Burger Motorsports logo

Burger Motorsports BMS Differential Brace for 2018+ 3.3L Kia Stinger

Burger Motorsports BMS Differential Brace for 2018+ 3.3L Kia Stinger

Product Information:

The BMS Differential Brace is designed for the 2018+ 3.3L Kia Stinger and Genesis G70. It is a product that helps strengthen the rear differential, providing improved stability and performance. Last updated: 4/27/2023 Use of this product is subject to the terms and conditions posted at https://burgertuning.com/pages/terms. THIS PART IS LEGAL FOR USE ONLY IN COMPETITION RACING VEHICLES AS DEFINED UNDER CALIFORNIA LAW AND IS NOT LEGAL FOR USE IN ANY OTHER MOTOR VEHICLE. California law defines a “racing vehicle” as “a competition vehicle not used on public highways.” (Calif. Health & Safety Code 39048) This part may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event. Competition-only motor vehicles may not be driven to a racing event on a public highway and must be transported on a trailer or other carrier. USE OF THIS PART IN ANY OTHER VEHICLE MAY SUBJECT YOU TO FINES AND PENALTIES FOR VIOLATION OF FEDERAL AND/OR STATE LAW, WILL VOID YOUR WARRANTY FROM BURGER MOTORSPORTS, INC, AND CAN VOID YOUR VEHICLE’S WARRANTY. It is your responsibility to comply with all applicable federal and state laws relating to the use of this part, and Burger Motorsports, INC hereby disclaims any liability resulting from the failure to use this part in compliance with all applicable federal and state laws.

Product Usage Instructions:

  • Jack up the rear of the vehicle using either jack stands or a lift. Loosen and pull the 4 bottom bolts on the rear differential cover.Burger Motorsports BMS Differential Brace for 2018+ 3.3L Kia Stinger 1
  • After removing the lower differential bolts, install the BMS differential brace first onto the differential. Use 4 of the longest bolts provided. Don’t tighten anything down just yet until all diff brace pieces are on.Burger Motorsports BMS Differential Brace for 2018+ 3.3L Kia Stinger 2
  • Slide the smaller bracket with the two welded nuts into the rear subframe slot as shown. The L shaped bracket will be tightened down to this using two of the shortest bolts provided.Burger Motorsports BMS Differential Brace for 2018+ 3.3L Kia Stinger 3Burger Motorsports BMS Differential Brace for 2018+ 3.3L Kia Stinger 4
  • Attach the large bottom brace to the L shaped bracket using the last two of the medium length provided bolts and lock nuts.Burger Motorsports BMS Differential Brace for 2018+ 3.3L Kia Stinger 5
  • With the diff brace aligned and in place you can start tightening everything.Burger Motorsports BMS Differential Brace for 2018+ 3.3L Kia Stinger 6
  • Installation is complete!Burger Motorsports BMS Differential Brace for 2018+ 3.3L Kia Stinger 7

Documents / Resources

Burger Motorsports BMS Differential Brace for 2018+ 3.3L Kia Stinger [pdf] Instruction Manual
K8 Stinger Store, 2018 3.3L Kia Stinger, Genesis G70, BMS Differential Brace for 2018 3.3L Kia Stinger, Brace for 2018 3.3L Kia Stinger, 2018 3.3L Kia Stinger, Kia Stinger

References

Leave a comment

Your email address will not be published. Required fields are marked *