelname.

ABOUT COMPANY

• Aeslee International Limited
• Add: 1104, Block A, Zhongguan Times Square, No. 4168
• Liuxian Avenue, Nanshan District
• Shenzhen 518055, China
• Website: www.aesfee.com
• E-mail: support@aesfee.com
• EU Representative
  • Qing UG (hattungsbeschriinkt)
  • Undinestr. 7, 12203 Berlin, Germany
• UK Representative
  • JunBright Lid
  • Chalton Street, London, NW1 1 HY England

Documents / Resources

Aesfee AF-8077 7D Electric Rotary Shaver [pdf] User Manual AF-8077 7D Electric Rotary Shaver, AF-8077, 7D Electric Rotary Shaver, Electric Rotary Shaver, Rotary Shaver, Shaver

References

• User Manual