AUDIOropa A-5260-0 xepton NX RX Tour User Guide

General information

 Introduction

Thank you very much for choosing »xepton-NX«! You have opted for a modern and reliable com- munication system. Please read this manual ca- refully to familiarise yourself with all the features this system offers.
»xepton-NX« is an ideal system for application within groups – ranging from simple dialogue to interpreter-, team-teaching- and conference sys- tems.
Slim and light-weight in design, it combines qua- lity and versatility with easy use and state-of-the- art radio technology.

  • Scope of delivery xepton-NX RXPlease check if all of the following components are included:
  • xepton-NX RX
  • In-Ear earphones ER-01
  • belt clip BC-01
  • USB-charger
  • neck strap
  • user manual
  • warranty card

Should any parts be missing, please contact your dealer or the manufacturer directly.

Main Features

  • 863-865 MHz transmission
  • Transmission range of up to 80 m
  • Digital transmission
  • Encryptable transmission
  • Up to 10 hours of use per battery charge
  • Convenient charging by Micro-USB or via charging stations and -cases
1.4 Available accessories  
– xepton rechargeable battery A-5260-0
– USB power supply unit A-5262-0
– ER-01 In-ear earphones A-5280-0
– EHE-01 one-sided earphone A-5281-0
– Inductive neckloop A-4927-0
– AM-01 arm strap holder A-5292-0

Further accessories are available. Please also re- fer to page 20, part 3 »Power supply / recharge«

Xepton-NX RX Receiver

Controls and displays

How to use

Power ON / OFF

Slide the ON/OFF switch upwards to switch the device on. The LC-display will light up and the currently selected channel number is shown.
To switch the device off after use: Slide the ON/ OFF switch back to the lower position.

Reception

Reception will start as soon as the device is swit- ched on. The symbol  indicates the incoming signal strength.

Volume up / down

The volume can be adjusted through 6 levels from muted to maximum. On the powered-up de- vice, press the »▲« and »▼« buttons to adjust the volume as desired.

Audio outputs »EAR1« and »EAR2«

The earphones ER-01 (included) can be plugged into any of the outputs »EAR1« or »EAR2«.
The 3,5 mm audio jack makes it possible to connect various audio reproduction equipment, such as earphones, headphones, neckloops but also audio amplifiers and more.
A simultaneous use of both outputs is possible but the volume cannot be adjusted separately.

Channel selection

Switch the device on and press the MODE-button for 3 seconds.
The symbol »CH« in the display will blink. Select a channel of 0-7 by pressing the »▲« and »▼« buttons. After the selection, wait for 3 seconds to set the selected channel number.

Please note:

Transmitters and receivers must be set to the same group number if they are to communicate with each other.

Audio output high / low

Apart from the volume control, it is possible to ad- just the basic audio output level. A higher audio output will raise the maximum volume – this might be required in noisy surroundings.
On the powered-up device, press and hold the MODE-button for 3 seconds. The symbol »CH« in the display will blink.
Press the MODE button one time. The »UH« symbol is shown in the display. By using the »▲« and »▼« buttons, select UH (high output) or UL (normal output). After the selection, wait for 3 se- conds to set the selected output level.

Please note:

Selecting »UH« can cause white noise and should only be used in loud environments.
We recommend the default setting »UL«.

1.               Power supply / recharge

The device has a rechargeable lithium-ion bat- tery of 3,7 V / 1100 mAh. There are two possibili- ties for recharging the battery:

  1. To charge the battery, plug the USB charging cable into the USB jack of the RX and connect it to a regular USB port (computer, laptop, USB power supply, power bank).

The following charger cases charge via USB ca- bles:

  • MCB-10 10bay charger case (USB) A-5252-0
  • CB-20 20bay charger case (USB) A-5251-0
  1. Place the RX in one of the charging docks of the following chargers (drop-in charging):
  • CS-2 2bay charging station  A-5257-0
  • CS-20 20bay charging station  A-5256-0
  • DC-20 20bay charger case A-5253-0
  • DC-40 40bay charger case A-5254-0

The charging status LED is illuminated during recharge. The LED switches off when the bat- tery is fully loaded.

Encryption

If the use of Xepton-NX requires discretion, such as in court buildings or during private sessions, the communication between transmitter and receiver can be encrypted. Other Xepton-NX de- vices can then no longer participate in the com- munication.
For this purpose, basic settings on the involved devices must be changed – please contact your authorized AUDIOropa dealer.

Specifications xepton-NX RX

Device type:             Receiver
Dimensions:             85 x 50 x 15 mm (H x W x D)
Weight:                  66 g
Frequency:               863-865 MHz Frequency response: 100 Hz – 14 kHZ Latency:         < 50 ms
Power:                   LI-ION 3,7 V / 1100 mAh
Listening time:           10 hours typical Specifications subject to change.

Conformity

This device satisfies the following EU directives:

  • 2011/65/EC RoHS directive
  • 2014/53/EC RED directive
  • 2002/96/EC WEEE directive

Compliance with the directives listed above is confirmed by the CE seal on the device.
The complete CE compliance declaration is avai- lable on the internet at www.humantechnik.com.

 Maintenance and care

All »xepton-NX«-devices do not require any maintenance. If they become dirty, simply wipe them clean with a soft, damp cloth.
Never use spirits, thinners or other organic sol- vents. Do not expose them to full sunlight.
In addition, they must be protected against exces- sive heat, moisture and severe mechanical shocks.
Note: These products are not protected against splash water. Do not place any containers filled with water or anything with an open flame, such as a lit candle, above or near the products.

Warranty

All »xepton-NX«-devices are very reliable pro- ducts. Should a malfunction occur despite the unit having been set up and operated correctly, please contact your dealer or the manufacturer directly.
This warranty covers the repair of the product and returning it to you free of charge. It is recom- mended that you send in the product in its ori- ginal packaging, so keep the packaging for the duration of the warranty period.
The warranty does not apply to damage caused by incorrect handling or attempts to repair the unit by unauthorised persons (destruction of the seal on the unit).
Repairs will only be carried out under warranty if the completed warranty card is returned accom- panied by a copy of the dealer’s invoice/till receipt.

Always specify the product serial number in any event.

Disposal of used electrical and electronic units (applicable in the countries of the European Union and other European with

a separate collection system).
The symbol on the product or the packaging in- dicates that this product is not to be handled as ordinary household waste but has to be returned to a collecting point for the recycling of electrical and electronic units.
You protect the environment and the health of others by the correct disposal of this product.
Environment and health are endangered by in- correct disposal.
Material recycling helps to reduce the consump- tion of raw material. You will receive further infor- mation on the recycling of products from your local community, our communal disposal compa- ny or your local dealer.

 

 

Read More About This Manual & Download PDF:

Documents / Resources

AUDIOropa A-5260-0 xepton NX RX Tour [pdf] User Guide
A-5260-0 xepton NX RX Tour, A-5260-0, xepton NX RX Tour, NX RX Tour, RX Tour, Tour

References

Leave a comment

Your email address will not be published. Required fields are marked *