DREAM HORSE TOYS FACTORY BM21 Two Channel Water Land Air Glider
Product Usage Instructions
1. Installation:
Follow the steps in the manual to properly assemble and install the product. Make sure to connect all necessary components securely.
2. Powering on the Device:
Plug in the power source and press the power button to turn on the device. Wait for the device to boot up completely before use.
3. Operating the Product:
Refer to the user manual for specific instructions on how to operate the product efficiently. Familiarize yourself with all the features and functions.
4. Maintenance and Care:
Regularly clean the product using a damp cloth. Avoid using harsh chemicals that may damage the material. Follow maintenance guidelines to ensure product longevity.
Frequently Asked Questions
- Q: How do I troubleshoot if the device does not power on?
- A: Check the power source connection and ensure it is plugged in correctly. If the issue persists, contact customer support for further assistance.
- Q: Can I disassemble the product for cleaning?
- A: Refer to the user manual for disassembly instructions. Only disassemble the product as recommended to avoid damage.
Product Usage Instructions
Beginner flight adjustment and notice
After the aircraft takes off, please control the throttle altitude to make the aircraft fly at a constant speed, and do not accelerate suddenly.
Direction operation practice
When the model aircraft is off the ground, use the direction joystick to control ground taxiing direction or change the flight route.
WARNING
When the aircraft power is weak while flying, it means that battery is almost out of power. It is recommended that the operator needs to land it as soon as possible. In order to avoid the aircraft can not fly back without power, or fly lost.
Product Size
Troubleshooting during flight
| situation | reason | Solution | |
| After the aircraft is powered on, the indicator light continues to flash, but there is no response to the operation. | Failed to connect the remote control and receiver. | Please re-execute the connection action between the remote control and the receiver board | |
|
2 |
The aircraft did not respond after connecting the battery of the model aircraft. | 1. Check whether the remote control and
receiver are connected to the power 2. Check the voltage of the remote control and the receiver battery 3. Poor contact of battery pole pieces |
1. Turn on the remote control and ensure the aircraft/receiver battery is inserted properly.
2. Use a fully charged battery 3. Reinsert the battery and confirm whether the contact between the battery and the battery pole piece is normal |
|
3 |
When pushing the throttle stck, the motor does not rotate and the
receiver indicator light starts to flash. |
Aircraft battery is insufficient |
Fully charge the battery |
| 4 | Motor does not turn |
1. When starting up, the throttle lever is not at its lowest po nt
2. Motor oonnector loose or motor damaged 3. The propeller is entangled in debris |
1. After pushing the throttle lever to the lowest po nt, restart the throttle
2. Insert the oonnector into position 3. Check the propeller |
| 5
G |
The main rotor of the model aircraft continues to rotate but cannot take off. | 1. Deformation of the main rotor
2. The aircraft battery is low |
1. Replace the rotor
2. Fully charge the battery |
|
7 |
The aircraft vibrates abnormally. | 1. The rotor is deformed
2. The motor shaft is bent |
1. Replace the rotor
2. Replace the motor |
|
Aircraft unresponsive |
1. The battery level of the lithium battery is too low | 1. Charging | |
| 1. Loose contact between the board plug and the lithium battery | 1. Reoonnect the battery | ||
| 8 | No response to the oontroller | 1. The aircraft and remote control have not completed frequency alignment | 1. Follow the operating steps to re align the frequency |
|
9 |
Unoontrolled flight of aircraft |
1. The aircraft exceeds the remote control distance | 1. Ensure that the aircraft flies within a controllable range |
| 1. The remote control battery is low | 1. Replace the remote control battery with
a new one |
||
| 10 | Aircraft flying to the left | 1. Aircraft deformation | 1. Click on the right trim button |
| 1. Left wing deformation | 1. Adjust the left wing | ||
| 11 | Aircraft flying to the right | 1. Aircraft deformation | 1. Click on the left fine-tuning button |
| 1. Right wing deformation | 1. Adjust the right wing | ||
| 12 | When turning, the flight altitude
drops sharply |
1. Excessive steering angle | 1. Reduce the steer ng amplitude or use the touch method for steering |
The throttle is equivalent to the elevator function of an aircraft. If you are not familiar with flight performance, you can use one-third or halt of the throttle. Novice takeoffs can easily use full throttle at once, which can cause a flip and cause the aircraft to explode. wuse the ailiat to spiral of there omened conting herationing to ust a totaller uring angele asth, oril use jog to control the direction, so that it is not easy to spiral off. So that he arcafts a sier to conto ty in open areas, such as in calm or breezy conditions, The process of landing on the water surface should be as smooth as possible, and the throttle should be slowly retracted to avoid sudden fuel retraction. This way, the aircraft will hit the water surface and sometimes it will buckle down in the water. During takeoff from the water surface, a large throttle should be used, and the throttle can be appropriately reduced after the aircraft leaves the water surface. alerats cender of graviry, if using your own battery, needs to be close to the weightand veltage of thents of the standard battery. This aircraft is a sea, land, and air amphibious aircraft. When choosing to fly on the water surface, it is necessary to be with adults who can swim. It is prohibited to dive into the water to pick up the aircraft after it falls into the water to avoid drowning accidents. Prohibit use in radio controlled areas, such as airports and military bases.
Instructions for Sticker Placement
FCC Statement
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Documents / Resources
 |
DREAM HORSE TOYS FACTORY BM21 Two Channel Water Land Air Glider [pdf] Instruction Manual BM21 Two Channel Water Land Air Glider, BM21, Two Channel Water Land Air Glider, Water Land Air Glider, Land Air Glider, Air Glider, Glider |
 |
DREAM HORSE TOYS FACTORY BM21 Two Channel Water Land Air Glider [pdf] User Manual BM21 Two Channel Water Land Air Glider, BM21, Two Channel Water Land Air Glider, Water Land Air Glider, Land Air Glider, Air Glider, Glider |
