GERMAN-logoGERMAN High Performance Commercial Blenders

GERMAN-High-Performance-Commercial-Blenders-product (2)

 

Product Information

Part Name Quantity
Stir Rod 1
Small cup 2
Cup cover 1
Cup 1
Knife Assembled 1
Body 1
On/Off Switch 1
Pulse Switch 1
Speed adjustor 1

Professional Blender Use and Care manual

Please read carefully about this Instruction manual before operating the machine. Please keep this manual for future reference. Illustrations are for instruction purpose only, and may be different from the actual product

Part name

1 Stir Rod
2 Small cup
3 Cup cover
4 Cup
5 Knife Assembled
6 Body
7 On/Off Switch
8 Pulse Switch
9 Speed adjustor

GERMAN-High-Performance-Commercial-Blenders-fig

Product Feature

  • One machine with multi-function. Used 2 in 1 knife assembled, can Make smoothie, juice, soybean milk, no need to change knife or cup
  • Used hardness Stainless steel knife
  • Industrial high speed motor, big power, high efficiency. Use pure copper wire for motor
  • Protection system, safety switch, over current protection
  • Use food grade transparent Polycarbonate for cup, not easy broken, high temperature endurance
  • Use import bearing and grease seal, good sealing and not leakage, long life of the product\

Safety instruction

  • Switch off the appliance and disconnect from supply before changing accessories or approaching parts that move in use.
  • Care shall be taken when handling the sharp cutting blades, emptying cup during cleaning
  • Always disconnect the appliance from the supply if it is left unattended and before assembling, disassembling or cleaning
  • This appliance shall not be used by children. Keep the appliance and its cord out of reach of children
  • Appliances can be used by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and if they understand the hazards involved. Children shall not play with the appliance.

Pls use 10AMP or above socket for the machine, do not use same socket with other appliance, to avoid overheat to caused fire

GERMAN-High-Performance-Commercial-Blenders-fig (2)

Pls do not touch any movable part During machine operating, especially the knife assembled. Please be careful when cleaning/replacing the knife inside.GERMAN-High-Performance-Commercial-Blenders-fig (3)

Pls do not washed the machine with water directly, this will caused short circuit

GERMAN-High-Performance-Commercial-Blenders-fig (4)

Pls do not use the machine near the fire or high temperature place

GERMAN-High-Performance-Commercial-Blenders-fig (1)

It is not allow to operate the Mach–fine without any material such as water, ice or fruit, this will caused the knife assembled broken, and shorten the machine life.

GERMAN-High-Performance-Commercial-Blenders-fig (6)

It is not allow to disassembled the machine body, and please do not use sharp material to touch the polycarbonate cup to avoid broken the cup. Otherwise, liquid go into the machine and caused the machine broken.

GERMAN-High-Performance-Commercial-Blenders-fig (7)

Please do not let the old, children and disable man to operate this machine.

GERMAN-High-Performance-Commercial-Blenders-fig (8)

Please do not put the machine on soft surface such as carpeting and table cloth when operating, to.

GERMAN-High-Performance-Commercial-Blenders-fig (5)

  • id blocking the air in and out.
  • curation
  • Must know safety note
  • This product belong to Class1appli
  • acne, please use well earth conn
  • etc. plug during operation

GERMAN-High-Performance-Commercial-Blenders-fig (10)

Pls make sure the machine is on “off” status before you place the cup on the body of the machine. Pls wait till the motor completely stop before to take the cup

GERMAN-High-Performance-Commercial-Blenders-fig (11)

  • Correct operation safety note

Pls do not let other material go into the machine, especially the bugs, otherwise the machine will broken down. Pls keep the machine in dry and clean condition. Pls dry and packed the machine if long time not use.

GERMAN-High-Performance-Commercial-Blenders-fig (12)

Pls do not over maximum level line when put the material into the cup, make sure the cup cover is tightly closed.

GERMAN-High-Performance-Commercial-Blenders-fig (9)

Before you start the machine, Pls Make sure the cup gasket is tightly Fit on the body, and then the cup is Completely placed on the cup gas–ket finally make sure the small cup Is cover tightly. Pls do not open the cover during operation.

GERMAN-High-Performance-Commercial-Blenders-fig (14)

Before you start the machine, Pls Make sure the cup gasket is tightly Fit on the body, and then the cup is Completely placed on the cup gas–ket finally make sure the small cup Is cover tightly. Pls do not open the cover during operation

GERMAN-High-Performance-Commercial-Blenders-fig (15)

Pls keep 20CM distance when us–ing the machine. If the material in the cup is liquid, please turn the speed control to the lowest speed then to highest speed otherwise the liquid will have possible to spill out.

GERMAN-High-Performance-Commercial-Blenders-fig (16)

Pls unplug after use, and wire up the power cord accordingly

GERMAN-High-Performance-Commercial-Blenders-fig (13)

Please do not put liquid, such as water on the bearing on the bottom of cup, otherwise will caused rust, affect the function of the machine and shorten the life of the product.

GERMAN-High-Performance-Commercial-Blenders-fig (18)

This product have over current Protection When the material in cup is too much or block, it will be caused the machine stop. In this case, please unplug, and check the over current switch is cut off or not, if it is ,turn it on and then the machine can start again.

GERMAN-High-Performance-Commercial-Blenders-fig (19)

If the power cord broken, please do not use the machine again, and send it to service center to replace good power cord. Please do not replace by yourself.

GERMAN-High-Performance-Commercial-Blenders-fig (20)

When operate this machine, Pls keep 20CM gap for every side, and clear the table, do not let any–thing to block the air inlet and outlet.

GERMAN-High-Performance-Commercial-Blenders-fig (17)

Operation instruction

  • Control Instruction

On/off Switch We pre-setting “off”, turn to “On”, machine start to work, turn to “Off”, machine stop working
Pulse switch We pre-setting “off”. Turn to “On”, the machine will work at full power, loose the switch, machine will auto stop working and turn to “Off” status
Steeples speed adjust: We pre-setting on “Min”, the machine will Work slowly, on “Max” the machine will work at full power. from “Min” to “Max”, the speed will be bigger step by step

Operation Procedure

preparation

  1. Make sure the working voltage is between 220-240V 50/60Hz
  2. Ensure the machine switch is on “off” status
  3. Put the product on table, plug into the socket
  4.  Clean well the cup, cup cover, small cup, stir rod and prepare food mat for blending put the material into the cup
  1. Put the material into the cup, normally the order is soft material first , and then hard one, last is liquid. Do not add material over the Maximum level, otherwise will caused spill out. Some fruits, if it is ok to cut, please cut to 3CM peace, this will help the blending efficiency and result. For example, make a simple smoothie. Concentrated Fruit Juice 80g/Smash ice powder 25g/Water 100g/Ice cake 300g
  2. Close the cup cover, and turn the small cup on the top of cup cover. If you need to use the stir rod during the operation, please open the small cup, insert the stir rod through the top hold on the cup cover
  3. Fix the cup correctly on the body of the machine start to blending process
  1. Please keep around 20CM safety distance between the machine and operator
  2. On/Off: Turn on the machine, it will start slowly. Please adjust the speed and time base on different material
  3. Pulse Switch: Turn this switch to “on” status, the machine will working by full power, the other function can not be used at this moment. Loose the Pulse switch, the switch will auto go to “Off” status. Can be use repeated if it is required. This function is use base on necessary
  4. After operation, please turn all the buttons as pre-setting. Take the cup down when the machine is completely stop, open the cup cover to take the blending food

Time control

This machine fitted with big power motor, high speed and efficiency. Normal material can be blending well in 45S. If needed, can extend to 2 Minutes.

Add material during operating (can not over the Maximum level)
please stop the machine, if you want to add much material or the blending is hot drinks, Even just a small quantity, please open the small cup on the top to add
Please use another hand to hold the cup cover when take the cup, to avoid the cup cover loosing or cup shaking Use stir rod correctly
When the material is not easy to move or machine blocked, please use “Pulse” function to blending 2-3 times, in this case, please use stir rod to mix the material

finished the operation

Pls unplug the machine after operation. As the machine is high, keep the cup and body separated stored, to avoid machine falling down.

Operation Skill

  1. Pls turn the speed in lowest speed when processing the liquid material, otherwise will be caused liquid spill out. When the blending become stable, you can turn to the reasonable speed
  2. When the material in cup blocked, pls use “Pulse” function or Stir rod to mix the material
  3. When blending the material can easy have bubbles, such as Tea, pls use“Pulse” function or slow speed. You can choose the frequency of “Pulse” and time depends on the necessary
  4. Pls fill with reasonable water when preparing smoothie and juice

Maintenance of product

  1. Pls unplug before you clean the machine
  2. Pls clean the product and accessory after every use
  3. Pls clean the machine with wet cloth, just can use litmus less towed cloth.
  4. Pls clean the cup and cover in time after use. The cup can dry by stand upside down, and cup cover can hang dry
  5. After some use, some material will stick on the knife, this will affect the

clean and life of the knife assembled. We recommend to disassemble and clean the knife assembled after sometimes, it depends on the frequency, if commercial use, better 1 month 1 time. If long time not to use, Pls disassembled and clean the knife set. During the cleaning, Pls keep the water away from the bearing of knife set, otherwise will be caused rust and shorten the machine life.

  • Pls make sure the machine is clean and dry when stored a long time
  • Pls notice dust and bugs prevention

Trouble shooting

Status Reason Settle method
No working No plug in Plug into the socket tightly
The over current switch is cut off Switch off the appliance, urn the switch is on
Big Shaking The machine not stable horizontal sit Sit the machine in stable horizontal
The cup not fix well Stop the machine to fix well the cup to the body
Too much material Stop the machine to adjust reasonable material
Spill out Material over the maximum level Stop the machine to adjust reasonable level
Not tighten the cup cover Tighten the cup cover and small cup

If the product can not work correctly, not caused by above reason, please do not fix by yourself. Please send it to the Service center for repairing

Packing list

Main body Cup set Stir rod I/M Guarantee card
1PC 1PC 1PC 1PC PC

Documents / Resources

GERMAN High Performance Commercial Blenders [pdf] User Manual
High Performance Commercial Blenders, High, Performance Commercial Blenders, Commercial Blenders, Blenders

References

Leave a comment

Your email address will not be published. Required fields are marked *