CENTEK-logo

CENTEK CT-2138 Hair Clipper

CENTEK-CT-2138-Hair-Clipper-product

Dear Customer,
Thank You for purchasing a CENTEK brand product. We guarantee the flawless function of this item, provided the guidelines of its operation are observed.

  • The hair trimmer is a home appliance and is not designed for industrial applications!
  • PURPOSE OF THE APPLIANCE: for cutting hair and haircut modeling at home.

SAFETY PRECAUTIONS

  1. Use the device only for its intended purpose.
  2. Ensure that the power supply grid voltage corresponds to the one indicated on the appliance before operating it.
  3. Do not pull the power cable (USB) if it touches sharp edges, is jammed by any objects, or is entangled.
  4. Do not route the power cable (USB) and do not place the device itself in locations with high humidity, on hot surfaces, near heating appliances, or open flames.
  5. Do not use the hair trimmer if:
    • the power cord (USB) is damaged;
    • the appliance has visible damage;
    • the appliance has been dropped;
    • the appliance has been exposed to moisture.
  6. Never wrap the power cord (USB) around the hair trimmer!
  7. Do not place the operating device on soft pillows, woolen blankets, etc.!
  8. The use of the device by children is strictly prohibited!
  9. The hair trimmer should not be used by persons suffering from illnesses related to locomotory disturbances.
  10. Ensure that the device is turned off when not in use!
  11. Do not leave the plug in the electric socket if:
    • the device doesn’t work properly or at all;
    • before and during maintenance;
    • after use.
  12. Do not pull or carry the device by the power cord (USB).
  13. Do not disconnect the trimmer from the power supply by pulling on the power cord (USB), do not pull the plug with wet hands.
  14. The appliance should not be used by physically, sensory, or mentally handicapped persons (including children) or by persons without sufficient experience or knowledge, unless such persons are under supervision, or have been instructed on the use of the appliance, by the persons responsible for their safety. Take precautions not to let children play with the appliance.
  15. Special instructions for transportation (shipment) and sale: none.

Should You decide to transfer the appliance to another person, please pass the present manual over along with it.

ATTENTION! Electric shock hazard!

  • Never use the device when your hands are wet while taking a bath or shower, hear a sink or other vessels containing liquids. If the trimmer falls into water, pull the plug from the electric socket. Do not touch water under any circumstances when the device is connected to the power supply.
  • Do not allow water condensate to penetrate into the device. Never submerse the device in the water!

ATTENTION! Danger of fire!

  • Never allow the device to come into contact with flammable liquids and combustible material.
  • In case of damage to the power cable (USB) or any other part of the appliance immediately disconnect the appliance from the power supply and apply to the Manufacturer’s service centre. In case of unskilled intervention into the appliance or non-observance of the operating requirements listed in the present manual, the warranty becomes void.

DESCRIPTION OF THE DEVICE

  1. Comb attachments (5 pcs.)
  2. ON/OFF button
  3. USB cable
  4. Razor head
  5. Stand
  6. Instrument housing
  7. Microtrimmer
  8. Nose and ear trimmer
  9. Trimmer attachment
  10. Hair clipper
  11. Brush
  12. Oil for lubrication
  13. LCD display

CENTEK-CT-2138-Hair-Clipper-fig- (1)

COMPLETENESS

  • Clipper – 1 pc.
  • Clipper nozzle – 1 pc.
  • Razor attachment – 1 pc.
  • Trimmer attachment – 1 pc.
  • Nose and ear trimmer attachment – 1 pc.
  • Stand – 1 pc.
  • USB cable – 1 pc.
  • Microtrimmer – 1 pc.
  • Comb attachment for styler – 1 pc.
  • Nozzle-comb for cutting 3 mm – 1 pc.
  • Nozzle-comb for cutting 6 mm – 1 pc.
  • Nozzle-comb for cutting 9 mm – 1 pc.
  • Nozzle-comb for cutting 12 mm – 1 pc.
  • Brush – 1 pc.
  • Oil for lubrication – 1 pc.
  • Operation manual – 1 pc.

OPERATION

CHARGER

  • Before using the appliance for the first time, it is necessary to charge the battery for 16 hours to ensure the normal operation of the machine.
  • To do this, make sure the device is switched off. Connect the cable plug to the socket on the instrument and the USB plug to the power supply.
  • The charge indicator will light up. When the battery is fully charged, the indicator will turn off.

ATTENTION!

  • Do not use the appliance in a bathtub or shower room.
  • Do not expose the device to direct sunlight or other sources of heat.
  • Use the appliance with dry hands only.
  • Do not use the instrument if the power cord is frayed or loose in the power socket on the instrument.
  • Before use, lubricate the clipper blade with the special oil that comes with the kit.

USE OF NOZZLES HAIR CUTTER

  • Attach the clipper attachment to the main body of the appliance.
  • This device has 4 additional nozzles with different cut lengths (3, 6, 9, 12 mm). Install the attachment you need.
  • Press the power button.
  • You can start cutting.

RAZOR HEAD

  • Attach the shaver head to the main body of the appliance.
  • Press the power button.
  • You can start shaving. (Note: The razor head is for use on the face or neck only.)

NOTE:
Do not press the attachment too hard against your skin while shaving – this may damage the shaver foil or harm your skin (for example, burning sensation, numbness or pain).

NOSE AND EAR TRIMMER

  • Attach the nose and ear trimmer attachment to the main body of the appliance.
  • Press the power button.
  • Place the tip of the trimmer into the nasal cavity. Make circular motions while inserting and removing the nozzle. Use the nose, ear and brow clipper to trim the brow line. You shouldn’t cut her eyebrows.

NOTE:
Make sure the nasal cavity is clean before using the nozzle. Please do not insert the tip of the trimmer into the nose and ear canal deeper than 0.5 cm.

MICROTRIMMER

  • Attach the micro trimmer attachment to the main body of the appliance.
  • Press the power button.
  • You can start modeling a beard or edging a haircut.
LCD DISPLAY
CENTEK-CT-2138-Hair-Clipper-fig- (2) REMAINING BATTERY INDICATOR
When the trimmer is on, the digital screen shows the remaining battery power and the battery symbol below is always on.
CENTEK-CT-2138-Hair-Clipper-fig- (3) CHARGING INDICATOR
  • Flashes while charging, and stays on until the charge reaches 100 %.
  • Blinks when the charge drops to 5 % to remind you to recharge the device.
CENTEK-CT-2138-Hair-Clipper-fig- (4) BLADE LUBRICATION INDICATOR
For up to 30 minutes of use, this indicator will flash every 0.5 seconds to remind you that the blade needs to be lubricated. The indication will disappear when the device is restarted.

CARE OF THE APPLIANCE

ATTENTION!

  • Make sure the instrument is turned off and the (USB) cord is unplugged from the power source.
  • Wipe the body of the instrument with a damp cloth. At the same time, make sure that moisture does not get inside the case.
  • Do not use abrasives or solvents to clean the case.
  • The device must not be cleaned by immersion in water.

CLEANING THE CLIPPING HEAD

  • Press on the top of the paddle and detach the blade from the head of the attachment.
  • Clean the nozzle of hair with a brush.
  • Place the blade back into the head of the attachment and put some oil on the blade.

CLEANING THE RAZOR HEAD

  • Remove the shaving head from the shaving head by pressing the buttons on both sides of the shaving head base.
  • Shake the shaving head to shake the hair out of it.
  • Clean the rest of the hair with a brush.
  • Put the shaver head back on until it clicks into place.

CLEANING THE NOSE AND EAR TRIMMER
Clean the nose trimmer head with a brush. Please place the body of the instrument and its accessories in the stand after cleaning to avoid damage to the instrument or loss of accessories.

SPECIFICATIONS

  • Input voltage/current: 5 VCENTEK-CT-2138-Hair-Clipper-fig- (5) 1 А
  • Power: 3 W
  • Power supply: battery Li-Ion, 600 mAh, 1,2 VCENTEK-CT-2138-Hair-Clipper-fig- (5) 0,6 А
  • Full charge time: 90 minutes

CENTEK-CT-2138-Hair-Clipper-fig- (6)

ATTENTION! Do not use this appliance near water.

DISPOSAL
Upon expiry of its service life, the appliance can be disposed of separately from ordinary domestic waste. You can turn it over to a specialized electric and electronic appliance disposal and recycling center.

CERTIFICATION DATA, GUARANTEE

The service life of this item is 5 years from the date of sale to the end user, provided the item will be used in strict accordance with the present manual and the applicable technical standards. Upon expiry of the service life please contact the nearest authorized service centre for suggestions as to the further operation of the appliance. The manufacturing date of the appliance is integrated into the serial number (digits 2 and 3 – year, digits 4 and 5 – month of manufacture). If any questions related to appliance maintenance should arise, or if the appliance malfunctions apply to the CENTEK TM Authorized Service Center. The address of the service center can be found on the website https://centek.ru/servis. Service support contacts: Phone: +7 (988) 24-00-178, VK: vk.com/centek_krd. General Service Center: OOO «Larina-Servis», Krasnodar, Phone: +7 (861) 991-05-42.

The product has the Certificate of Conformity No:
ЕАЭС RU С-CN.ВЕ02.В.04834/23 of 19.04.2023.

MANUFACTURER AND IMPORTER INFORMATION

Imported to EAEU by Individuality Predprinimatel Asrumyan Karo Shurikovich.

  • Address: Russia, 350912 Krasnodar, ul. Atamana Lysenko, 23, pgt. Pashkovskiy.
  • Phone: +7 (861) 2-600-900.

DEAR VALUED CONSUMER!
The guarantee period for all appliances amounts to 12 months from the date of sale to the end consumer. With this Warranty Card, the Manufacturer confirms the proper condition of the appliance and undertakes to repair, free of charge, all defects caused by the Manufacturer’s default.

GUARANTEE MAINTENANCE TERMS

  1. The guarantee shall be valid if the following documentation conditions are observed:
    • The original Warranty Card shall be filled out correctly and clearly, indicating the appliance model, serial number, and sale date, the stamp of the seller company and signature of its representative shall be available, as well as the stamps on each coupon and the buyer’s signature in the Warranty Card. The Manufacturer reserves the right to reject guarantee maintenance if the buyer fails to provide the abovementioned documents or if the information contained therein is incomplete, illegible, or ambiguous.
  2. The guarantee shall be valid if the following operation conditions are observed:
    • the appliance is used in strict accordance with the present manual;
    • the safety rules and requirements are observed.
  3. The guarantee does not apply to regular maintenance, cleaning, installation, and setup of the appliance at the owner’s location.
  4. The guarantee does not apply in the following cases:
    • mechanical damage;
    • normal wear of the appliance;
    • non-observance of operation requirements or erroneous actions on the part of the user;
    • improper installation or transportation;
    • natural disasters (lightning, fire, flood, etc.), as well as any other causes beyond the Manufacturer’s or Seller’s control;
    • ingress of foreign objects, liquids or insects into the inside of the appliance;
    • repairs or modifications to the appliance by unauthorized persons;
    • use of the appliance for commercial purposes (loads exceeding normal domestic application), connection of the appliance to utility and telecommunication networks incompliant with national technical standards;
    • failure of the following accessories, if replacement of these is allowed by design and does not involve disassembly of the appliance:
      • remote control units, rechargeable batteries, replaceable batteries (power cells), external power supply units, and chargers;
      • consumables and accessories (packaging, covers, slings, carry bags, mesh screens, blades, flasks, plates, supports, grilles, spits, hoses, tubes, brushes, nozzles, dust collectors, filters, smell absorbers);
    • for battery-powered appliances – operation with inappropriate or depleted batteries;
    • for rechargeable battery-powered appliances – any damage caused by improper battery charging and recharging.
  5. The present guarantee is provided by the Manufacturer in addition to the consumer rights determined by the applicable legislation and does not limit these rights in any way.
  6. The Manufacturer shall not be made liable for possible damage, directly or indirectly inflicted by CENTEK brand products on people, domestic animals, the consumer’s or third persons’ property if such damage is inflicted as the result of non-observance of appliance installation and operation requirements, deliberate or negligent actions (omission) by the consumer or third persons, as well as of force majeure circumstances.
  7. Service centers will only accept appliances in a clean state (there should be no food residues, dust, or other contamination on the appliance).

The Manufacturer reserves the right to change the design and specifications of the appliance without prior notice.

CENTEK-CT-2138-Hair-Clipper-fig- (7) CENTEK-CT-2138-Hair-Clipper-fig- (8)

Documents / Resources

CENTEK CT-2138 Hair Clipper [pdf] Instruction Manual
CT-2138 Hair Clipper, CT-2138, Hair Clipper, Clipper
CENTEK CT-2138 Hair Clipper [pdf] Instruction Manual
CT-2138, CT-2138 Hair Clipper, Hair Clipper, Clipper

References

Leave a comment

Your email address will not be published. Required fields are marked *