Whirlpool-logo

Whirlpool WFC 3C22 P X Dishwasher

Whirlpool-WFC-3C22-P-X-Dishwasher-product

DAILY REFERENCE GUIDE

THANK YOU FOR BUYING A WHIRLPOOL PRODUCT. To receive more complete assistance, please register your appliance at: www.whirlpool.eu/register

Whirlpool-WFC-3C22-P-X-Dishwasher (18)You can download the Safety Instructions and the Use and Care Guide, by visiting our website docs.whirlpool.eu and following the instructions on the back of this booklet.

Before using the appliance carefully read Health and Safety guide.

PRODUCT DESCRIPTION

APPLIANCE

Whirlpool-WFC-3C22-P-X-Dishwasher (1)

  • 1. Upper rack
  • 2. Foldable flaps
  • 3. Upper rack height adjuster
  • 4. Upper spray arm
  • 5. Lower rack
  • 6. Power Clean® support
  • 7. Cutlery basket
  • 8. Lower spray arm
  • 9. Filter Assembly
  • 10. Salt reservoir
  • 11. Detergent and Rinse Aid dispensers
  • 12. Rating plate
  • 13. Control panel

CONTROL PANEL

Whirlpool-WFC-3C22-P-X-Dishwasher (2)

  • 1. On-Off/Reset button with indicator light
  • 2. Program selection button with indicator light
  • 3. Multizone button with indicator light / Key lock
  • 4. Eco program indicator light
  • 5. Key lock indicator light
  • 6. Display
  • 7. Program number and remaining time indicator
  • 8. Tablet (Tab) indicator light
  • 9. Closed water tap indicator light
  • 10. Rinse Aid refill indicator light
  • 11. Salt refill indicator light
  • 12. Power Clean® button with indicator light / Tablet (Tab)
  • 13. Delay button with indicator light
  • 14. Start/Pause button with indicator light / Drain out

FIRST TIME USE

SALT, RINSE AID, AND DETERGENT

ADVICE REGARDING THE FIRST-TIME USE

After installation, remove the stoppers from the racks and the retaining elastic elements from the upper rack.

FILLING THE SALT RESERVOIR

The use of salt prevents the formation of LIMESCALE on the dishes and on the machine’s functional components.

  • The salt reservoir must be never empty.
  • It is important to set the water hardness.

The salt reservoir is located in the lower part of the dishwasher (see PRO-DUCT DESCRIPTION) and should be filled when the SALT REFILL indicatorWhirlpool-WFC-3C22-P-X-Dishwasher (3) light in the control panel is lit.

  1. Remove the lower rack and unscrew the reservoir cap (anticlockwise).
  2. Only the first time you do this: fill the salt reservoir with water.
  3. Position the funnel (see figure) and fill the salt reservoir right up to its edge (approximately 1 kg); it is not unusual for a little water to leak out.
  4. Remove the funnel and wipe any salt residue away from the opening.

Whirlpool-WFC-3C22-P-X-Dishwasher (4)Make sure the cap is screwed on tightly so that no detergent can get into the container during the wash program (this could damage the water softener beyond repair).

Whenever you need to add salt, it is mandatory to complete the procedure before the beginning of the washing cycle.

SETTING THE WATER HARDNESS

To allow the water softener to work entirely, it is essential that the water hardness setting is based on the actual water hardness in your house. This information can be obtained from your local water supplier.

The factory setting is for average (3) water hardness.

  • Switch on the appliance by pressing the ON/OFF button.
  • Switch off the appliance by pressing the ON/OFF button.
  • Hold down the button START/PAUSE for 5 seconds, until you hear a beep.
  • witch on the appliance by pressing the ON/OFFF button.
  • The current selection level number and the salt indicator light both flash.
  • Press button P to select the desired hardness level (see WATER HARDNESS TABLE).
Water Hardness Table
Level °dH

German degrees

°fH

French degrees

1 Soft 0 – 6 0 – 10
2 Medium 7 – 11 11 – 20
3 Average 12 – 17 21 – 30
4 Hard 18 – 34 31 – 60
5 Very hard 35 – 50 61 – 90
  • Switch off the appliance by pressing the ON/OFF button.
  • The setting is complete!

As soon as this procedure is complete, run a program without loading.

  • Only use salt that has been specifically designed for dishwashers.
  • After the salt has been poured into the machine, the SALT REFILL indicator light switches off.
  • If the salt container is not filled, the water softener and the heating element may be damaged as a result.

FILLING THE RINSE AID DISPENSER

Rinse aid makes dish DRYING easier. The rinse aid dispenser A should be filled when the RINSE AID REFILL indicator light in the control panel is lit.

Whirlpool-WFC-3C22-P-X-Dishwasher (5)

  1. Open the dispenser B by pressing and pulling up the tab on the lid.
  2. Pour in the rinse aid (max.110 ml), making sure it does not overflow from the dispenser. If this happens, clean the spill immediately with a dry cloth.
  3. Press the lid down until you hear a click to close it.

NEVER pour the rinse aid directly into the appliance tub.

ADJUSTING THE DOSAGE OF RINSE AID

If you are not completely satisfied with the drying results, you can adjust the quantity of rinse aid used.

  • Switch the dishwasher on using the ON/OFF button.
  • Switch it off using the ON/OFF button.
  • Press the button START/PAUSE three times – a beep will be heard.
  • Switch it on using the ON/OFF button.
  • The current selection level number and rinse aid indicator light flash.
  • Press button P to select the level of rinse aid quantity to be supplied.
  • Switch it off using the ON/OFF button
  • The setting is complete!

If the rinse aid level is set to 1 (ECO), no rinse aid will be supplied. The LOW RINSE AID indicator light will not be lit if you run out of rinse aid. A maximum of 5 levels can be set according to the dishwasher model. The factory setting is specific to the model, please follow the instructions above to check this for your machine.

  • If you see bluish streaks on the dishes, set a low number (2-3).
  • If there are drops of water or limescale marks on the dishes, set a mid-range number (4-5).

FILLING THE DETERGENT DISPENSER

To open the detergent dispenser use the opening device A. Introduce the detergent into the dry dispenser B only. Place the amount of detergent for pre-washing directly inside the tub.

  1. When measuring out the detergent refer to the mentioned earlier information to add the proper quantity. Inside the dispenser B, there are indications to help the detergent dosing.
  2. Remove detergent residues from the edges of the dispenser and close the cover until it clicks.
  3. Close the lid of the detergent dispenser by pulling it up until the closing device is secured in place.

Whirlpool-WFC-3C22-P-X-Dishwasher (6)The detergent dispenser automatically opens up at the right time according to the program.

If all-in-one detergents are used, we recommend using the TABLET button, because it adjusts the program so that the best washing and drying results are always achieved.

PROGRAMS TABLE

Whirlpool-WFC-3C22-P-X-Dishwasher (7)ECO program data is measured under laboratory conditions according to European Standard EN 50242.

Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following address: dw_test_support@whirlpool.com.

Pre-treatment of the dishes is not needed before any of the programs.

  • *) Not all options can be used simultaneously.
  • **) The duration of the program shown on the display or in the booklet is an estimate calculated on standard conditions. The actual time may vary depending on many factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of load, load balancing, additional selected options, and sensor calibration. The sensor calibration can increase program duration by up to 20 min.

Standby consumption: Left-on mode consumption: 6 W – Off mode consumption: 0.5 W

PROGRAMS DESCRIPTION

Instructions on wash cycle selection
  • ECO
    Normally soiled crockery. Standard program is the most efficient in terms of its combined energy and water consumption.
  • 6th SENSE®
    For normally soiled dishes with dried food residues. Senses the level of soiling on the dishes and adjusts the program accordingly. When the sensor detects the soil level an animation appears in the display and the cycle duration is updated.
  • INTENSIVE
    Program recommended for heavily soiled crockery, especially suitable for pans and saucepans (not to be used for delicate items).
  • DAILY
    Normally soiled crockery. Everyday cycle, that ensures optimal cleaning performance in a shorter time.
  • SILENT
    Suitable for night-time operation of the appliance. Ensures optimal cleaning and drying performance with the lowest noise emission.
  • RAPID 30’
    Program to be used for lightly soiled dishes with no dried food residues.
  • CRYSTALS
    Program for delicate items, which are more sensitive to high temperatures, for example, glasses and cups.
  • PRE-WASH
    Use to refresh crockery planned to be washed later. No detergent is to be used with this program.
  • Notes:
    • Please note that cycles like Rapid or 1h Wash & Dry are most effective for lightly soiled dishes.
    • To reduce consumption even further, only run the dishwasher when it is full.

OPTIONS AND FUNCTIONS

OPTIONS can be selected directly by pressing the corresponding button (see CONTROL PANEL).

If an option is not compatible with the selected program see PROGRAMS TABLE, the corresponding LED flashes rapidly 3 times and beeps will sound. The option will not be enabled.

Whirlpool-WFC-3C22-P-X-Dishwasher (8)MULTIZONE

  • If there are not many dishes to be washed, a half-loading may be used in order to save water, electricity and detergent.
  • Select the program and then press the MULTIZONE button: the indicator over the button lights up and the symbol of the chosen rack will appear on the display. By default the appliance washes dishes in all racks.
  • To wash only the specific rack, press this button repeatedly:
    • Whirlpool-WFC-3C22-P-X-Dishwasher (9)shown on the display (only the lower rack)
    • Whirlpool-WFC-3C22-P-X-Dishwasher (10)shown on the display (only the upper rack)
    • Whirlpool-WFC-3C22-P-X-Dishwasher (11)shown on the display (the option is OFF and the appliance will wash dishes in all racks).
  • Remember to load the upper or lower rack only, and to reduce the amount of detergent accordingly.

Whirlpool-WFC-3C22-P-X-Dishwasher (12)KEYLOCK

  • A long press (for 3 seconds) of the MULTIZONE button, will activate the KEYLOCK function. The KEYLOCK function will block the control panel except the ON/OFF button. To deactivate the KEYLOCK, long press again.

Whirlpool-WFC-3C22-P-X-Dishwasher (13)POWER CLEAN®

  • Thanks to the additional power jets this option provides a more intensive and powerful wash in the lower rack, in the specific area. This option is recommended for washing pots and casseroles. Press this button to activate POWER CLEAN® (the indicator lights up).

Whirlpool-WFC-3C22-P-X-Dishwasher (14)TABLET

  • This setting allows you to optimize the performance of the program according to the type of detergent used.
  • A long press (for 3 seconds) of the POWER CLEAN® button, will activate the function (the corresponding symbol will light up) if you use combined detergents in tablet form (rinse aid, salt, and detergent in 1 dose).
  • If you use powder or liquid detergent, this option should be off.

Whirlpool-WFC-3C22-P-X-Dishwasher (15)DELAY

The start of the program may be delayed for some time between 0:30 and 24 hours.

  1. Select the program and any desired options. Press the DELAY button (repeatedly) to delay the start of the program. Adjustable from 0:30 to 24 hours. With each press of the button, the delay starts increasing by 0:30 if the selection is below 4 hours, 1:00 if the selection is below 12 hours, and 4 hours if the selection is above 12 hours. If 24  hours are reached, and the button is pressed, the delayed start is deactivated.
  2. Press the START/PAUSE button: and the timer will begin counting down;
  3. Once this time has elapsed, the indicator light switches off and the program begins automatically.

If at the time of the countdown, the START/PAUSE button is pressed again the DELAY option is cancelled and the selected program starts automatically.

The Delay function cannot be set once a wash cycle has been started.

Whirlpool-WFC-3C22-P-X-Dishwasher (16)WATER TAP CLOSED – Alarm

  • Flashes when there is no inlet water or the water tap is closed.

Whirlpool-WFC-3C22-P-X-Dishwasher (17)DRAIN OUT

  • To stop and cancel the active cycle, the Drain Out function can be used.
  • A long press of the START/PAUSE button will activate the DRAIN OUT function. The active program will be stopped and the water in the dishwasher will be drained out.

NaturalDry

NaturalDry is a convection drying system that automatically opens the door during/after the drying phase to ensure exceptional drying performance every day. The door opens at a temperature that is safe for your kitchen furniture, the door will not be opened when the options of SANI RINSE, POWER CLEAN® or TURBO are on.

As additional steam protection, specially designed protection foil is added together with the dishwasher. To see how to mount protection foil please refer to (INSTALLATION GUIDE).

NaturalDry functionality could be disabled by the user as follows:

  • To DISABLE: Switch On, then switch Off. Keep the P button pressed for 5 sec., at the end of 5 sec the dishwasher plays a long beep. Switch On the machine, the display shows „oOF”
  • To ENABLE: Switch On, then switch Off the machine. Keep the P button pressed for 5 sec., at the end of 5 sec the dishwasher plays a long beep. Switch On the machine, the display shows „oOn”

DAILY USE

  • CHECK WATER CONNECTION
    Check that the dishwasher is connected to the water supply and that the tap is open.
  • SWITCH ON THE DISHWASHER
    Press the ON/OFF button.
  • LOAD THE RACKS
    (see LOADING THE RACKS).
  • FILLING THE DETERGENT DISPENSER
    (see PROGRAMS TABLE).
  • CHOOSE THE PROGRAM AND CUSTOMISE THE CYCLE
    • Select the most appropriate program by the type of crockery and its soiling level (see PROGRAMS DESCRIPTION) by pressing the P button.
    • Select the desired options (see OPTIONS AND FUNCTIONS).
  • START
    Start the wash cycle by pressing the START/PAUSE button. When the program starts you hear a beep.
  • END OF WASH CYCLE
    • The end of the wash cycle is indicated by beeps and the display shows END.
    • Open the door and switch off the appliance by pressing the ON/OFF button.
    • Wait for a few minutes before removing the crockery – to avoid burns.
    • Unload the racks, beginning with the lower one.
  • MODIFYING A RUNNING PROGRAM
    • If a wrong program was selected, it is possible to change it, provided that it has only just begun: press and hold the ON/OFF button, and the machine will switch off.
    • Switch the machine back on using the ON/OFF button and select the new wash cycle and any desired options; start the cycle by pressing the START/PAUSE button.
  • ADDING EXTRA CROCKERY
    Without switching off the machine, open the door (beware of HOT steam!) and place the crockery inside the dishwasher. Close the door and press the START/PAUSE button the cycle will begin from the point at which it was interrupted.
  • ACCIDENTAL INTERRUPTIONS
    • If the door is opened during the wash cycle, or if there is a power cut, the cycle stops. Once the door has been closed or the electricity supply is restored, to start again the cycle from where it was interrupted, press the START/PAUSE button.
    • For more information about the functions, you can request or download from the WEB a Use & Care Guide by following the instructions on the last page.Whirlpool-WFC-3C22-P-X-Dishwasher (18)

The machine will switch off automatically during certain extended periods of inactivity, to minimize electricity consumption. If the crockery is only lightly soiled or if it has been rinsed with water before being placed in the dishwasher, reduce the amount of detergent used accordingly.

ADVICE AND TIPS

  • TIPS
    • Before loading the baskets, remove all food residues from the crockery and empty the glasses. You do not need to rinse beforehand under running water.
    • Arrange the crockery so that it is held in place firmly and does not tip over; and arrange the containers with the openings facing downwards and the concave/convex parts placed obliquely, thus allowing the water to reach every surface and flow freely.
    • Warning: lids, handles, trays, and frying pans do not prevent the sprayer arms from rotating. Place any small items in the cutlery basket. Very soiled dishes and pans should be placed in the lower basket because in this sector the water sprays are stronger and allow a higher washing performance.
    • After loading the appliance, make sure that the sprayer arms can rotate freely.
  • HYGIENE
    To avoid odour and sediment which can be accumulated in the dishwasher please run a high-temperature program at least once a month. Use a teaspoon of detergent and run it without the loading to clean your appliance.
  • UNSUITABLE CROCKERY
    • Wooden crockery and cutlery.
    • Delicately decorated glasses, artistic handicrafts, and antique crockery. Their decorations are not resistant.
    • Parts in synthetic material that do not withstand high temperatures.
    • Copper and tin crockery.
    • Crockery soiled with ash, wax, lubricating grease, or ink. The colors of glass decorations and aluminum/silver pieces can change and fade during the washing process. Some types of glass (e.g. crystal objects) can become opaque after some wash cycles too.
  • DAMAGE TO GLASS AND CROCKERY
    • Only use glasses and porcelain guaranteed by the manufacturer as dishwasher safe.
    • Use a delicate detergent suitable for crockery.
    • Collect glasses and cutlery from the dishwasher as soon as the wash cycle is over.

LOADING THE RACKS

UPPER RACK

Load delicate and light dishes: glasses, cups, saucers, and low salad bowls.         Whirlpool-WFC-3C22-P-X-Dishwasher (19)(loading example for the upper rack)

ADJUSTING THE HEIGHT OF THE UPPER RACK

The height of the upper rack can be adjusted: a high position to place bulky crockery in the lower basket and a low position to make the most of the tip-up supports by creating more space upwards and avoiding collision with the items loaded into the lower rack. The upper rack is equipped with an Upper Rack height adjuster (see figure), without pressing the levers, lift it up by simply holding the rack sides, as soon as the rack is stable in its upper position.

Whirlpool-WFC-3C22-P-X-Dishwasher (20)

  • To restore to the lower position, press the levers
  • A at the sides of the rack and move the basket downwards.
  • We strongly recommend that you do not adjust the height of the rack when it is loaded.
  • NEVER raise or lower the basket on one side only.

FOLDABLE FLAPS WITH ADJUSTABLE POSITION

The side foldable flaps can be positioned at three different heights to optimize the arrangement of crockery inside the rack. Wine glasses can be placed safely in the foldable flaps by inserting the stem of each glass into the corresponding slots. For optimum drying results incline the foldable flaps more. To change the inclination, pull up the foldable flap, slide it slightly, and position it as you wish.Whirlpool-WFC-3C22-P-X-Dishwasher (21)LOWER RACK

For pots, lids, plates, salad bowls, cutlery etc. Large plates and lids should ideally be placed at the sides to avoid interferences with the spray arm. The lower rack has tip-up supports which can be used in a vertical position when arranging plates or in a horizontal position (lower) to load pans and salad bowls easily. Whirlpool-WFC-3C22-P-X-Dishwasher (22)(loading example for the lower rack)

CUTLERY BASKET

The modular basket is equipped with top grilles for improved cutlery arrangement. The cutlery basket should be positioned only at the front of the lower rack. Whirlpool-WFC-3C22-P-X-Dishwasher (23)Knives and other utensils with sharp edges must be placed in the cutlery basket with the points facing downwards or they must be positioned horizontally in the tip-up compartments on the upper rack.

POWER CLEAN®
  • Power Clean® uses the special water jets in the rear of the cavity to wash more dirty items. The lower rack has a
  • Space Zone, a special pull-out support in the rear of the rack that can be used to support frying pans or baking pans in an upright position, thus taking up less space.
  • Placing the pots/casseroles faced to the Power Clean® component please activate the POWER CLEAN® on the panel.

Whirlpool-WFC-3C22-P-X-Dishwasher (24)

How to use Power Clean®:Whirlpool-WFC-3C22-P-X-Dishwasher (25)

  1. Adjust the Power Clean® area G by folding down the rear plate holders to load pots.
  2. Load pots and casseroles inclined vertically in Power Clean® area. Pots have to be inclined towards the power water jets.

CARE AND MAINTENANCE

CLEANING THE FILTER ASSEMBLY

Regularly clean the filter assembly so that the filters do not clog and that the waste water flows away correctly. The filter assembly consists of three filters that remove food residues from the washing water and then recirculate the water: to obtain the best washing results, you need to keep them clean.

The dishwasher must not be used without filters or if the filter is loose.

After several washes, check the filter assembly and if necessary clean it thoroughly under running water, using a non-metallic brush and follow the instructions below:

  1. Turn the cylindrical filter A in an anti-clockwise direction and pull it out (Fig 1).
  2. Remove the cup filter B by exerting a slight pressure on the side flaps (Fig 2).
  3. Slide out the stainless-steel plate filter C (Fig 3).
  4. Inspect the trap and remove any food residues. NEVER REMOVE the wash-cycle pump protection (black detail) (Fig 4).

Whirlpool-WFC-3C22-P-X-Dishwasher (26)

After cleaning the filters, re-place the filter assembly and fix it in position correctly; this is essential for maintaining the efficient operation of the dishwasher.

CLEANING THE SPRAY ARMS

On occasions, food residue may become encrusted onto the spray arms and block the holes used to spray the water. It is therefore recommended that you check the arms from time to time and clean them with a small non-metallic brush. Whirlpool-WFC-3C22-P-X-Dishwasher (27)To remove the upper spray arm, turn the plastic locking ring in an anticlockwise direction. The upper spray arm should be replaced so that the side with the greater number of holes is facing upwards. Whirlpool-WFC-3C22-P-X-Dishwasher (28)

The lower spray arm may be removed by pulling it upwards.

CLEANING THE WATER INLET HOSE

If the water hoses are new or have not been used for an extended period, let the water run to make sure it is clear and free of impurities before performing the necessary connections. If this precaution is not taken, the water inlet could become blocked and damage the dishwasher.

TROUBLESHOOTING

Your dishwasher may not work properly.

Before contacting the Service Centre check if the problem can be solved by going through the following list.

PROBLEMS POSSIBLE CAUSES SOLUTIONS
The dishwasher won’t start

or does not respond to commands.

The appliance has not been plugged

in properly.

Insert the plug into the socket.
Power outage. The dishwasher starts automatically when the power returns.
The dishwasher door is not closed.  Vigorously push the door until you hear the “click”.
It does not respond to commands. Switch off the appliance by pressing the ON/OFF button, switch it back on after approximately one minute, and reset the program.
The dishwasher won’t drain. The wash cycle has not finished yet. Wait until the wash cycle finishes.
The drain hose is bent. Check that the drain hose is not bent (see INSTALATION INSTRUCTION).
The sink drain pipe is blocked. Clean the sink drain pipe.
The filter is clogged up with food

residues.

Clean the filter (see CLEANING THE FILTER ASSEMBLY).
The dishwasher makes excessive noise. The dishes are rattling against each Position the crockery correctly (see LOADING THE RACKS).
 

An excessive amount of foam has been produced.

The detergent has not been measured out correctly or it is not suitable for use in dishwashers (see FILLING THE DETERGENT DISPENSER). Reset the dishwasher by pressing the DRAIN button (see OPTIONS AND FUNCTIONS) and run the new program without detergent.
The dishes are not clean. The crockery has not been arranged

properly.

Arrange the crockery correctly (see LOADING THE RACKS).
The spray arms cannot rotate freely, being hindered by the dishes. Arrange the crockery correctly (see LOADING THE RACKS).
The wash cycle is too gentle. Select an appropriate wash cycle (see PROGRAMS TABLE).
An excessive amount of foam has been produced. The detergent has not been measured out correctly or it is not suitable for use in dishwashers (see FILLING THE DETERGENT DISPENSER).
The cap on the rinse aid compartment has not been shut correctly. Make sure the cap of the rinse aid dispenser is closed.
The filter is soiled or clogged. Clean the filter assembly (see CARE AND MAINTENANCE).
There is no salt. Fill the salt reservoir (see FILLING THE SALT RESERVOIR).

MAINTENANCE AND TROUBLESHOOTING GUIDE

For more information, maintenance procedures, and troubleshooting, see the Use and Care Guide

The Use and Care Guide can be obtained by:

  • After-Sales Service; phone number see in the warranty booklet.
  • download from the website: docs.whirlpool.eu
  • use QR code

Whirlpool-WFC-3C22-P-X-Dishwasher (29)

TECHNICAL DATASHEET

The technical data containing the energy consumption data can be downloaded from the website: docs.whirlpool.eu

CONTACTING AFTER-SALES SERVICE

When you contact the After-Sales Service, you must provide the codes shown on the rating plate attached to the left or right side inside the door of the dishwasher.

Whirlpool-WFC-3C22-P-X-Dishwasher (30)

The phone number is listed in the warranty booklet or on the website: www.whirlpool.euWhirlpool-WFC-3C22-P-X-Dishwasher (31)

FREQUENTLY ASKED QUESTIONS

What are the dimensions of this dishwasher?

The dimensions of the dishwasher are HxWxD: 850x600x590 mm.

Does this dishwasher come with a digital display for easy operation?

Yes, it features a digital display for user convenience and easy program selection.

How does the Whirlpool WFC 3C22 P X Dishwasher achieve its energy efficiency?

The dishwasher achieves its energy efficiency through features like 6th Sense Technology, which optimizes resource usage based on soiling level, and the A++ energy rating, indicating lower energy consumption.

Is this dishwasher suitable for a large family?

Yes, with 14 place settings, this dishwasher is well-suited for larger families, as it can accommodate a substantial number of dishes in a single cycle.

Does it have a quick wash or express cycle for faster cleaning?

Yes, the dishwasher offers an Express cycle, which is designed for quicker washing when you need to clean dishes in less time.

What is the annual water consumption for this dishwasher?

The dishwasher has an annual water consumption of approximately 2660 liters, which is relatively efficient for a dishwasher of its capacity.

How does the Super Silent feature work, and why is it important?

The Super Silent feature ensures that the dishwasher operates quietly. This is important to avoid disrupting the peace in your kitchen and home while the dishwasher is running.

Can I use the dishwasher with natural drying without the aid of heated drying elements?

Yes, the NaturalDry feature allows you to achieve better and more natural drying without the use of heated drying elements, enhancing energy efficiency.

Does the dishwasher come with a cutlery basket for silverware and utensils?

Yes, it includes a cutlery basket for organizing and washing silverware and utensils effectively.

What are the dimensions of the dishwasher's niche requirements?

The minimum niche height is 820 mm, and the maximum niche height is 900 mm. The minimum and maximum niche width is both 600 mm, and the niche depth is 590 mm.

Can I use the dishwasher with hard water, or does it require a water softener?

Dishwashers generally perform better with soft water to prevent mineral deposits on dishes and internal components. If you have hard water, you may consider using a water softener or dishwasher detergent specifically designed for hard water.

Can I use this dishwasher for delicate glassware and dishes?

Yes, the dishwasher provides specific programs such as Glass 45°C for washing delicate glassware at lower temperatures to avoid damage.

DOWNLOAD THE PDF LINK: Whirlpool WFC 3C22 P X Dishwasher Quick Start Guide

References

Leave a comment

Your email address will not be published. Required fields are marked *